Jotun Pilot WF is a one component water borne acrylic topcoat that is a versatile, fast drying product for exterior and interior use. It has a glossy finish with good gloss retention and dries down to 10°C but tolerates to freeze in shorter periods of time, e.g. under transportation.
1,800+ colours available from RAL, NCS, British Standard and Jotun
Price Band 4 and 6 only available in 18L
Price Band 5 only available in 4.5L
Product customisation
Don't forget to save your customization to be able to add to cart
Jotun Pilot WF is a one component water borne acrylic topcoat that is a versatile, fast drying product for exterior and interior use. It has a glossy finish with good gloss retention and dries down to 10°C but tolerates to freeze in shorter periods of time, e.g. under transportation.
Jotun Pilot WF is ideal for new construction or maintenance where fast dry to handle and over coating times are required. It should be used as a topcoat in atmospheric environments and it is part of a complete water borne system with a recommended Jotun water borne primer. This product is part of a complete system which is certified not to spread surface flames and meets LEED® v4 (2014) requirements for VOC content and VOC emissions.
Jotun Pilot WF is suitable for a wide range of industrial and marine structures, structural steel, piping, engine rooms and concrete to be exposed to corrosive environments up to C3. Recommended for refineries, power plants, bridges, buildings and mining equipment as well as for accommodation and working spaces.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Hi! The product description mentions use with a "recommended Jotun water borne primer". I can't find a Jotun water-based primer on the site, can you recommend a primer for use with this paint on carbon steel?
Answer:
Assuming the carbon steel is clean, dry and sound we can recommmend Jotun Penguard WF, this is an epoxy primer suitable for use with Jotun Pilot WF.
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3).
Please click here for important information about these kits.
Kit Contents:
SET 1 (Hand Tools)
1 x Rust-Oleum...
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
Colourmatch Service Disclaimer
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage