International Interfine 878 is a high performance, two component, high solids finish which contains no free isocyanates, offers compliance to current VOC legislation, and affords extended lifetime to first maintenance when utilised as part of a high performance anticorrosive system.
A step change in long term colour and gloss compared to catalysed acrylic and polyurethane topcoats
Enhanced aesthetics and durability provides extended lifetime to first maintenance when utilized as part of a high performance anti-corrosive system
Extensive colour range from the Chromascan® remote tinting system
Ideally suited for both roller and spray application
Very low VOC content which assists in reducing solvent emissions and complies to VOC legislation
Excellent long term flexibility versus epoxy containing finishes makes Interfine® 878 ideal for use on tanks, vessels, cranes and other such structures likely to be subjected to movement
4,800+ colours, inc. RAL, RAL Design & Effect, BS, NCS & the new NCS 2050 colours
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cart
International Interfine 878 is a high performance, two component, high solids finish which contains no free isocyanates, offers compliance to current VOC legislation, and affords extended lifetime to first maintenance when utilised as part of a high performance anticorrosive system.
International Interfine 878 offers superior gloss and colour retention and provides significantly improved resistance to yellowing & chalking when compared to typical conventional topcoats including catalysed acrylic, and polyurethane finishes.
Intended Uses:
International Interfine 878 is a tough, hard wearing finish coat for application over properly primed surfaces, which exhibits good flexibility, abrasion resistance, and affords protection against spills and splashes of a range of chemicals such as acids, alkalis, solvents, and salt solutions. Suitable for application by spray and roller, in both factory new construction and site maintenance application situations, and is an ideal solution where legislation prevents the use of isocyanates, or restricts solvent emission levels.
For use in those market sectors where high standards of cosmetic appearance and aesthetics are a key requirement. These include high performance steel constructions such as sports stadia, bridges, offshore platforms, FPSO vessels, tank farms, chemical and petrochemical plants, pulp and paper mills, and the power industry, in addition to general industrial and commercial steelwork where aesthetics are important.
Features & Benefits:
A high performance, high solids acrylic polysiloxane finish
A step change in long term colour and gloss compared to catalysed acrylic and polyurethane topcoats
Enhanced aesthetics and durability provides extended lifetime to first maintenance when utilized as part of a high performance anti-corrosive system
Extensive colour range from the Chromascan® remote tinting system
Ideally suited for both roller and spray application
Very low VOC content which assists in reducing solvent emissions and complies to VOC legislation
Excellent long term flexibility versus epoxy containing finishes makes Interfine® 878 ideal for use on tanks, vessels, cranes and other such structures likely to be subjected to movement
International Interfine 878 has the following specification approvals;
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
International Interfine 878 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
International Intercure 200 is a two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions. A high solids, low VOC product.
As a primer for steelwork intended for use in a wide range of aggressive environments,...
A fast drying reputation isn`t all International Intercure 200HS is renowned for. Complete with MIO, this fast cure anti-corrosive primer/intermediate with added barrier protection, can improve your productivity and lower your solvent emissions.
Primer and intermediate in just one coat
Rapid recoat times
Low temperature cure, cures down...
International Intergard 475HS is a low VOC, high solids, high build, two component epoxy coating. Available with conventional pigmentation, or alternatively can be pigmented with micaceous iron oxide to provide enhanced overcoating properties.
High solids epoxy intermediate
Micaceous Iron Oxide variant for additional barrier protection...
International Thinner/Equipment Cleaner GTA007 is used for thinning compatible International products. It can also be used for the general cleaning of surafces and equipment after using the associated paint or coating.
More Information Delivery Info
International Interplus 356 is a low VOC, two component, internally flexibilised, high build, low temperature curing (down to -5°C, 23°F), surface tolerant epoxy primer, metallic pigmented with aluminium and lamellar micaceous iron oxide for increased corrosion resistance.
A high performance maintenance coating for use on a wide variety of...
International Interseal 670HS is a low VOC, two component high build, high solids surface tolerant epoxy maintenance coating, for application to a wide variety of substrates including hand prepared rusty steel, abrasive blast cleaned and hydroblasted steel, and a wide range of intact, aged coatings.
4,800+ colours, inc. RAL, RAL Design...
International Interzone 954 is a two component, low VOC, high solids, modified epoxy barrier coat designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and slightly damp surfaces.
A high film build, high...
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3).
Please click here for important information about these kits.
Kit Contents:
SET 1 (Hand Tools)
1 x Rust-Oleum...