- There are no more items in your cart
- Shipping Calculated at checkout
- Total £0.00
OPEN AS USUAL DURING LOCKDOWN #3
International Intergard 740
ECA914
International Intergard 740 is a two component epoxy finish coat.
- Suitable for brush, roller and spray application
- Suitable for use in a wide range of environments including offshore structures, petrochemical facilities, bridges, pulp and paper mills, and the power industry
- Available in a range of RAL & BS colours
**Available for delivery - see Delivery Options below**
Description
International Intergard 740 is a two component epoxy finish coat suitable for brush, roller and spray application, suitable for use in a wide range of environments including offshore structures, petrochemical facilities, bridges, pulp and paper mills, and the power industry.
International Intergard 740 is intended for use as a tough, hard wearing finish for application over properly primed surfaces. Exhibits good abrasion resistance, and affords good protection against spills and splashes of a range of chemicals such as acids, alkalis, solvents, and salt solutions.
Product Details
ECA914
Data sheet
- Manufacturer
- International
- For Use On
- Metal, Brickwork, Plaster, Cement, Concrete
- Application Method
- Brush, Roller, Spray
- Sheen
- Gloss
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L, 20L
- Application
- Brush, Roller, Spray
- Coverage
- 10.2m² per litre
- Touch Dry
- 3 Hours
- UN Number
- UN1263
 Gareth HAWKINS on 2019-07-04 07:07:04 | Question:
Hi, How many coats can be applied? At what intervals between recoating? Is there a maximum time? Thanks in advance, Gareth |
Answer:
Answers to these points can be found on page 1 of the product data sheet available to download from the 'Attachments' tab on the product page. | |
| Jim on 2018-08-29 20:57:23 | Question: What is the mixing ratio of part A (Intergard 740) to part B (Intergard 740) ? Thank you. |
Answer: Mixing ratio is 4 parts (Part A) : 1 part (Part B) by volume. | |
