These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Sherwin-Williams Acrolon C237
Sherwin-Williams Acrolon C237 (formerly Resistex C237) is a high performance fast drying acrylic urethane sheen finish for use where long term exterior colour retention characteristics are required. It is suitable for use as final coat or coats in conjunction with epoxy or polyurethane based protective systems for new construction or maintenance purposes.
- Available in 450+ colours
Product customisationDon't forget to save your customization to be able to add to cart
Sherwin-Williams Acrolon C237 (formerly Resistex C237) is a high performance fast drying acrylic urethane sheen finish for use where long term exterior colour retention characteristics are required. It is suitable for use as final coat or coats in conjunction with epoxy or polyurethane based protective systems for new construction or maintenance purposes
- Network Rail Item No. 7.3.1.
Recommended Primers & Topcoats
- Compatible with a wide range of Macropoxy, Dura-plate, Zinc Clad Epoxy Primers and Buildcoats.
- Topcoats are not normally required but indefinitely overcoatable with itself and other high performance topcoats.
Application Conditions & Overcoating
This material should preferably be applied at temperatures in excess of 10oC. In conditions of high relative humidity, ie 80-85% good ventilation conditions are essential. Substrate temperature shall be at least 3oC above the dew point and always above 0°C.
At application temperatures below 10°C, drying and curing times will be significantly extended, and spraying characteristics may be impaired.
Application at ambient air temperatures below 5°C is not recommended.
If it is desired to overcoat outside the times stated on the data sheet, please seek advice of Sherwin-Williams.
Recommended Applications Methods
Recommended Thinner: Cleanser/Thinner No 5 (for cleaning) Cleanser/Thinner No15 (for thinning)
- For Use On
- Application Method
- Brush, Roller, Spray
- Mid Sheen
- Fully Tintable
- Single, Two or Three Pack
- Product Certifications
- Network Rail Item No. 7.3.1
- Pack Size
- 5L, 20L
- Brush, Roller, Spray
- 10.8m² per litre
- Touch Dry
- 1.5 Hours
- UN Number
|steven lewer-sotiriou on 2019-03-28 07:52:02|| |
Can this be put into an aerosol?
Answer from Rawlins’ Technical Team: