Jotun Hardtop Pro is a low VOC, high volume solids, isocyanate free, economical polysiloxane topcoat for offshore structures, tank farms, refineries, power plants, bridges and buildings.
Very good colour and gloss retention
Very good abrasion resistance
Very good chemical resistance
Low VOC and high volume solids
Isocyanate free
Now available in 1,700+ colours, including RAL, NCS, BS and Jotun Colours
Product customisation
Don't forget to save your customization to be able to add to cart
Jotun Hardtop Pro beautifies and protects your asset for a long time and in a sustainable way through its very good colour and gloss retention, superior chemical and abrasion resistance and by being isocyanate free. Jotun Hardtop Pro has excellent application properties by brush, roller and airless spray making it the perfect choice for both new construction and maintenance projects in temperatures down to 0°C.
Jotun Hardtop Pro is a two component chemically curing acrylic polysiloxane coating, the product does not contain isocyanates. It has a high gloss finish and has excellent gloss and colour retention. Jotun Hardtop Pro has very good mechanical properties and chemical resistance and is intended to be used as topcoat in atmospheric environments. As a high solids product it is fully recoatable at any stage of curing, even curing down to 0°C.
Typical Uses
Protective: Recommended for offshore structures, tank farms, refineries, power plants, bridges and buildings. Recommended for topside, deck and superstructure. Suitable for a wide range of industrial structures.
Marine: Recommended for topside, deck and superstructure.
Approvals and Certificates
Pre-qualified in accordance with NORSOK M-501, Edition 6, System 1.
Additional certificates and approvals may be available on request.
Features & Benefits
Very good colour and gloss retention
Very good abrasion resistance
Very good chemical resistance
Low VOC and high volume solids
Isocyanate free
Primers Jotun Hardtop Pro provides high performance corrosion protection in coating systems together with epoxy, zinc silicate, zinc epoxy, epoxy mastic, polyurethane, polysiloxane and two component acrylic primers for a wide range of purposes.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3).
Please click here for important information about these kits.
Kit Contents:
SET 1 (Hand Tools)
1 x Rust-Oleum...
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
Colourmatch Service Disclaimer
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates and do not take into account any substrate deviations or wastage