Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Sherwin-Williams Macropoxy M455V2 (formerly known as Epigrip M455V2) is a high performance 2-pack epoxy protective finish for structural steel. It is suitable for use in marine, chemical or other aggressive environments, but not immersed conditions.
Sherwin-Williams Macropoxy M455V2 (formerly known as Epigrip M455V2) is a high performance 2-pack epoxy protective finish for structural steel. Macropoxy M455V2 is used as a single coat shop applied protective finish for structural steel.Â
It is suitable for use in marine, chemical or other aggressive environments, but not immersed conditions.
Not normally required. If however overcoating is necessary, Macropoxy M455V2 may be overcoated with a wide range of materials, please consult Technical Team for advice.Â
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
A topcoat for steel or concrete in a two or three coat system, providing excellent film properties, high gloss and good weatherability. Provides very good corrosion protection with a suitable primer system. Top Features Single component Fast drying Low VOC
A quick drying, high quality water based paint incorporating traditional and new technology that will stay white even under heat.
Rust-Oleum 9996 Rust-O-Thane Accelerator is a special additive to reduce the drying time of the Rust-Oleum 9600 Rust-O-Thane Polyurethane.
Sherwin-Williams Envirolastic 940 DTM is a high build, single coat, direct-to-metal polyaspartic urethane coating for application to steel in industrial environments.
Jotun Pioner Topcoat is a one component physically drying acrylic coating that has a semi gloss finish with good gloss retention. It is fast drying and is to be used as topcoat in atmospheric environments. Jotun Pioner Topcoat is recommended for marine topside and superstructure areas and for a wide range of industrial structures.
Sherwin-Williams Acrolon C750V2 (formerly known as Leighs C750V2) is an isocyanate free, two-pack finish coat for exterior exposed surfaces where retention of gloss is required, and the use of isocyanate products is precluded or undesirable. Sherwin-Williams Acrolon C750V2 is normally used in conjunction with epoxy primers and undercoats and is Highways...
Cromadex AQ60 Two Pack Waterbased Polyurethane Topcoat is a two pack water based polyurethane topcoat with excellent exterior durability and chemical resistance. The product exhibits excellent colour and gloss retention adding value to the finished article. Available in a wide range of colours and gloss levels, including BS, RAL and special matches all in...
Cromadex 943 Acrylic Stoving Topcoat is a stoving topcoat with direct metal adhesion, helping to reduce application costs. It has good exterior durability making it suitable for many applications. Available in a wide range of colours and gloss levels, including BS, RAL, metallics, sparkles and special matches all in a lead free finish. Life expectancy of...
International Interthane 990 is a two component acrylic polyurethane finish giving excellent durability and long term recoatability. Across the world, people are experiencing flexible application, extended recoat windows and reduced surface preparation costs with International Interthane 990Â in both new construction and as a maintenance finish.
An aluminium-pigmented, low temperature curing mastic for steel, designed for cold weather applications down to 0 °F (-18 °C). This unique coating provides excellent corrosion resistance over existing finishes and rusted or SSPC-SP2 or SP3 cleaned steel. Top Features Single coat application characteristics Suitable as a topcoat VOC...
A universal clear finish compatible with primed steel, clean metals and concrete. This two-component finish is an engineered polysiloxane clearcoat that has high durability in challenging environments. Top Features Easily cleaned Resists graffiti High solids, low VOC Isocyanate free
Eagle Aluminium Paint, a topcoat for bitumen coatings and substrates that provides protection against solar degradation and heat gain with a solar-reflective finish. Dry in approx. 1 hour For use on: Bituminous coatings Aged asphalt Primed steel Apply by brush or mohair roller Requires just 2 coats
Cromadex 642 Two Pack Polyurethane Medium Texture Topcoat is a two pack polyurethane medium texture topcoat with excellent exterior durability and chemical resistance. The product offers a medium texture appearance for an aesthetic finish. Demonstrates good mar resistance, ideal if the end product is to be widely handled. The addition of Rapidcure can...
