Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Sherwin-Williams Transgard TG169 is a high performance fast drying acrylic urethane semi-gloss finish for use where long term exterior colour retention characteristics are required.Â
Sherwin-Williams Transgard TG169 is a high performance fast drying acrylic urethane semi-gloss finish for use where long term exterior colour retention characteristics are required.Â
It is suitable for use as final coat or coats in conjunction with epoxy or polyurethane based protective systems for new construction or maintenance purposes. Transgard TG169 has good tolerance to low temperature curing conditions.Â
Highways Agency Item No. 169Â
Transgard TG112, TG121, M905, TG123, C123Â
Not normally required, but indefinitely overcoatable with itself and other high performance topcoats.Â
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
International Interlac 665 is a single component alkyd gloss enamel finish. International Interlac 665 is a maintenance coating for use in a wide range of industrial environments including offshore, petrochemical and chemical plants.Â
Alu ZM, a quick-drying one-pack coating for use as an aluminium topcoat on Zinga or applied directly onto old, uncorroded hot-dip galvanised or thermal sprayed zinc substrates. One pack system Topcoat for Zinga Apply by brush or sprayer Not to be applied by a roller Touch dry in 25 minutes, full cured in 24 hours
PPG AquaCover 40 (also known as Sigma Aquacover 40) is a one-component, waterborne acrylic dispersion finish with good weather resistance and excellent adhesion to primed steel. Top Features & Benefits Particularly suitable when solvents are not permitted because of health and safety reasons Good weather resistance Good color...
Carboline Carboxane 2000 Topcoat is a two pack modified silane multi-polymer, and is a high performance, multi-purpose finishing product, allowing reduced coating specification in corrosion protection. It also adds a new dimension to finishing over Nullifire fire protection.
Coo-Var Gold Paint is a versatile finishing metallic paint that gives a gloss finish where a fast-drying finish is required. ADVANTAGES Rust resistant Interior/Exterior use Touch dries in 30 minutes Versatile Gloss finish Decorative
Specially formulated to provide a hardwearing finish with increased flexibility meaning it lasts longer than ordinary gloss paints.
Nu-Base PU Floor Finish has the power to withstand tough applications, where temperatures may reach 150°C, or where chemicals may be present. Advantages Excellent for industrial flooring. Two pack solvent-based. FeRFA Class Type 2. Excellent for industrial flooring.
A high performance two pack epoxy solvent-based micaceous iron oxide coating and finish for use as an intermediate build coat or finish on suitably primed steel and non-ferrous substrates. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004 Advantages Recoatable after long periods of exposure Conforms with parts KU1 C/D and KF 1 E/F...
A high performance single pack chlorinated rubber gloss finish with excellent chemical & water resistance. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Resistant to fungal growth Highly resistant to oils and chemicals Ideal for water immersion, such as swimming pools
International Intergard 740 is a two component epoxy finish coat suitable for brush, roller and spray application, suitable for use in a wide range of environments including offshore structures, petrochemical facilities, bridges, pulp and paper mills, and the power industry.
