Ardenbrite Metallic Paint (Water Based) is a beautiful and hardwearing water-borne metallic finish for interior and exterior use. The solvent-based finish with more gold, silver and bronze shades is available at Rawlins Paints, here.
Jotun Hardtop One
Jotun Hardtop One is a one component moisture curing acrylic polysiloxane resin based coating. The product does not contain isocyanates, neither does it generate di-isocyanates during hotwork / welding or fire accidents. It has excellent gloss and colour retention. It is a high solids product. The product is fully recoatable at any stage of curing.
Jotun Hardtop One is a one component moisture curing acrylic polysiloxane resin based coating. The product does not contain isocyanates, neither does it generate di-isocyanates during hotwork / welding or fire accidents. It has excellent gloss and colour retention. It is a high solids product. The product is fully recoatable at any stage of curing. Specially designed for application with brush and roller. The product has good application properties with low dry spray. To be used as topcoat in atmospheric environments.
Marine: Recommended for topside, deck and superstructure.
Protective: Recommended for offshore environments, refineries, power plants, bridges and buildings.
Approvals and Certificates
Pre-qualified in accordance with NORSOK M-501, Edition 6, System 1
Contributes to satisfying the following credit(s): Environmental Quality (EQ) and Materials and Resources (MR) under LEED® v4
Additional certificates and approvals may be available on request.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 7.2 - 12m² per litre
- Touch Dry
- 3 Hours
- Brush, Roller, Spray
Be the first to ask a question about this product!
A high performance single pack chlorinated rubber gloss finish with excellent chemical & water resistance. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Resistant to fungal growth Highly resistant to oils and chemicals Ideal for water immersion, such as swimming pools
Cromadex 440 One Pack Lower Odour Polyurethane Fine Texture Topcoat is a one pack lower odour topcoat that comes in a fine texture finish that adds value to your product. The product uses polyurethane technology providing excellent colour retention. The product has a long wet edge making it easier to apply to large items with no dry spray.
Nu-Steel Cladding Paint is a modified acrylic paint specifically developed for application for use on aluminium cladding, pre-fab buildings and industrial environments. Also ideal for Plastisol and polyester coated steel. Advantages Acrylic paint solution RAL shades. BS 4800 also available Excellent resistance to UV 12-month shelf life
Teamac Extra Brilliant Aluminium Paint is an all metal coating with thermal and photo reflective properties that can be used as a heat and light reflective protective finish on car wheels, hot water pipes, radiators, metal car components. It provides heat resistance up to 150°C.
Cromadex 635 Two Pack Polyurethane Leatherette Topcoat is a two pack polyurethane leatherette topcoat with excellent exterior durability and chemical resistance. The product exhibits excellent colour retention adding value to the finished article, whilst the leatherette effect can help differentiate your finish. Available in the full Cromadex range of...
International Interline 955 is a two component, heavy duty vinyl ester coating reinforced with glass flake to increase chemical and abrasion resistance. International Interline 955 is a chemically resistant, vinyl ester coating which can be applied using standard airless spray equipment at material temperatures up to 35°C (95°F).
International Interfine 878 is a high performance, two component, high solids finish which contains no free isocyanates, offers compliance to current VOC legislation, and affords extended lifetime to first maintenance when utilised as part of a high performance anticorrosive system.
A high performance two pack epoxy solvent-based micaceous iron oxide coating and finish for use as an intermediate build coat or finish on suitably primed steel and non-ferrous substrates. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004 Advantages Recoatable after long periods of exposure Conforms with parts KU1 C/D and KF 1 E/F...
Kem-Kromik 530 (formerly known as Sherwin-Williams C530 or as Leighs C530) is a high quality, quick drying, lead free single pack alkyd gloss finish for interior and exterior surfaces, ideally suited for equipment manufacturers and for structural steelwork. Kem-Kromik 530 possesses excellent gloss and colour retention and outstanding...
Cromadex 600 Two Pack Polyurethane Topcoat is a two pack polyurethane topcoat with excellent exterior durability and chemical resistance. The product exhibits excellent colour and gloss retention adding value to the finished article. The addition of Cromadex 600 Rapidcure Accelerator can speed up the drying time helping improve productivity in your factory.
Cromadex AQ40 One Pack Waterbased Air Drying Topcoat is a one pack water based air drying topcoat with excellent gloss and colour retention adding value to the finished article. Available in the full Cromadex range of colours and gloss levels, including BS, RAL and special matches all in a lead free finish. Life expectancy of up to 3 years in a C2...