Cromadex 234 One Pack Air Drying Alkyd Fine Texture Topcoat is a one pack air drying topcoat that comes in a fine texture finish that adds value to your product. The product has a long wet edge that enables a seamless finish on large articles without dry spray.
4,700+ colour options from RAL, BS and NCS including RAL Metallic and Cromadex Metallic Shades*
*Please note: Metallic colour swatches shown are for illustrative purposes only and may differ in appearance upon delivery due to the characteristics of metallic finishes
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cart
Cromadex 234 One Pack Air Drying Alkyd Fine Texture Topcoat is a one pack air drying topcoat that comes in a fine texture finish that adds value to your product. The product has a long wet edge that enables a seamless finish on large articles without dry spray.
Cromadex 234 One Pack Air Drying Alkyd Fine Texture Topcoat is available in the full Cromadex range of colours, including BS, RAL and special matches all in a lead free finish. Life expectancy of up to 3 years in a C2 (as determined in ISO12944) external environment when used with a suitable Cromadex primer. See Extra Life brochure for full details.
Suitable Substrates and Preparation
Mild Steel: Degrease with Cromadex 678 Spirit Wipe and abrade steel with P180. If necessary blast clean to remove millscale, minimum surface preparation SA2. Apply suitable Cromadex primer.
Aluminium & Galvanised Steel: Apply Cromadex 903 Chromate-Free Etch Primer (then other Cromadex primer is required to increase film build).
Stainless Steel: Use of Cromadex 903, AQ58, 750 or 850 primer is required.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3).
Please click here for important information about these kits.
Kit Contents:
SET 1 (Hand Tools)
1 x Rust-Oleum...
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
Colourmatch Service Disclaimer
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.