Carboline CARBO-KIT Carboxane 2000 Topcoat

CARB3679

Carboline CARBO-KIT Carboxane 2000 Topcoat is a two-component topcoat with excellent weathering properties.

  • Designed for brush and roller application for touch up and maintenance
  • High gloss surface
  • Often used where polyurethane coatings are not desired.
  • Excellent for use in chemical industry, offshore, ships, bridges, hydropower, and other heavy industry
  • Available in 400+ RAL and BS colour shades
  • 3 litre, gloss finish

Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.

**Available for delivery - see Delivery Options below**

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
Colour Group
£107.60
VAT excluded

£129.11 Tax incl.
Quantity

Description

Carboline CARBO-KIT Carboxane 2000 Topcoat is a two-component topcoat with excellent weathering properties.



Click To Jump To Section:




Features and Benefits


  • Designed for brush and roller application for touch up and maintenance
  • High gloss surface
  • Often used where polyurethane coatings are not desired.
  • Excellent for use in chemical industry, offshore, ships, bridges, hydropower, and other heavy industry
  • Available in 400+ RAL and BS colour shades
  • Gloss finish



Product Specification


Technical Data
Carboline CARBO-KIT Carboxane 2000 Topcoat
Volume Solids: 80 ± 2%
Theoretical Coverage Rate: 13.3 m²/l at 60 µm
8 m²/l at 100 µm
Allow for loss in mixing and application.
Dry Film Thickness: 75 – 125 µm per coat
Wet Film Thickness: 60 - 100 microns (2.36 - 3.94 mils) per coat
Dry Temperature Resistance: Continuous: 150°C (302°F)
Non-Continuous: 170°C (338°F)
Density: 1.18 g/cm³ depending on colour
Topcoats: Normally none, but can be overcoated with most polyurethanes and epoxies, or others as recommended.
Limitations: Not recommended for immersion service
Shelf Life: Part A: 24 months at 24°C
Part B: 24 months at 24°C
Storage Temperature and Humidity: 5° - 45°C
0 – 95% relative humidity



Drying Times


Curing Schedule
Surface Temp. Dry to Recoat Final Cure
2°C (36°F) 14 Hours 15 Days
10°C (50°F) 10 Hours 10 Days
15°C (59°F) 6 Hours 8 Days
25°C (77°F) 3 Hours 5 Days



  • These times are based on 75 µm DFT. Higher film thickness, insufficient ventilation or cooler temperatures will require longer cure times and could result in solvent entrapment and premature failure.



Surface Preparation


General

  • Surface must be clean and dry.
  • Employ adequate methods to remove dirt, dust, oil, and all other contaminants that could interfere with adhesion of the coating.

Steel

Application Methods


Product Information
Mixing: Power mix part A and part B separately, then combine and power mix.
Thinning: Normally not required.
May be thinned up to 15% with Carboline Thinner 10
Use of thinners other than those supplied or recommended by Carboline may adversely affect product performance and void product warranty, whether expressed or implied.
Ratio: 2:1 Ratio (A to B) by volume
Pot Life: 4 Hours at 23°C and less at higher temperatures.
Pot life ends when coating becomes too viscous to use. This product is moisture sensitive. Avoid moisture contamination.
Brush: Recommended using a medium bristle brush. Typical film thickness will be achieved in one coat.
Roller: Recommended using a short haired roller. Typical film thickness will be achieved in one coat.



Application Conditions


Product Conditions
Condition Material Surface Ambient Humidity
Minimum 5°C (41°F) 2°C (36°F) 2°C (36°F) 20%
Maximum 32°C (90°F) 50°C (122°F) 50°C (122°F) 85%



  • Industry standards are for substrate temperatures to be 3°C above the dew point.
  • Special application techniques may be required above or below normal application conditions.



Health and Safety


Clean Up

  • Use Thinner 2 or Acetone
  • In case of spillage, absorb and dispose of in accordance with local applicable regulations.

Safety

  • Read and follow all caution statements on this product data sheet and on the safety data sheet for this product.
  • Employ normal workmanlike safety precautions.
  • Hypersensitive persons should wear protective clothing, gloves and use protective cream on face, hands, and all exposed areas.

Ventilation

  • When used as a tank lining or in enclosed areas, thorough air circulation must be used during and after application until the coating is cured.
  • The ventilation system should be capable of preventing the solvent vapor concentration from reaching the lower explosion limit for the solvents used.

Caution

  • This product contains flammable solvents. Keep away from sparks and open flames.
  • All electrical equipment and installations should be made and grounded in accordance with the applicable local regulations.
  • In areas where explosion hazards exist, workmen should be required to use non-ferrous tools and wear conductive and non-sparking shoes.
  • Refer to the product and safety data sheet in the attachments section above for further details.
Product Details
CARB3679

Data sheet

Manufacturer
Carboline
For Use On
Steel
Application Method
Brush, Roller
Sheen
Gloss
Colour
Fully Tintable
Single, Two or Three Pack
Two-Pack
Pack Size
3L
Mixing Ratio
2:1 Ratio (A to B) by volume
Coverage
13.3 m²/l at 60 µm - 8 m²/l at 100 µm
Recommended Thinner/Cleaner
Carboline Thinner 2
Compatible Topcoats
Normally none, but can be overcoated with most polyurethanes and epoxies, or others as recommended.
Max. Application Temperature
Material: 32°C (90°F) - Surface: 50°C (122°F) - Ambient: 50°C (122°F) - Humidity: 85%
Min. Application Temperature
Material: 5°C (41°F) - Surface: 2°C (36°F) - Ambient: 2°C (36°F) - Humidity: 20%
Density
1.18 g/cm³ depending on colour
Solids by Volume
80 ± 2%
Shelf Life (from date of manufacture)
Part A: 24 months at 24°C - Part B: 24 months at 24°C
Recommended Dry Film Thickness
75 – 125 µm per coat.
Recommended Wet Film Thickness
60 - 100 microns (2.36 - 3.94 mils) per coat
UN Number
UN3469
Dry to Recoat (at 10°C)
10 Hours
Fully Cured (at 10°C)
10 Days
Pot Life
4 Hours at 23°C
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

Carboline Thinner 10

Carboline Thinner 10 is a thinner for use in industrial coatings. More Information **Available for delivery - see Delivery Options below**

Price £27.75
In stock

Carboline Thinner 2

Carboline Thinner 2 is a thinner for use in industrial coatings. More Information **Available for delivery - see Delivery Options below**

Price £27.38
In stock

Surface Preparation Kits for Steel

These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...

Price £25.53
In stock