Tor Torsan A Chlorinated Rubber Finish

    CR501
    TOR4099

    Tor Torsan “A” Chlorinated Rubber Finish, a quick-drying chemical resistant finish for use where high humidity rules out conventional paints, such as in swimming pools, breweries, factories, abattoirs, etc.

    • Chlorinated rubber binder pigmented with inorganic pigments and thinned with aromatic hydrocarbon solvent
    • The finish should only be applied to substrates which have been correctly prepared and primed with the appropriate chlorinated rubber primer.
    • Clean equipment with Tor TH19
    • Refer below for more product information, preparation and application instructions

    Colour
    Size
    Finish
    £89.72(ex. VAT)
    £107.66 (inc. VAT)
    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    Tor Torsan “A” Chlorinated Rubber Finish is a quick drying chemical resistant finish for use in swimming pools, breweries, factories, abattoirs, etc, where high humidity rules out conventional paints.

    The finish should only be applied to substrates which have been correctly prepared and primed with the appropriate chlorinated rubber primer.



    Features & Benefits


    • Chemical-resistant, chlorinated rubber finish
    • Quick-drying - touch dry in 1 hour, hard dry in 3 hours
      • See further below for drying times
    • Ideal for use in high humidity areas, such as:
      • Swimming pools
      • Factories
      • Abattoirs
      • Breweries
    • Good coverage up to 12.5 square metres per litre
    • Only comparatively thin films result from this product; therefore multi coats may be required for adequate protection or “high build” types considered.
    • Use with Tor TH25 for thinning when required
    • Clean equipment with Tor TH19
    • Dry film remains sensitive to solvents, oil and fats
    • Refer below for more product information, preparation and application instructions



    Product Information


    Chlorinated rubber binder pigmented with inorganic pigments and thinned with aromatic hydrocarbon solvent.

    Product referenceCR501
    Volume solids45%
    Typical thickness35 microns dft from 80 microns wet
    Theoretical coverage12.5 square metres per litre
    Practical coverage10 square metres per litre
    VOC contentEU limit value for this product (cat A/i): 500 g/l . This product contains max 500 g/l VOC



    Surface Preparation


    Torsan “A” Chlorinated Rubber Finish should only be applied to substrates which have been correctly prepared and primed with the appropriate chlorinated rubber primer.



    Application Details


    Mix ratioN/A
    Method of applicationBrush or airless spray (0.015" tip and 2500 psi atomising pressure)
    ThinnerTor TH25 (when required)
    CleanerTor TH19 for cleaning equipment
    Pot LifeN/A



    Drying Times


    Substrate TemperatureTouch DryHard DryOvercoating Interval
    MinimumMaximum
    20°C1 hour3 hours2-3 hoursUnlimited

    Note: Drying/curing times will be shortened by higher temperatures and lengthened by lower temperatures



    Storage and Handling


    Store in a safe place out of the reach of children

    Flash point

    • Above 32°C

    Shelf life

    • 2 years in unopened containers



    Limitations


    Dry film remains sensitive to solvents, oil and fats.

    Only comparatively thin films result from this product and therefore multi coats may be required for adequate protection or “high build” types considered.

    1. Avoid skin and eye contact i.e. wear gloves, goggles, etc
    2. Ensure good ventilation, mechanical if necessary
    3. Store and use away from heat and flame
    4. Do not eat or smoke in the vicinity of work
    5. Wash hands before eating
    6. Refer to supply container for additional warning labels

    Product Details
    4099-515332

    Data sheet

    Manufacturer
    Tor Coatings
    Water / Solvent Based
    Solvent
    For Use On
    Metal
    Application Method
    Brush, Spray
    Sheen
    Gloss
    Colour
    Standard / Ready Mixed
    Single, Two or Three Pack
    Single
    Pack Size
    5L
    Parts
    1
    Base Type
    Solvent
    Solvent
    Chlorinated rubber binder pigmented with inorganic pigments and thinned with aromatic hydrocarbon solvent.
    Mixing Ratio
    -
    Suitable Substrates
    substrates which have been correctly prepared and primed with the appropriate chlorinated rubber primer.
    Key Features
    For use where high humidity rules out conventional paints, such as in breweries, swimming pools, factories, abattoirs, etc.
    Application
    Brush, Spray
    Touch Dry (at 20°C)
    1 hour
    Dry to Recoat (at 20°C)
    2-3 hours
    Fully Cured (at 20°C)
    3 hours
    Pot Life (at 20°C)
    -
    Coverage
    12.5 square metres per litre
    Recommended Thinner/Cleaner
    Tor TH25 (thinner)/Tor TH19 (cleaner)
    Unit Contents
    -
    Compatible Primers
    Chlorinated rubber primer
    Compatible Topcoats
    -
    Max. Application Temperature
    -
    Min. Application Temperature
    -
    Density
    -
    Solids by Volume
    45%
    Heat Resistance (up-to)
    -
    VOC
    Product contains max 500 g/l VOC
    Shelf Life (from date of manufacture)
    2 years in unopened containers
    UN Number
    UN 1263
    Base Type
    Solvent-Based
    Suitable For Use On
    Metal
    Finish
    Gloss
    Application Method
    Brush
    Application Method
    Spray
    Product Usage Type
    Topcoat
    Colour Family
    White
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Tor Torsan A Chlorinated Rubber Finish is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    Tor QD Thinner

    Tor QD Thinner (TH19) is for the thinning (where necessary) of Tor Quick Drying Machinery Primers and Finishes and for the cleaning of the same materials from application equipment. Can also be used for degreasing metal components prior to painting. More Information Delivery Info

    Price £35.51 (ex. VAT)
    In Stock and Available for Delivery

    Tor HF Aromatic Thinners

    We no longer stock this product, but can recommend Tor QD Thinner as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option...

    In stock

    Surface Preparation Kits for Steel

    These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...

    Price £21.53 (ex. VAT)
    In Stock and Available for Delivery