Tor Tractor Enamel, available in over 1,500 colours, is ideal for farm machinery, tractors, vehicles, tools and implements. The general purpose gloss enamel has a high flash point and applies to bare steel and previously-painted surfaces by brush, roller or conventional sprayer.
1,500+ colours from RAL, BS, NCS & NCS 2050
Good coverage - up to 12.5 square metre per litre
Touch dry in 2-4 hours
Modified alkyd resin binder pigmented with inorganic/organic pigments and thinned with white spirit
Certain colours contain lead
Do not apply to surfaces likely to be chewed by animals
Product customisation
Don't forget to save your customization to be able to add to cart
Tor Tractor Enamel, a general purpose, gloss enamel with high flash for use on tractors and farm implements, available in over 1,500+ colours from RAL, BS, NCS & NCS 2050. The metal paint applies by brush, roller and conventional spray (after reducing) - please refer below to for information on applying to bare steel and previously-painted surfaces.
Features & Benefits
A high flash product (37°C)
General purpose gloss enamel
1,500+ colours from RAL, BS, NCS & NCS 2050
Ideal for use around farms on machinery, vehicles (tractors), tools and implements
Ensure good ventilation during application and drying
Certain colours may require two coats to ensure satisfactory opacity
Certain colours contain lead
Do not apply to surfaces likely to be chewed by animals
Product Information
Modified alkyd resin binder pigmented with inorganic/organic pigments and thinned with white spirit. Certain colours contain lead.
Product reference
AK485
Volume solids
47-52% (depending on colour)
Typical thickness
40 microns dft from 80 microns wet
Theoretical coverage
12.5 square metre per litre
Practical coverage
10 square metres per litre
VOC content
450g/L
Surface Preparation
Bare Steel -
Chip, scrap and wire brush to ST2 Swedish Standard and prime with Farm Oxide thinned with up to 15% Tor TH10 followed when dry by one or two coats of Tor Tractor Enamel.
Previously Painted -
All previously painted areas must be checked for adhesion of existing coatings. If unsound, remove and treat as bare. If sound one or two coats of Tor Tractor Enamel as required.
Application Details
Mix ratio
N/A
Method of application
Brush or short pile roller. By reducing with 15-20% Tor TH10 can be also applied by conventional spray
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Tor Tractor Enamel is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Tor General Purpose Thinner (TH10) - also known as Tor Tortread SP Thinners - is to be used for the thinning (where necessary) of general purpose primers, undercoats and finishes or for cleaning the same materials from brushes, rollers and trays immediately after application. More Information Delivery Info
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...