
HMG Thinner 2600
HMG Thinner 2600 is a very fast thinner. For use in recommended HMG systems. More Information Delivery Info
HMG Acrythane XSC21 (Base) is a premium quality, high solids 2K acrylic cured with isocyanate hardener with outstanding properties.
This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:
2-Pack System Details | |||
---|---|---|---|
Base (Part 1) | HMG Acrythane XSC21 | ||
Hardener (Part 2) | HMG Hardener 9044 |
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
HMG Acrythane XSC21 is a premium quality, high solids 2K acrylic cured with isocyanate hardener with outstanding properties.
Please note this product is one part of a two-pack system which MUST be purchased/used together with HMG Hardener 9044.
Not to be used in connection with 2004/42/CE
Can be used under Solvent Emissions Directive (SED) 1999/13/EC
For industrial use.
Technical Data | ||||
---|---|---|---|---|
Acrythane XSC21 Clearcoat | Acrythane XSC21 Colour | |||
Volume Solids: | 51.0% | 74.2% | ||
VOC Content: | 0.560kgs/ltr | 0.560kgs/ltr | ||
SG: | - | - | ||
Viscosity: | 350 mPas | 300 mPas | ||
Density: | 1.02 g/cm³ | 1.485 g/cm³ | ||
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | ||
Shelf Life: | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. | ||
Pot Life: | 1 - 2 hours @ 20°C | 1 - 2 hours @ 20°C | ||
Flash Point: | 25°C | 24°C |
Product Data | |||
---|---|---|---|
Dry Film Thickness | Wet Film Thickness | ||
Pressure Pot: | 40 μm | 80 μm | |
Compliant Spray Gun: | 40 μm | 80 μm |
Coverage: 11 square metres per litre @ 40 microns dft (theoretical)
Drying Times At 20°C | |
---|---|
Touch Dry: | 60 - 90 minutes |
Dry To Handle: | 8 hours |
Dry To Recoat: | After through curing (8 hours @ 20°C / 30 minutes @ 70°C), denib with P500g dry. After baking allow to cool before flatting & recoating. |
Fully Cured: | 5 - 7 days |
Technical Data | |||||
---|---|---|---|---|---|
Compliant Spray Gun | Pressure Pot | ||||
Mixing Ratio: | Base: 2 | Base: 2 | |||
Hardener: 1 | Hardener: 1 | ||||
Thinner: 0.5 | Thinner: 0.5 | ||||
Hardener Options: | Hardener 9044 | Hardener 9044 | |||
Thinner Options: | Thinner 2600 | Thinner 2600 | |||
Thinner 2601 | Thinner 2601 | ||||
Thinner 2602 | Thinner 2602 | ||||
Thinner 2603 | Thinner 2603 | ||||
Thinner 2604 | Thinner 2604 | ||||
Viscosity: | 21 - 26 seconds B4 cup | 21 - 26 seconds B4 cup | |||
Spray Gun Setup: | 1.1 - 1.4 | 1.6 - 1.8 | |||
Number Of Coats (Guide Only): | 1 medium + 1 full | 1 medium + 1 full | |||
Flash Off: | 10 - 15 minutes | 10 - 15 minutes |
For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]
Information on basic physical and chemical properties | ||||
---|---|---|---|---|
Acrythane XSC21 Clearcoat | Acrythane XSC21 Colour | |||
Form: | Liquid | Liquid | ||
Colour: | According to product specification | According to product specification | ||
Odour: | Characteristic | Characteristic | ||
Odour Threshold: | Not determined | Not determined | ||
pH-value 20°C: | Not determined | Not determined | ||
Melting point/freezing point: | Undetermined | Undetermined | ||
Initial boiling point and boiling range: | 126°C | 124°C | ||
Flash Point: | 25°C | 24°C | ||
Flammability (solid, gas): | Not applicable | Not applicable | ||
Ignition temperature: | 315°C | 415°C | ||
Decomposition temperature: | Not determined. | Not determined. | ||
Auto-ignition temperature: | Product is not selfigniting | Product is not selfigniting | ||
Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | ||
Explosion limits: Lower: | 3.0 Vol% | 1.2 Vol% | ||
Explosion limits: Upper: | 10.4 Vol% | 7.5 Vol% | ||
Vapour pressure at 20°C: | 10.7 hPa | 11.2 hPa | ||
Density at 20°C: | 1.02 g/cm³ | 1.485 g/cm³ | ||
Relative density: | Not determined | Not determined | ||
Vapour density: | Not determined | Not determined | ||
Evaporation rate: | Not determined | Not determined | ||
Solubility in / Miscibility with water: | NOT MISCIBLE | NOT MISCIBLE | ||
Partition coefficient: n-octanol/water: | Not determined | Not determined | ||
Viscosity: Dynamic at 20°C: | 350 mPas | 300 mPas | ||
Viscosity: Kinematic: | Not determined | Not determined | ||
Solvent content: Organic solvents: | 43.5% | 25.6% | ||
Solids content: | 51.0% | 74.2% |
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
HMG Acrythane XSC21 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG Thinner 2600 is a very fast thinner. For use in recommended HMG systems. More Information Delivery Info
HMG Thinner 2601 is a very fast thinner. For use in recommended HMG systems. More Information Delivery Info
HMG Thinner 2602 is a medium slow thinner. For use with compatible HMG systems. More Information Delivery Info
HMG Thinner 2603 is a medium slow thinner. For use with compatible HMG systems. More Information Delivery Info
HMG Thinner 2604 is a slow thinner. For use with compatible HMG systems. More Information Delivery Info
HMG 2K Accelerator is a hardener designed to speed up drying times. For use with HMG Acrythane systems. More Information Delivery Info
HMG Hardener 9044 is a medium solids isocyanate hardener. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) Option 1: HMG Acrythane XSC21 Option 2: HMG Acrythane XSC21 Clear Activator (Part 2) HMG Hardener 9044...
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...