HMG Acrythane SC601 Colours

    TOPSC601
    HMG4404

    HMG Acrythane SC601 Colours (Base) is a standard high solids 2K acrylic cured with isocyanate hardener with outstanding properties.

    This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:

    2-Pack System Details
    Base (Part 1)HMG Acrythane SC601 Colours
    Activator (Part 2)Option 1: HMG Hardener 9004 Standard
    Option 2: HMG Hardener 9027 Wintermix

    • Part one of a two part system.
    • Rapid drying
    • High gloss
    • Simplicity of use
    • Excellent protection against harsh weather conditions and atmospheric pollution
    • Available in 3,500 colours from RAL, NCS, and British Standard

    Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.

    Product customisation

    Don't forget to save your customization to be able to add to cart
    • 250 char. max
      Your customization:
    Colour Group
    Size
    Finish
    £30.90(ex. VAT)
    £37.08 (inc. VAT)
    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    HMG Acrythane SC601 Colours is a standard high solids 2K acrylic cured with isocyanate hardener with outstanding properties.

    Please note this product is one part of a two-pack system which MUST be purchased/used together with HMG Hardener 9004 Standard or HMG Hardener 9027 Wintermix.



    Click To Jump To Section:




    Features & Benefits


    • Available in 3,500 colours from RAL, NCS, and British Standard
    • Rapid drying
    • High gloss
    • Simplicity of use
    • Excellent protection against harsh weather conditions and atmospheric pollution.



    Product Specification


    Technical Data
    Volume Solids:55.4%
    VOC Content:0.5kgs/ltr
    SG:-
    Viscosity:350 mPas
    Density:1.021 g/cm³
    Storage Conditions:Store between 5°C - 25°C. When not in use, cans must be kept sealed.
    Shelf Life:12 months from delivery date in original sealed containers.
    Pot Life:1 - 2 hours at 20°C
    Flash Point:23°C



    Film Thickness Range And Coverage


    Product Data
     Dry Film ThicknessWet Film Thickness
    Pressure Pot:40 μm80 μm
    Compliant Spray Gun:40 μm80 μm



    Coverage: 11 square metres per litre at 25 microns dft mixed (Theoretical).

    • HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
    • These values are a guide only and are not to be used as specifications.
    • Film thickness will vary depending on actual use and specification.
    • Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.



    Drying Times


    Drying Times At 20°C
    Touch Dry:30 minutes
    Dry To Handle:6 - 8 hours
    Dry To Recoat:After through curing (8 hours at20°C / 30 minutes at 70°C) denib with p500g dry. After baking allow to cool before flatting and recoating.
    Fully Cured:5 - 7 days



    Surface Preparation


    • Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
    • Read and follow the safety data sheet, product data sheet and label instructions.
    • Stir all paints thoroughly before use.
    • Always use the same batch number on the same job.
    • Check colour & sheen.
    • Filter the product immediately before use.
    • Reduce emissions and maintain quality by replacing tin lid after use.



    Application Methods


    Technical Data
    Compliant Spray GunPressure Pot
    Mixing Ratio:Base: 2Base: 2
    Hardener: 1Hardener: 1
    Thinner: 0.5Thinner: 0.5
    Hardener Options:Hardener 9004 StandardHardener 9004 Standard
    Hardener 9027 WintermixHardener 9027 Wintermix
    Thinner Options:Thinner 2600Thinner 2600
    Thinner 2601Thinner 2601
    Thinner 2602Thinner 2602
    Thinner 2603Thinner 2603
    Thinner 2604Thinner 2604
    Viscosity:21 - 26 seconds B4 cup21 - 26 seconds B4 cup
    Spray Gun Setup:1.6 - 1.81.1 - 1.4
    Number Of Coats (Guide Only):1 medium + 1 full1 medium + 1 full
    Flash Off:--



    For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]



    Product Notes


    Information on basic physical and chemical properties
    Form:Liquid
    Colour:According to product specification
    Odour:Characteristic
    Odour Threshold:Not determined
    pH-value 20°C:Not determined
    Change in Condition
    Melting point/freezing point:Undetermined
    Initial boiling point and boiling range:124°C
    Flash Point:24°C
    Flammability (solid, gas):Not applicable
    Ignition temperature:315°C
    Decomposition temperature:Not determined
    Auto-ignition temperature:Product is not selfigniting
    Explosive properties:"Product is not explosive. However, formation of explosive air vapour mixtures are possible."
    Explosion limits: Lower:1.2 Vol %
    Explosion limits: Upper:10.8 Vol %
    Vapour pressure at 20°C:11.2 hPa
    Density at 20°C:1.021 g/cm³
    Relative density:Not determined
    Vapour density:Not determined
    Evaporation rate:Not determined
    Solubility in / Miscibility with water:NOT MISCIBLE
    Partition coefficient: n-octanol/water:Not determined
    Viscosity: Dynamic at 20°C:350 mPas
    Viscosity: Kinematic:Not determined
    Solvent content: Organic solvents:44.6%
    Solids content:55.4%



    Health & Safety


    • Refer to the safety data sheet in the attachments section above and tin label prior to use.
    • Ready for use product contains isocyanates. Suitable air fed respiratory equipment should be worn when spraying.

    Click to go back to the top of the page

    Product Details
    4404-829895

    Data sheet

    Manufacturer
    HMG Paints Limited
    For Use On
    Metal
    Application Method
    Spray
    Sheen
    Matt
    Satin
    Gloss
    Semi-Gloss
    Colour
    Fully Tintable
    VOC Levels
    Ultra-Low (5-49 g/l)
    Single, Two or Three Pack
    Two-Pack
    Pack Size
    1L
    5L
    Mixing Ratio
    Base: 2 - Hardener: 1 - Thinner: 0.5
    Application
    Spray
    Touch Dry (at 20°C)
    30 Mins
    Dry to Handle (at 20°C)
    6 - 8 Hours
    Dry to Recoat (at 20°C)
    After through curing (8hrs@20C / 30mins@70C) denib with p500g dry. After baking allow to cool before flatting and recoating.
    Fully Cured (at 20°C)
    5 - 7 Days
    Pot Life (at 20°C)
    1 - 2 Hours
    Coverage
    11 square metres per litre @ 25 microns dft mixed
    Recommended Thinner/Cleaner
    Thinner 2600/2601/2602/2603/2604
    Compatible Topcoats
    Polykote 2K AMC4 Primer, Polykote 2K MPS 4+1 Primer, Polykote HS Rapidbuild 2K Primer
    Density
    1.021 g/cm³
    Solids by Volume
    55.4 %
    Finish
    Matt
    Satin
    Gloss
    Size
    1L and 5L
    Recommended Dry Film Thickness
    40 μm
    Recommended Wet Film Thickness
    80 μm
    UN Number
    1263
    Base Type
    Solvent-Based
    Suitable For Use On
    Primed Surfaces
    Finish
    Matt
    Finish
    High Gloss
    Finish
    Satin
    Application Method
    Spray
    Usages
    High Solids
    Usages
    Weather Resistance
    Usages
    Atmospheric
    Usages
    Atmospheric Polution Resistance
    Product Usage Type
    Topcoat
    Product Range
    Acrythane
    Colour Family
    Brown
    Colour Family
    Metallic
    Colour Family
    Orange
    Colour Family
    Beige
    Colour Family
    Yellow
    Colour Family
    Green
    Colour Family
    Clear
    Colour Family
    Red
    Colour Family
    Neutral
    Colour Family
    Pink
    Colour Family
    Stone
    Colour Family
    Anthracite Grey
    Colour Family
    Purple
    Colour Family
    Grey
    Colour Family
    Black
    Colour Family
    Blue
    Colour Family
    White
    Product Type
    Polyurethane
    Environment
    Atmospheric
    Touch Dry/Dust Free (@ 20-25°C)
    30 mins
    Resistance to
    Weather
    Resistance to
    Atmospheric Polution
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    questions Mark on 2022-06-20 10:42:43
    Question: 

    Can you supply the mixing details for SC601 in percentage weights? Your details are unclear as volume and weight ratios can be vastly different. Thank you Mark

    Answer from Rawlins’ Technical Team: 

    HMG only supply the mixing ratios by volume. 


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    HMG Acrythane SC601 Colours is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    HMG Thinner 2600

    HMG Thinner 2600 is a very fast thinner.For use in recommended HMG systems.More Information Delivery Info

    Price £36.01 (ex. VAT)
    In Stock and Available for Delivery

    HMG Thinner 2601

    HMG Thinner 2601 is a very fast thinner.For use in recommended HMG systems.More Information Delivery Info

    Price £10.25 (ex. VAT)
    In Stock and Available for Delivery

    HMG Thinner 2602

    HMG Thinner 2602 is a medium slow thinner.For use with compatible HMG systems.More Information Delivery Info

    Price £10.65 (ex. VAT)
    In Stock and Available for Delivery

    HMG Thinner 2603

    HMG Thinner 2603 is a medium slow thinner.For use with compatible HMG systems.More Information Delivery Info

    Price £36.01 (ex. VAT)
    In Stock and Available for Delivery

    HMG Thinner 2604

    HMG Thinner 2604 is a slow thinner.For use with compatible HMG systems.More Information Delivery Info

    Price £10.65 (ex. VAT)
    In Stock and Available for Delivery

    HMG 2K Accelerator

    HMG 2K Accelerator is a hardener designed to speed up drying times.For use with HMG Acrythane systems.More Information Delivery Info

    Price £31.48 (ex. VAT)
    In Stock and Available for Delivery

    HMG Hardener 9027 Wintermix

    HMG Hardener 9027 Wintermix is a fast curing, medium solids isocyanate hardener. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:2-Pack System DetailsBase (Part 1) Option 1: HMG Acrythane SC601 ColoursOption 2: HMG Polykote 2K AMC PrimerOption 3: HMG...

    Price £24.71 (ex. VAT)
    In Stock and Available for Delivery

    HMG Hardener 9004 Standard

    HMG Hardener 9004 Standard is a medium solids isocyanate hardener. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:2-Pack System DetailsBase (Part 1) HMG Acrythane SC601 ColoursHMG Acrythane 102HMG 2K Multi Surface TopcoatHMG Polykote 2K AMC Primer...

    Price £24.71 (ex. VAT)
    In Stock and Available for Delivery

    Surface Preparation Kits for Steel

    These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...

    Price £21.53 (ex. VAT)
    In Stock and Available for Delivery