Rust-Oleum 9600 Rust-O-Thane Polyurethane is a solvent based, flexible polyurethane topcoat leaving a high gloss finish. Resistant to ponding water, UV and chemicals Rust-Oleum 9600 Rust-O-Thane Polyurethane is available in almost any colour and does not fade. Ideal for gutters, pipes, exterior metal (fences, railings, etc.), floors and other...
Rust-Oleum 9996 Rust-O-Thane Accelerator
Rust-Oleum 9996 Rust-O-Thane Accelerator
Rust-Oleum 9996 Rust-O-Thane Accelerator is a special additive to reduce the drying time of the Rust-Oleum 9600 Rust-O-Thane Polyurethane.
- Accelerator for Rust-Oleum 9600 Rust-O-Thane Polyurethane
- Shortens the drying time by several hours.
- Minimal influence on pot-life and other properties
quantities of 3 - 5%.
Drying times at 20°C/50% RH
To touch: 6 hours
To handle: 12 hours
To recoat: After 8 hours, within 72 hours
Full hardness 7 days
With 4 - 5% accelerator:
To touch: 2 hours
To handle 3 hours
To recoat: After 4 hours, within 48 hours
Full hardness 5 days
Directions for use
Stir individual components of the 9900 or 9600 thoroughly before mixing them together. Use the boxing method or a low speed mixer. Add the activator 9996 after the 2 components are thoroughly mixed.
Pot life will be reduced when using the accelerator from 4 to 2 hours for 9600 and from 2 to 1 hour for 9900. Using the accelerator may reduce slightly less gloss development in some colours and a minor reduction in film hardness. All other performances of the coating are not effected. Exceeding amount of accelerator will not significantly reduce drying time and can influence characteristics of the coating.
Shelf life/storage conditions
5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Shelf Life (from date of manufacture)
- Base 2 years and activator 1 year from the date of production in unopened cans, if stored in dry, well-ventilated and frost-free areas, not in direct sunlight at temperatures between 5° and 35° C. Opened activator cans must be used within 1 week.
- UN Number
- 1263 LQ
Be the first to ask a question about this product!
Cromadex 891 High Solids Two Pack Acrylic Topcoat is a high solids two pack acrylic topcoat with excellent exterior durability. The product has excellent UV resistance giving it prolonged decorative performance. The product is high in solids enabling it to be used as part of a VOC reduction programme. Available in a wide range of colours and gloss levels,...
Bradite HD Floor + Wall is a heavy-duty coating for walls and floors that is well-suited to factory and industrial environments that need ultra protection and an easy-to-clean surface. Also suitable for hygene-sensitive areas such as hospitals and more. Advantages Available in more than 350 colours in RAL & BS Water-based epoxy...
Cromadex 442 One Pack Lower Odour Polyurethane Medium Texture Topcoat is a one pack lower odour topcoat that comes in a medium texture finish that adds value to your product. The product uses polyurethane technology providing excellent colour retention. The product has a long wet edge making it easier to apply to large items with no dry spray.
Cromadex 742 Two Pack Epoxy Medium Texture Topcoat is a two pack epoxy medium texture topcoat with excellent chemical resistance for interior use only. The product offers a medium texture appearance for an aesthetic finish. The product can be air dried or stoved enabling flexibility in production. Available in a wide range of colours and gloss...
Sika Permacor 2707 is a 2-pack epoxy resin topcoat with high mechanical resistance and with excellent chemical resistance to aqueous and alkaline exposure. It is used as a top coat for metal surfaces exposed to extreme interior environments, e.g. for highly exposed structures, pipe work, cladding panels, railings, machines and other...
HMG Grathane Rapid is a fast drying 2K water based isocyanate-cured polyurethane coating. Excellent durability Chemical resistance Anti-graffiti properties. Available in a wide colour range including RAL & BS shades Click to jump down to Technical Data
Bradite Chlorinated Rubber is a high performance single pack chlorinated rubber gloss finish with excellent chemical & water resistance. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Available in over 350+ colours in RAL and BS Choose from gloss and eggshell finishes Resistant to fungal growth Highly...
PPG SigmaCover 522 is a two-component, micaceous iron oxide-pigmented, polyamide-cured epoxy primer/sealer/coating. It has excellent adhesion to, and sealing of, weathered, cleaned, zinc-rich primers and metal-sprayed steel, with good adhesion to properly pre-treated galvanized steel. Can be used in systems for atmospheric or water-immersed...
Sherwin-Williams Macropoxy M330 (formerly known as Epigrip M330) is a 2-pack epoxy sealercoat for use over zinc silicate and other types of zinc rich primers. It is also used as a blast primer for use over stainless steel.
Jotun Hardtop Pro is a low VOC, high volume solids, isocyanate free, economical polysiloxane topcoat for offshore structures, tank farms, refineries, power plants, bridges and buildings. It has very good colour and gloss retention and has very good resistance to abrasion and chemicals.
International Interseal 121 is a single component, spray applied, high build, water based coating for direct application over coated substrates and non-ferrous substrates which dries to form a non-tacky, tough, resilient temporary protective layer.
A durable and high performance acrylic coating for use where excellent weathering properties and chemical resistance are required. Use as a direct-to-metal acrylic coating for structural steel, as well as other exterior and interior uses. Top Features Smooth, attractive, high build finish Excellent corrosion protection Meets most VOC...
Cromadex V60 Two Pack Rail Topcoat is a two pack polyurethane topcoat formulated for refurbishment programmes in the rail industry. When used as a system with Cromadex V39 Rail Primer (Refurbishment) it meets the following specifications: BS 6853 1999 Annex B, BS 476 Part 6 : 1989 Class 0, BS 476 Part 7 : 1997 Class 1.
SikaCor EG 5 is a two-pack topcoat based on polyurethane with good gloss and colour retention. By adding 1% b.w. of SikaCor PUR Accelerator (see product data sheet for more information) a faster touch-drying and full curing will be achieved. Features and Benefits Combined with 2-pack epoxy primer and intermediate coats: Very good...
Tor Quick Drying Machinery Enamel finishes factory machinery, tools, agricultural implements, etc, applying by airless spray. Available in over 400 colours from RAL and BS. Quick drying Touch dry in 30 minutes Hard dry after 2 hours An alkyd resin binder pigmented with inorganic pigments and thinned with xylene Use with a suitable...