Tikkurila Fontelac QD 80 is a water-borne, one-component glossy topcoat based on alkyd dispersion ideal for touch-up painting in indoor areas. Used as a glossy finish for small tanks, agricultural machinery, haulage equipment and other machinery and equipment.
Easy to use - one-component
Ideal for touch-up painting in indoor areas
Wide range of colours
Good gloss and colour retention
Low VOC
Product customisation
Don't forget to save your customization to be able to add to cart
Tikkurila Fontelac QD 80 is a water-borne, one-component glossy topcoat based on alkyd dispersion, that is easy to use and ideal for touch-up painting in indoor areas.
Fontelac QD 80 is available in a wide range of colours. The product is used as a glossy finish for small tanks, agricultural machinery, haulage equipment and other machinery and equipment. It forms a tough and durable surface with good gloss and colour retention.
All surfaces must be clean, dry and free from contamination.
The temperature of the ambient air, surface and paint should not fall below +10ºC during application and drying.
Relative humidity of the air should not exceed 70% during application and drying.
The surface temperature of steel should remain at least 3°C above the dew point.
Good ventilation and sufficient air movement is required in confined areas during application and drying.
Application
Stir the product carefully before use.
For airless spraying, the product is thinned approximately 0–5%.
Recommended nozzle tip is 0.011"–0.013" and pressure 120–180 bar.
Spray angle shall be chosen according to the shape of the object.
For dip coating, the product is thinned approximately 0–15% to viscosity 20–25s (DIN4).
For brush application the product should be thinned according to the circumstances.
Thinner/Cleaning
Thinner
Water.
Cleaning Of Equipment
Clean the spraying equipment immediately after use as follows:
Run the equipment with water to remove excess paint.
Run the equipment with a mixture of approx 20% Thinner 1109 in clean water, at least two times.
Finally wash with undiluted Thinner 1109.
Wash the equipment with water before starting to paint again. Unwashed equipment can cause serious surface defects.
VOC
The Volatile Organic Compounds amount is 80g/litre of paint.
VOC content of the paint (thinned 15% by volume) is 70 g/litre.
Health And Safety
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets.
For industrial and professional use only.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Tikkurila Fontelac QD 80 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Tikkurila Fontecryl AP is a water-borne, one-component fast-drying acrylic based primer for various surfaces containing active anti-corrosive pigments.Provides excellent adhesion Used as an anti-corrosive primer on steel, aluminium and zinc surfaces Suitable for dipping Can be overcoated both with water and solvent-borne topcoats Wide...
Tikkurila Fontefloor EP 100 is a two-component water-borne epoxy paint for painting of new, old and earlier painted concrete surfaces, including walls and floors exposed to moderate chemical and mechanical stress in industrial facilities, warehouses, repair shops etc.Huge colour range available from RAL, BS & NCS Also used in...
Tikkurila Temaprime EE is a fast drying, one-component anti-corrosive special primer. Its recommended uses include both new and maintenance painting of containers, agricultural machinery and other steel structures.Huge colour range available. Adheres extremely well to different kinds of substrates, such as steel, aluminium and zinc....
Tikkurila Temaprime EUR is a fast-drying, one-component anti-corrosive economical alkyd primer. Recommended for steel structures, agricultural, construction and other machinery.Huge colour range available. An excellent choice for use in assembling plants and painting stations with rapid production cycles. The product has MED (Marine...
Tikkurila Temaprime GF is a fast-drying one-component anti-corrosive pigmented special primer. Recommended uses include haulage equipment, agricultural, construction and other machinery.Huge colour range available Primer for steel, aluminium and zinc surfaces Recoatable also with polyurethane paints Excellent anti-corrosive properties...
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...