Tikkurila Temadur 50 is a two-component, durable and non-chalking semi-gloss polyurethane paint, hardener aliphatic isocyanate. A time-proven, easy-to-use general purpose topcoat for constructional steelwork and machinery, with a wide range of colours to choose from.

Approved for use on top of intumescent coatings, Temadur 50 has excellent weathering and abrasion resistance and is used as a semi-gloss topcoat for epoxy and polyurethane systems exposed to weathering and/or chemical stress.

The product has MED (Marine Equipment Directive) certificate no EUFI29-19002495-MED and is thus accepted for painting surfaces inside of ships.

Please note available colour and size combinations:

• 1lt White
• 3lt White
• 10lt White
• 20lt White
• 1lt Full RAL & BS Colour Range - Except Metallic & Fluorescent Shades
• 3lt Full RAL & BS Colour Range - Except Metallic & Fluorescent Shades
• 10lt Full RAL & BS Colour Range - Excluding Fluorescent but INCLUDING Metallic Shades

MED-Approved Product

Accepted for painting surfaces inside of ships with MED (Marine Equipment Directive) certificate no VTT-C-11979-15-17. MED approved products can be used for painting of interior furniture and other surfaces on board ships.

Materials used for interior decoration on board cruise ships must fulfil the fire safety requirements of the UN agency IMO (International Maritime Organization). If the ship sails under an EU flag, the product must be MED approved in accordance with the EU Marine Equipment Directive. At the same time, the quality system of the supplying company is regularly audited by an exterior quality system auditor.

For paint products, this means that the product has been flame spread tested, and the toxicity of its smoke and combustion gases has been assessed. The products that have passed the test have a low flame spread and do not emit toxic smoke or combustion gases.

For more information, contact our technical team on 0113 2455450 (option 2) or send a message to [email protected].

For industrial and professional use only.

Quick Links - Click To Jump To Section:

• Features & Benefits
• Technical Data
• Surface Preparation
• Recommended Primers
• Recommended Topcoats
• Application Conditions
• Mixing Components
• Application
• Thinners
• Cleaners

Features & Benefits

• A time-proven, easy-to-use general purpose topcoat for constructional steelwork and machinery
• The paint has a wide spectrum of colors, including metallic effects
• Forms a durable, easy-to-clean and non-chalking topcoat with good gloss and colour retention
• The paint has also been approved for use on top of intumescent coatings
• The product has MED (Marine Equipment Directive) certificate no EUFI29-19002495-MED and is thus accepted for painting surfaces inside the ships
• Excellent weathering and abrasion resistance
• To be used as a semi-gloss topcoat for epoxy and polyurethane systems exposed to weathering and/or chemical stress
• Recommended for, but not limited to:
• Transport and haulage equipment
• Storage tank exteriors
• Steel framework and other steel structures
• Machinery and equipment

Technical Data

• Volume Solids: 56±2% (ISO 3233)
• Weight Solids: 70±2%
• Specific Gravity: 1.3±0.1 kg / l (mixed)
• Pot Life (23℃): 4 hours
• VOC:
• The Volatile Organic Compounds amount is 420 g/litre of paint mixture.
• VOC content of the paint mixture (thinned 23% by volume) is 495 g/l.
• Mixing Ratio:
• Base: 5 parts by volume (Temadur 50)
• Hardener: 1 parts by volume (008 7590)

Recommended Film Thicknesses and Theoretical Coverage

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Drying Times

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.

Surface Preparation

Primed surfaces:

• Oil, grease, salt and dirt are removed from the surface by appropriate means.
• Repair any damage to the primer coat.
• Note the overcoating time of primer. (ISO 12944-4)

Recommended Primers

• Temacoat GPL-S Primer
• Temacoat GPL-S MIO
• Temacoat Primer
• Temacoat SPA Primer
• Temacoat SPA 50
• Temacoat RM 40
• Temabond ST 200
• Temabond ST 300
• Fontecoat EP 50
• Temadur 20

Recommended Topcoats

• Temathane PC 80
• Temadur 50
• Temadur 90
• Temadur Clear
• Temathane 90
• Temathane PC 50

Application Conditions

• All surfaces must be clean, dry and free from contamination.
• The temperature of the ambient air, surface and paint should not fall below 5℃ during application and drying.
• Relative humidity of the air should not exceed 80% during application and drying.
• The surface temperature of steel should remain at least 3°C above the dew point.
• Good ventilation and sufficient air movement is required in confined areas during application and drying.

Mixing Components

• First stir base and hardener separately
• The correct proportions of base and hardener must be mixed thoroughly before use
• Use power mixer for mixing
• Insufficient mixing or incorrect mixing ratio will result in uneven drying of the surface and weaken the properties of the coating.

Application

• In order to obtain an even, non-porous finish at airless spraying the viscosity should be 30–60 s DIN4.

• For airless spraying, the product is thinned depending on the temperature of the components (base, hardener, thinner) and the required viscosity the paint approximately 10–23%
• Recommended nozzle tip is 0.011"–0.017" and pressure 120–160 bar
• Spray angle shall be chosen according to the shape of the object

• For conventional spraying, the product is thinned depending on the temperature of the components (base, hardener, thinner) and the required viscosity the paint approximately 10–23%
• Recommended nozzle tip is 1.4–1.8 mm and pressure 3–4 bar

• For brush application product should be thinned according to the circumstances

Thinners

• Thinner 1048
• Thinner 1067
• Thinner 1061
• Thinner 1061 (fast) is also suitable for conventional spraying

Cleaners

• Thinner 1048
• 1067
• 1061