Tikkurila Temadur 90, 2-pack, high gloss polyurethane paint recommended to be used as a glossy decorative finishing coat for epoxy systems on a variety of substrates such as steel, aluminium, concrete etc. exposed to severe weathering and/or chemical stress.
Forms a durable, easy-to-clean and non-chalking topcoat with outstanding gloss and colour retention.
Huge colour range available from RAL, BS & NCS
Please note available colour and size combinations in long description
Outstanding resistance to weathering and abrasion
Ideal for original equipment manufacturing, such as agricultural machinery and haulage equipment
Due to CE marking can also be used on top of coating systems used for concrete surfaces.
Product customisation
Don't forget to save your customization to be able to add to cart
Tikkurila Temadur 90 is a two-component, high gloss polyurethane paint, hardener aliphatic isocyanate that forms a durable, easy-to-clean and non-chalking topcoat with outstanding gloss and colour retention. Its outstanding resistance to weathering and abrasion makes the product a very good solution for original equipment manufacturing, such as agricultural machinery and haulage equipment, and is recommended to be used as a glossy decorative finishing coat for epoxy systems on a variety of substrates such as steel, aluminium, concrete etc. exposed to severe weathering and/or chemical stress.
Huge colour range available from RAL, BS & NCS
Please note available colour and size combinations:
1lt White
3lt White
10lt White
1lt Full RAL, BS & NCS Colour Range - Excluding Fluorescent but INCLUDING Metallic Shades
3lt Full RAL, BS & NCS Colour Range - Except Metallic & Fluorescent Shades
10lt Full AL, BS & NCS Colour Range - Excluding Fluorescent but INCLUDING Metallic Shades
20lt Full RAL, BS & NCS Colour Range - Except Metallic & Fluorescent Shades
Forms a durable, easy-to-clean and non-chalking topcoat with outstanding gloss and colour retention.
The paint has an almost unlimited range of colors, including metallic effects
Outstanding resistance to weathering and abrasion makes the product a very good solution for original equipment manufacturing, such as agricultural machinery and haulage equipment
With special hardener Temadur 90 can be used for interior wooden surfaces, e.g. metallic shades kitchen doors
Recommended to be used as a glossy decorative finishing coat for epoxy systems on a variety of substrates such as steel, aluminium, concrete etc. exposed to severe weathering and/or chemical stress
Due to CE marking can also be used on top of coating systems used for concrete surfaces.
Hardener 008 7594 is recommended to be used in hot and humid conditions
The product has been tested for non-contamination of grain cargo at the Newcastle Occupational Health & Hygiene, Great Britain
Recommended for, but not limited to:
Transport and haulage equipment
Storage tank exteriors
Steel framework and other steel structures
Machinery and equipment
Technical Data
Volume Solids: 55±2% (ISO 3233)
Weight Solids: 68±2%
Specific Gravity: 1.2±0.1 kg / l (mixed)
Pot Life (23℃): 4 hours
VOC:
The Volatile Organic Compounds amount is 420 g/litre of paint mixture.
VOC content of the paint mixture (thinned 22% by volume) is 495 g/l.
Mixing Ratio:
Base: 5 parts by volume (Temadur 90)
Hardener: 1 parts by volume (008 7590 or 008 7594)
Recommended Film Thicknesses and Theoretical Coverage
Recommended film thicknesses
Theoretical coverage
Wet
Dry
75µm
40µm
13.7 m²/l
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Drying Times
DFT 40 µm
5°C
10°C
23°C
35°C
Dust dry, after
45min
30min
20min
10min
Touch dry, after
12h
8h
4h
2½h
Recoatable, min. after
No limitations
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Surface Preparation
Primed surfaces:
Oil, grease, salt and dirt are removed from the surface by appropriate means.
Repair any damage to the primer coat.
Note the overcoating time of primer. (ISO 12944-4)
Concrete surfaces:
See the respective data sheets of concrete systems.
All surfaces must be clean, dry and free from contamination.
The temperature of the ambient air, surface and paint should not fall below 5℃ during application and drying.
Relative humidity of the air should not exceed 80% during application and drying.
The surface temperature of steel should remain at least 3°C above the dew point.
Good ventilation and sufficient air movement is required in confined areas during application and drying.
Concrete surfaces:
See the respective data sheets of concrete systems.
Mixing Components
First stir base and hardener separately
The correct proportions of base and hardener must be mixed thoroughly before use
Use power mixer for mixing
Insufficient mixing or incorrect mixing ratio will result in uneven drying of the surface and weaken the properties of the coating.
Application
In order to obtain an even, non-porous finish, spray a misty coat: first a thin layer, then let the solvents evaporate for 5–30 minutes and then apply the full coat.
For airless spraying, the product is thinned depending on the temperature of the components (base, hardener, thinner) approximately 10–22% to the viscosity 20–25s (DIN4)
Recommended nozzle tip is 0.011"–0.013" and pressure 120–160 bar
Spray angle shall be chosen according to the shape of the object
For conventional spraying, the product is thinned to the viscosity 20–25s (DIN4)
Recommended nozzle tip is 1.2–1.8 mm and pressure 3–4 bar
For brush application product should be thinned according to the circumstances
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Tikkurila Temadur 90 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Tikkurila Temabond ST 200 is a two component high-solids, aluminium pigmented modified epoxy maintenance paint for demanding surfaces such as steel structures, railway vehicles, and infastructure in energy and telecommunications.Surface-tolerant high-solids epoxy paint. Very good adhesion even to hand-prepared steel. Lower VOC emissions...
Tikkurila Temabond ST 300 is a two-component high-solids, modified tintable epoxy maintenance paint for demanding surfaces, and is recommended for repairing of damages caused by transport or installation.Surface-tolerant with a wide colour range For steel and concrete surfaces Very good adhesion, even to hand-prepared steel Lower VOC...
Tikkurila Temacoat GF Primer is a two component, polyamide cured epoxy primer containing zinc phosphate that is used as a primer for steel, zinc and aluminium surfaces.For industrial and professional use only For use in epoxy and polyurethane systems For use where high requirements for appearance are set Recommended for agricultural...
Tikkurila Temacoat GPL-S MIO is a two-component, polyamide cured epoxy paint pigmented with micaceous iron oxide, with superior adhesion to steel surfaces forming a very strong and durable film that can be used as a primer or an intermediate coat in aggressive environmentsFast cure and low-temperature cure hardeners available - click to...
Tikkurila Temacoat GPL-S Primer is a two-component, polyamide-cured high build epoxy primer containing zinc phosphate.Excellent adhesion to steel, zinc and aluminium surfaces. Used as a primer or an intermediate coat in paint systems exposed to abrasion and chemical stress. Can be overcoated after a prolonged period of time. Faster...
Tikkurila Temacoat RM 40, a two-component, resin modified epoxy primer/topcoat that can be used as a single-coat system.Good adhesion to steel, zinc and aluminium surfaces exposed to severe abrasion or chemical stress Suitable for concrete surfaces and has a CE marking Can be used on steel structures in wet environments, e.g. inside...
Tikkurila Temacoat SPA 50 is a two-component resin modified epoxy paint that can be applied to steel, zinc and aluminium as an excellent primer, intermediate or finish coat on surfaces exposed to stress and is also suitable as a single-coat system.Rapidly recoatable and ready to handle paint Forms durable film with good mechanical,...
Tikkurila Temacoat SPA Primer, a two-component resin modified epoxy primer with anti-corrosive pigments with excellent adhesion to steel, zinc and aluminium surfaces, that can be applied in thick layers, thus enabling faster production.Has high solids content Used as a primer or an intermediate coat in paint systems exposed to abrasion...
Tikkurila Temadur 10, a two-component matt polyurethane paint containing anti-corrosive pigments used as a single-coat paint for steel, zinc and aluminium surfaces.Huge colour range available with RAL, BS & NCS shades Can also used as a primer or a matt topcoat in epoxy systems exposed to weathering and/or chemical stress...
2-pack semi-matt polyurethane paint with 3,800+ colours that can be used as a single-coat paint for steel, zinc and aluminium surfaces with its anti-corrosion pigmentation, and also used as a primer or as a semi-matt topcoat in epoxy-polyurethane systems. It is also suitable for use on uPVC.Resistance to weathering and abrasion MED...
Tikkurila Temadur Clear provides extra protection and colour and gloss improvement, used for topcoating polyurethane paint systems making the paint film durable, non-chalking and easy to clean.Two-component, glossy polyurethane varnish, hardener aliphatic isocyanate MED (Marine Equipment Directive) certificate no EUFI29-19002225- MED and...
Tikkurila Temafloor P300, a two-component, solvent-free, self-levelling epoxy coating for new and old concrete floors exposed to heavy mechanical and chemical stress in industrial and storage facilities, withstanding water, oils, greases, chemicals and dilute solutions of non-oxidizing acids, alkali and salt solutions.Huge colour range...
Tikkurila Temafloor PU is a solvent-free, elastic two-component polyurethane coating.For new and old concrete and asphalt floors exposed to mechanical and chemical stress Withstands water, oils, greases, chemicals and dilute solutions of non-oxidizing acids, alkali and salt solutions. Resists only temporary splashes of oxidizing acids and...
Tikkurila Temafloor PU UV is a solvent-free polyurethane paint, that has excellent UV-resistance and withstands mechanical and chemical stresses. It`s also a high-solids, flexible and weather resistant two-component polyurethane coating.Excellent resistance to UV Silent, does not shrink or crack Withstands mechanical and chemical stress...
Tikkurila Temaprime GF is a fast-drying one-component anti-corrosive pigmented special primer. Recommended uses include haulage equipment, agricultural, construction and other machinery.Huge colour range available Primer for steel, aluminium and zinc surfaces Recoatable also with polyurethane paints Excellent anti-corrosive properties...
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...