Tikkurila Temasolid SC 60 is a two-component semi-gloss polyaspartic paint, containing anti-corrosive pigments. It has a high solids content and low VOC which reduces application time.
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Tikkurila Temasolid SC 60 is a high solids content and low VOC two-component semi-gloss polyaspartic paint. It contains anti-corrosive pigments, and the hardener is aliphatic isocyanate.
A durable, easy-to-clean and non-chalking paint with excellent gloss and colour retention, as well as excellent weathering and abrasion resistance.
The low VOC and high solids content reduces application time and maximizes production throughout at normal room temperature conditions without need for forced drying at higher temperatures. This results in lower energy costs in painting facilities.
Recommended to be used especially as a single-coat finish for agricultural and earth moving machinery and other machinery and equipment.
Volume Solids: 81±2%.
Weight Solids:89±2%.
Specific Gravity: 1.4±0.1 kg / l (mixed).
Mixing Ratio:
Recommended Film Thicknesses and Theoretical Coverage:
| Recommended film thicknesses | Theoretical coverage | |
|---|---|---|
| Wet | Dry | |
| 100µm | 80µm | 10.1 m²/l |
| 150µm | 120µm | 6.8 m²/l |
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Drying Time:
| DFT 80µm | 23°C / RH 30% | 23°C / RH 50% | 23°C / RH 80% |
|---|---|---|---|
| Dust dry, after | 1h 15min | 40min | 30min |
| Touch dry, after | 5h | 3h | 1h |
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Gloss: Gloss.
Colour Shades: RAL, NCS, BS, White.
Airless Spraying:
Conventional Spraying:
Thinner 1048 or 1067.
The Volatile Organic Compounds amount (ISO 11890) is 170 g/litre of paint mixture. VOC content of the paint mixture (thinned 10% by volume) is 230 g/l.
Further information about hazardous influences and protection are detailed in individual health and safety data sheets.
For industrial and professional use only.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Tikkurila Temasolid SC 60 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Tikkurila Fontecoat EP 50, a two-component water-borne epoxy topcoat and a single-coat paint recommended for framework, service platforms, conveyors and other steelwork, machinery and equipment. The product has MED (Marine Equipment Directive) certificate no VTT-C-12360-15-18 and is thus accepted for painting surfaces inside ships.Huge...
Tikkurila Fontecryl AP is a water-borne, one-component fast-drying acrylic based primer for various surfaces containing active anti-corrosive pigments.Provides excellent adhesion Used as an anti-corrosive primer on steel, aluminium and zinc surfaces Suitable for dipping Can be overcoated both with water and solvent-borne topcoats Wide...
Tikkurila Fontezinc 85 is a two-component, water-borne zinc-rich epoxy paint that is a more environmentally friendly option for bridges, cranes and steel framework as well as steelwork and equipment in the forest and chemical industries.Offers cathodic protection of steel For paint systems in severe environments Can withstand severe...
Tikkurila Temabond ST 200 is a two component high-solids, aluminium pigmented modified epoxy maintenance paint for demanding surfaces such as steel structures, railway vehicles, and infastructure in energy and telecommunications.Surface-tolerant high-solids epoxy paint. Very good adhesion even to hand-prepared steel. Lower VOC emissions...
Tikkurila Temacoat GPL-S Primer is a two-component, polyamide-cured high build epoxy primer containing zinc phosphate.Excellent adhesion to steel, zinc and aluminium surfaces. Used as a primer or an intermediate coat in paint systems exposed to abrasion and chemical stress. Can be overcoated after a prolonged period of time. Faster...
Tikkurila Temacoat SPA Primer, a two-component resin modified epoxy primer with anti-corrosive pigments with excellent adhesion to steel, zinc and aluminium surfaces, that can be applied in thick layers, thus enabling faster production.Has high solids content Used as a primer or an intermediate coat in paint systems exposed to abrasion...
Tikkurila Temanyl PVB is a one-component, polyvinyl-butyral adhesion primer. Adheres extremely well to different kinds of surfaces, such as steel, zinc, aluminium and stainless steel.The primer ensures the durability of the whole painting system. A very fast-drying adhesion primer, which saves time during the application process....
Tikkurila Temazinc 99, a 2-component, polyamide cured zinc-rich epoxy paint providing superior cathodic protection for steel, used as a primer in epoxy, polyurethane, acrylic and chlorinated rubber systems for steel surfaces exposed to severe climatic conditions.Prequalified in the NORSOK system 1; an excellent choice for the most...
Tikkurila Temazinc 77, a primer with good cathodic protection for steel containing over 80% zinc, fully meeting requirements of the standard ISO 1294-5 for zinc-rich primers.Used in coating systems where extended durability is required Used as a primer in epoxy, polyurethane, acrylic and chlorinated rubber systems for steel surfaces...
Tikkurila Thinner 1048 is a thinner for polyurethane paints, oxirane ester paints, 2-component acrylic paints, polyaspartic paints and polysiloxane paints. For use with recommended Tikkurila products.
Tikkurila Thinner 1067 is a slow thinner for polyurethane paints and polyaspartic paints.Designed for use with recommened Tikkurila products
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...
