Degrease if necessary. Derust substrate according to the conventional derusting techniques (sandblasting Sa2 and mechanical sanding St3). On a humid substrate, apply the first coat by brush or roller
Directions for Use
To ensure homogeneity, coating materials should be thoroughly stirred prior to use.
Application
Conditions
May be applied in humid weather conditions. Minimum ambient temperature: -5°C.
On new galvanised surfaces and new zinc apply first a coat of Metal Cladding Primer or PVDF Primer.
For more technical details, consult the data sheet (downloadable from the "Data Sheets" tab further above). Got a query? Contact our technical team on 0113 2455450 (option 2) or send a message to [email protected].
Product Details
14A.7016.5
Data sheet
Manufacturer
Rust-Oleum
For Use By
Professional Use
Interior / Exterior Use
Exterior Use
For Use On
Iron galvanised steel aluminium zinc
Application Method
Brush roller spray
Sheen
Satin
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Pack Size
5L, 20L
Application
Brush, Roller, Spray
Dry to Recoat (at 20°C)
24 - 48 hours
Fully Cured (at 20°C)
1 week
Coverage
2.9 m²/l per coat (it is recommended to apply 2 coats)
Recommended Thinner/Cleaner
Thinner 22
Min. Application Temperature
-5°C
Density
1.15
Solids by Volume
46 %
VOC
500 g/l
Shelf Life (from date of manufacture)
2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Recommended Dry Film Thickness
160 µm
Recommended Wet Film Thickness
345 µm
UN Number
UN1263
Base Type
Solvent-Based
Suitable For Use On
Galvanised Steel
Suitable For Use On
Zinc
Suitable For Use On
Steel
Suitable For Use On
Iron
Suitable For Use On
Aluminium
Finish
Satin
Application Method
Roller
Application Method
Brush
Application Method
Spray
Usages
Anti-Corrosion
Usages
Protects Against Cracking And Peeling
Usages
Corrosion Resistance
Usages
Low Temperature
Usages
UV Resistance
Usages
UV Resistant
Usages
Impact Resistance
Usages
Moisture Tolerant
Usages
Direct to Metal
Usages
Flexible
Usages
Atmospheric
Usages
Primer/Finish
Product Type
Topcoat
Brand
Rust-Oleum
Colour Family
Red
Colour Family
Anthracite Grey
Colour Family
Green
Colour Family
Black
Colour Family
Grey
Categorised As
Cladding > Low Temperature Metal & Plastisol Cladding Paints
Categorised As
Roof Paints > Low Temperature Pitched Metal Roofs
Categorised As
Metal Paints > Low Temperature Direct-to-Metal Paints
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Can this be used on previously painted surfaces if they are lightly sanded or does it need to go onto bare metal?
Answer from Rawlins’ Technical Team:
This can be applied to a previously painted substrate assuming it is clean, dry and sound.
We would recommend to test on a small area for compatibility and adhesion prior to full application.
chris hall on 2018-01-31 15:01:05
Question:
Good Afternooon, I am pricing a job up and looking to use the product of Rust-Oleum Mathys Noxyde Pegarust. In terms of colour the client wants yellow (08E51) but this colour isn't indicated on your colour choices. Is there any way that this colour could be mixed. Alternatively if the colour cant be mixed do you have an alternative product in that colour that has the same properties as the Pegarust. Thanks, Chris
Answer from Rawlins’ Technical Team:
On orders over 500 litres Rust-Oleum Mathys Noxyde Pegarust can be produced in most RAL and BS colours. If you do not require this much then you would need to provide our Technical Department with the details and requirements of your project for an alternative product to be specified - [email protected]
Mark berry on 2018-01-08 15:45:11
Question: Can you please advise on maintenance/cleaning after application for noxyde pegarust.thanks
Answer from Rawlins’ Technical Team:
In terms of cleaning we would suggest washing with a 3% solution of Rust-Oleum Mathys ND14 Cleaner Degreaser but at a low pressure such as 100 to 200 psi as an indication.
In terms of maintenance, any instances of mechanical damage should be repaired via local application of the original system after local degreasing and abrasion of the affected area.
In both instances of cleaning and maintenance we would advise that both are conducted at least annually.
Rust-Oleum Noxyde Pegarust is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
Rust-Oleum Thinner 22 is for the dilution of synthetic enamels and varnishes for airless application. Degreasing of metals and most wood types. Cleaning of `spots` of acrylic paints and acrylic fixing paints (e.g. on glass). Best used to dilute the following products:Primer 44 Fassiclor Galvaprim Vernac Gloss Vernac SatinMore...
Rust-Oleum Mathys Noxyde Peganox is a water based, low VOC, single component, elastomeric coating that provides rust-proofing, corrosion and waterproofing protection optimized for brush or roller application. It forms an anti corrosive membrane that has a high resistance to water, salt spray, acid and aggressive environments making it...
Rust-Oleum Mathys Metal Cladding Primer is a water based primer specially designed for application on weathered metal cladding to provide a perfect base for Rust-Oleum Mathys Metal Cladding Topcoat, also suitable for bare or blasted steel, galvanized steel, zinc and aluminium.Single pack anti-corrosion primer Can be overcoated after just...
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...
Ultimate water-based corrosion protection, rust prevention, and waterproofing on iron, steel, special alloys, galvanised and metallised iron and steel, aluminium, copper, zinc, lead, etc.Primer and topcoat in one - dry fall: saves preparation & clean up time For outside and inside use, with superior adhesion and high dirt pick up...
Ultimate water-based corrosion protection, rust prevention, and waterproofing in RAL7016 Anthracite Grey on iron, steel, special alloys, galvanised and metallised iron and steel, aluminium, copper, zinc, lead, etc.For Professional use Primer and topcoat in one - dry fall: saves preparation & clean up time For outside and inside use,...