Coo-Var Gold Paint
  • Coo-Var Gold Paint

Coo-Var Gold Paint


Coo-Var Gold Paint is a versatile finishing metallic paint that gives a gloss finish where a fast-drying finish is required.


  • Rust resistant
  • Interior/Exterior use
  • Touch dries in 30 minutes
  • Versatile
  • Gloss finish
  • Decorative
VAT excluded

£16.88 Tax incl.


Coo-Var Gold Paint is a versatile finishing metallic paint that gives a gloss finish where a fast-drying finish is required.

Recommended Uses

  • Primed metal
  • Wood
  • Railings
  • Gates
  • Radiators
  • Car components
  • Bicycles
  • Garden furniture
  • Boats
  • Trailers
  • Tools

Surface Preparation

Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates. Bare steel should be free from dust, rust and scale. Blast cleaning to SA 2½ is recommended. If blast cleaning is impractical, mechanical cleaning should be employed but hand cleaning does not clean the steel to the required degree. Any oil or grease should be removed with solvent before de-rusting. Where blast cleaning is carried out after assembly, special attention must be paid to edges, corners, nuts, bolts welds, etc. Welds should, if necessary be ground and all weld spatter, slag etc. must be removed.


Apply a minimum of 2 coats.

By Brush: apply a thin coat briskly direct to the surface. Leave to dry for 15-30 minutes before
re-coating with a full coat.

By Spray: thin carefully to required consistency (if in doubt consult Coo-Var Technical Services). Apply a mist coat followed by a full coat after 2-4 minutes. When applying additional coats (e.g. on rough surfaces), re-coat as soon as the coat is dry - usually within 15-30 minutes. Any further coats should be applied as soon as possible but certainly within 4 hours after which time the paint will have started the curing period.

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details

Data sheet

Typical Coverage (per coat)
10m² per litre
Touch Dry
30 Mins
Brush, Spray

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Be the first to ask a question about this product!

Question about the product

* Required fields
16 other products in the same category:

Sika Permacor 2707

Sika Permacor 2707 is a 2-pack epoxy resin topcoat with high mechanical resistance and with excellent chemical resistance to aqueous and alkaline exposure. Sika Permacor 2707 is used as a top coat for metal surfaces exposed to extreme interior environments, e.g. for highly exposed structures, pipe work, cladding panels, railings, machines and other...

Price £249.73
In stock

Hydron Nu-Base PU Floor Finish

Nu-Base PU Floor Finish has the power to withstand tough applications, where temperatures may reach 150°C, or where chemicals may be present. Advantages Excellent for industrial flooring. Two pack solvent-based. FeRFA Class Type 2. Excellent for industrial flooring.

Price £203.75
In stock

Jotun Se-lett Clear Varnish

Jotun Se-lett Clear Varnish is a one component physically drying acrylic coating with a semi gloss finish with good gloss retention to be used as a clear varnish in atmospheric environments on top of Jotun Se-lett.

Price £12.31
In stock

Eagle Aluminium Paint

Eagle Aluminium Paint, a topcoat for bitumen coatings and substrates that provides protection against solar degradation and heat gain with a solar-reflective finish. Dry in approx. 1 hour For use on: Bituminous coatings Aged asphalt Primed steel Apply by brush or mohair roller Requires just 2 coats

Price £23.00
In stock

Jotun Hardtop HB

Jotun Hardtop HB is a two component chemically curing aliphatic acrylic polyurethane coating that has a matt finish with very good gloss retention. It is a high build product that can be used as a topcoat in atmospheric environments. Jotun Hardtop HB is recommended for topside, deck and superstructure areas in the marine industry.

Price £51.51
In stock

Zinga Zingatarfree

Zingatarfree (Formally PU Tarfree MIO) is ideal for marine environments and immersion, such boat hulls, with excellent water, corrosion and chemical resistance, and can be used as a replacement for normal coal tar products Single-pack polyurethane paint Use as part of a duplex system with Zinga Apply by brush, roller, conventional...

Price £23.55
In stock

Jotun Se-lett

Jotun Se-lett is a one component oxidatively drying alkyd coating that has a matt finish and is a specially designed bright colour to be used as mid coat as part of a complete system in atmospheric environments. Jotun Se-lett is recommended for warning signs and as a signal colour.

Price £30.17
In stock

Bradite Solar Reflective Bitumen

Confirming to BS 3416 and BS 6949, Type 1 Class A, this solar reflective bitumen coating is perfect for steel, non-ferrous metals, concrete, brick and asphalt, where a tough waterproof coating is required on surfaces. Advantages Hard-wearing gloss finish Repels water fast-drying High build coating

Price £58.19
In stock

Cromadex 943 Acrylic Stoving Topcoat

Cromadex 943 Acrylic Stoving Topcoat is a stoving topcoat with direct metal adhesion, helping to reduce application costs. It has good exterior durability making it suitable for many applications. Available in a wide range of colours and gloss levels, including BS, RAL, metallics, sparkles and special matches all in a lead free finish. Life expectancy of...

Price £83.01
In stock

Jotun Ultra Topcoat

Jotun Ultra Topcoat is a one component oxidatively drying alkyd coating that has a gloss finish with good gloss retention is fast drying. To be used as a topcoat in atmospheric environments. Recommended for engines, topside, deck and superstructure.

Price £47.21
In stock

Bradite HD Floor + Wall

Bradite HD Floor + Wall is a heavy-duty coating for walls and floors that is well-suited to factory and industrial environments that need ultra protection and an easy-to-clean surface. Also suitable for hygene-sensitive areas such as hospitals and more. Advantages Water-based epoxy coating Conforms to ISO 9001:2008 quality & ISO 14001:2004 Resists...

Price £83.52
In stock

Cromadex 200 One Pack Air Drying Alkyd Topcoat

Cromadex 200 One Pack Air Drying Alkyd Topcoat is a one pack air drying topcoat that comes in a high opacity formulation enabling simpler application that reduces processing time. The product offers a high level of gloss giving a superb decorative appearance. The unique resin and pigment technology used enables both a wide variety of applications and a...

Price £42.47
In stock

Zinga Zingaceram PU

Zingaceram PU, a 2-pack system with ceramic particles for high chemical and abrasion resistance in tough environments, such as dust and wind-blown sand. Recommended for use as a top coat finish in a Zinga system. Price on Application Please contact our sales team on 0113 2455450 to place an order or send us a message. Available in most...

In stock

Sherwin-Williams L654

Sherwin-Williams L654 (formerly known as Metagrip L654) is a quick drying micaceous iron oxide paint, which provides a tough hard wearing abrasion resistant functional coating for the protection of external steel work such as storage tanks, pylons, bridges etc., with good durability under industrial and coastal exposure conditions. Suitable for...

Price £60.63
In stock

Kem-Kromik 530

Kem-Kromik 530 (formerly known as Sherwin-Williams C530 or as Leighs C530) is a high quality, quick drying, lead free single pack alkyd gloss finish for interior and exterior surfaces, ideally suited for equipment manufacturers and for structural steelwork. Kem-Kromik 530 possesses excellent gloss and colour retention and outstanding...

Price £82.05
In stock

Cromadex 942 Medium Texture Stoving Topcoat

Cromadex 942 Medium Texture Stoving Topcoat is a stoving topcoat that comes in a medium texture finish that adds value to your article. The choice of stoving schedules enables production flexibility. The mar resistance of Cromadex 942 makes it suitable in tough environments. Available in a wide range of colours including BS, RAL and special matches all in...

Price £91.52
In stock