• Blackfriar Quick Drying Metal Paint

Blackfriar Quick Drying Metal Paint


Blackfriar Quick Drying Metal Paint has been specially formulated to provide a tough, long-lasting, high gloss finish. It is heat resistant up to 150ºC/300ºF. It can be used inside and outside on metal and wood, and is ideal for factory maintenance such as plant and machinery, as well as around the home.

Product Details

  • Interior and exterior use.
  • For metal and wood.
  • Hardwearing.
  • Heat resistant to 150ºC/ 300ºF.
  • Resists fuels, oils and grease.

  • Current colour: Grey
Choose a colour
Close colour picker
  • White
  • Black
  • Silver
  • Grey
  • Yellow
  • Red
  • Landrover Green
  • Blue
VAT excluded

£25.09 Tax incl.


Blackfriar Quick Drying Metal Paint has been specially formulated to provide a tough, long-lasting, high gloss finish. It can be used inside and outside on metal and wood, and is ideal for factory maintenance such as plant and machinery, as well as around the home on cars, bicycles, garden furniture, gates, railings and garage doors etc.


Ensure surface to be coated is clean, dry, sound and free from wax, grease or any other contamination. Previously painted surfaces in sound condition should be abraded and degreased prior to direct application of Blackfriar Quick Drying Metal Paint. Remove any rust and abrade back to a clean bright surface before priming with Blackfriar Anti-Rust Primer.

New or other bare surfaces should be primed with the appropriate Blackfriar Primer. No undercoat is necessary. Galvanised metal should be degreased and primed with Blackfriar Multi-Surface Primer.


Stir thoroughly prior to use with a broad stirrer. The product may be applied by brush, roller or spray. Two coats are recommended to give best protection.


Not recommended.


Do not use under cold (less than 5°C), damp or humid conditions. For full fuel / oil resistance allow to dry for at least 3 days before use. Blackfriar Quick Drying Metal Paint in Silver is not resistant to petrol, fuel oil or brake fluid. Not suitable for direct application to galvanised metal, use Blackfriar Multi-Surface Primer first.

Drying Times

Touch dry in 2 - 4 hours. Recoat after 16 hours and within 3 days. Drying times are based on an ambient temperature of 20°C and 50% relative humidity. Lower temperatures or higher humidity will prolong the drying and overcoating times.

Clean Up

Remove as much product as possible from application equipment before washing with white spirit. Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings.


Store in a dry, safe place. Do not store in environments where extreme temperatures may occur. Keep within 5-30°C. Do not store in direct sunlight.


  • Tough and durable
  • Heat-resistant to 150ºC/300ºF
  • Resists occasional fuel splashes and minor oils and grease contamination
  • Easy to apply on large surfaces

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details

Data sheet

Blackfriar Professional
For Use On
Metal, Wood
Application Method
Brush, Roller, Spary
Standard / Ready Mixed
Single, Two or Three Pack
Pack Size
1L, 2.5L
Base Type
Solvent Based
Suitable Substrates
Metal, Wood
Brush, Roller, Spray
Dry to Recoat (at 20°C)
16 hours
14m² per litre
Recommended Thinner/Cleaner
Do not thin/Clean with White Spirit
Heat Resistance (up-to)
Touch Dry
2-4 Hours
UN Number

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

questions Rob on 2018-01-03 08:24:34
Question: With regard to the yellow variety of this paint, would it be classed as a fluorescent paint?

No, but you can see our range of fluorescent paints HERE.

Question about the product

* Required fields
You might also like

Blackfriar Multi-Surface Primer

Blackfriar Multi-Surface Primer has been specially formulated to prime multiple surfaces prior to further painting. It’s ideal for hard and soft woods, chipboard, plywood, GRP, MDF, exterior UPVC, ceramic tiles, iron, steel, galvanised and non-ferrous metals (aluminium, brass, chrome, copper) and old plaster. Product Features Interior and...

Price £25.37
In stock

Blackfriar Anti-Rust Primer

Blackfriar Anti-Rust Primer is a rust inhibiting primer containing Zinc Phosphate for the protection of ferrous metals. Specifically formulated for painting metal surfaces to prevent corrosion. Recommended for use with Blackfriar Quick Drying Metal Paint. Product Features For ferrous metals. Interior and exterior use. Anti-corrosive....

Price £16.43
In stock