Hempel's Pro Acrylic 55883 is a two-component, isocyanate-free, acrylic finishing coat with good gloss and colour retention. It is resistant to water and spillage of aliphatic hydrocarbons
For professional use only
Finishing coat for protection of structural steel in severely corrosive environment, where light-fastness and gloss retention are required
Meets requirements to NORSOK M-501 when used as part of a predefined paint system. Edition 6, System 1
Note: White shades and light colours may yellow when exposed in indoor environments
Product customisation
Don't forget to save your customization to be able to add to cart
Hempel's Pro Acrylic 55883 is a two-component, isocyanate-free, acrylic finishing coat with good gloss and colour retention. It is resistant to water and spillage of aliphatic hydrocarbons.
For use as a finishing coat for protection of structural steel in severely corrosive environment, where light-fastness and gloss retention are required.
Features & Benefits
For professional use only
Isocyanate-free
Two-component
Good gloss and colour retention
Resistant to water and spillage of aliphatic hydrocarbons
Cures down to 0°C
Service temperatures up to 120°C (dry exposure)
Finishing coat for protection of structural steel in severely corrosive environment, where light-fastness and gloss retention are required
Meets requirements to NORSOK M-501 when used as part of a predefined paint system. Edition 6, System 1
Apply with roller or airless spray. Nozzle pressure: 150 bar [2200 psi] Nozzle orifice: 0.017-0.019"
Two coats of the topcoat may be necessary to obtain full hiding power
Spray data are indicative and subject to adjustment. Pressure is for a material temperature of 20°C.
Product may be specified in another film thickness than indicated depending on purpose and area of use. This will alter spreading rate, drying and curing time and overcoating interval. For best performance, avoid excessive film thickness.
Hempel’s Specification supersedes any recommendations given in the Product Data Sheets
Product Details
7021-903044
Data sheet
Manufacturer
Hempel
For Use By
Professional Use
Interior / Exterior Use
Interior & Exterior
For Use On
Steel
Application Method
Roller, airless spray
Sheen
Gloss
VOC Levels
362 g/L
Single, Two or Three Pack
Two-Pack
Product Certifications
Meets requirements to NORSOK M-501 when used as part of a predefined paint system. Edition 6, System 1.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Hempel Pro Acrylic 55883 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Hempel's Thinner 08450 is a general purpose thinner for Hempadur qualities.For paint to be applied in a low film thickness (for instance as a "sealer coat") or if the paint has become too thick, e.g. in cold weather Tools can usually be cleaned with the thinner prescribed for the productMore Information Delivery Info
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...