Teamac Rapidry QD Enamel, is a fast drying industrial gloss finish, giving a good durable, protective coating to metal surfaces primed with Teamac Rapidry High Build Zinc Phosphate Primer or similar.
Used as a quick drying finish for structural steel and metal fabrications
Good coverage, up to 11m2/l
Available in 2,500+ coloursfrom RAL, BS, NCS and the new NCS 2050 colours
Product customisation
Don't forget to save your customization to be able to add to cart
Teamac Rapidry QD Enamel, is a fast drying industrial gloss finish, giving a good durable, protective coating to metal surfaces primed with Teamac Rapidry High Build Zinc Phosphate Primer or similar.
Used as a quick drying finish for structural steel and metal fabrications
Good coverage, up to 11m2/l
Available in 2,500+ coloursfrom RAL, BS, NCS and the new NCS 2050 colours
Product Specification
Technical Data
Volume Solids
41 to 44%
VOC Content
Max 550 g/litre
SG
0.98 to 1.18°C
Viscostity
2.0 to 2.2 Poise - C&P @ 25°C
Flash Point
40°C (closed cup)
Film Thickness Range And Coverage
Product Data
Dry Film Thickness
Wet Film Thickness
Theoretical Coverage
Maximum
50 μm
125 μm
11 m12/litre @ 38 microns D.F.T
8 m12/litre @ 50 microns D.F.T
The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application.
Drying Times
Drying Times At 20°C/RH 50%
Touch Dry:
1 Hour
Dry To Handle:
4 Hours
Dry To Recoat:
30 minutes or 12 hours
Fully Cured:
3 - 5 Days
Low temperature and high humidity will adversely affect application, drying and performance of any coating.
Surface Preparation
Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates.
Bare steel should be free from dust, rust and scale. Blast cleaning to SA 2½ is recommended.
If blast cleaning is impractical, mechanical cleaning should be employed as hand cleaning does not clean the steel to the required degree.
Any oil or grease should be removed with Teamac Universal Degreaser before de-rusting.
Where blast cleaning is carried out after assembly, special attention must be paid to edges, corners, nuts, bolts, welds etc.
Welds should, if necessary be ground and all weld spatter, slag etc. must be removed.
See safety data sheets - SDS 10730 for black and dark colours, SDS 10731 for white, blue and pale colours and SDS 10853 for all other colours in the attachments section above.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Teamac Rapidry QD Enamel is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
A specially formulated blend of solvents designed to mix with its compatible Teamac or Coo-Var coating to create an optimal consistancy for application.
Suitable for application by Brush, Roller or Spray.
Teamac Thinner 16 can also be used for the cleaning of some surfaces prior to application of the coating.
Suitable for cleaning of the...
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.
Provides an economical way of making sure you will have what you need
Ideal for interior and exterior paint projects
Click to jump down to...
Teamac Rapidry HB Zinc Phosphate Primer, is a high build, high performance quick drying metal primer. It has excellent anti-corrosive properties.
Anti-corrosive
Rapid drying
Use on iron
Use on Steel
Semi-Matt Finish
Available from 1L up to 20L sizes
Please Note: 20L size is subject to a MOQ of 4 units and is only available on...
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3).
Please click here for important information about these kits.
Kit Contents:
SET 1 (Hand Tools)
1 x Rust-Oleum...