A high solids and abrasion resistant coating which can be used as a primer, intermediate coat, or self-priming finish over steel or inorganic zinc primers. May be topcoated with itself, or a broad variety of high performance finish coats. Top Features Low odor and low VOC Good chemical resistance Used as a primer, intermediate, or finish...
Bedec Radiator Paint
A quick drying, high quality water based paint incorporating traditional and new technology that will stay white even under heat.
Bedec Radiator Paint incorporates traditional and new technology to produce a quick drying, water based product that will resist yellowing under heat. Available in white matt, satin or gloss finishes.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller, Spray
- 10m² per 750ml
- Touch Dry
- 30 Mins
Be the first to ask a question about this product!
Cromadex 242 One Pack Fast Air Drying Alkyd Medium Texture Topcoat is a one pack fast air drying topcoat that comes in a medium texture finish that adds value to your article. It has excellent covering power to help reduce application costs. The product has a fast touch dry time enabling improved productivity.
Zingaceram PU, a 2-pack system with ceramic particles for high chemical and abrasion resistance in tough environments, such as dust and wind-blown sand. Recommended for use as a top coat finish in a Zinga system. Available in more than 150 RAL colours Topcoat 2-pack system for Zinga Apply by brush, roller, conventional sprayer or airless...
A high performance single pack chlorinated rubber gloss finish with excellent chemical & water resistance. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Resistant to fungal growth Highly resistant to oils and chemicals Ideal for water immersion, such as swimming pools
Blackfriar Aluminium Paint is heat resistant up to 150ºC and provides long-lasting, heat-resistant protection for interior and exterior surfaces, for use on metal and wood, on surfaces including car wheels, gates, railings, pipework etc.
PPG SigmaZinc 160 is a two-component, moisture-curing inorganic zinc (ethyl) silicate anti-corrosive primer for structural steel. This low-temperature curing coating is suitable as a system primer in various paint systems based on unsaponifiable binders. Top Features Galvanic action eliminates sub-film corrosion Can withstand substrate...
International Intersheen 579 is a fast drying, single component, modified acrylic finish intended for use as a sealer coat for single pack acrylic intumescent coating systems but may also be used as a cosmetic finish over single pack primers and intermediates.
Rust-Oleum's hard wearing, washable polyurethane coating (9200) is now also available in convenient 1 litre packaging. Ideal for smaller projects the new convenient 2-component packaging provides the base and activator in one convenient kit and the activator is supplied with a user-friendly spout cap.
International Interfine 979 significantly improves upon the gloss and colour retention exhibited by typical polyurethane finishes also displays the same corrosion resistance and has enhanced mechanical properties when compared to traditional epoxy technology.
Eagle Aluminium Paint, a topcoat for bitumen coatings and substrates that provides protection against solar degradation and heat gain with a solar-reflective finish. Dry in approx. 1 hour For use on: Bituminous coatings Aged asphalt Primed steel Apply by brush or mohair roller Requires just 2 coats
Jotun Penguard Topcoat is a two component polyamide cured high molecular weight epoxy coating that has a gloss finish with fair gloss retention. To be used as topcoat in atmospheric and immersed environments. To be used as topcoat in atmospheric and immersed environments.
Thermilate Trade Warmtouch Paint is a quick drying, semi-gloss paint which makes handrails and metal surfaces warm to the touch. It also reduces handrails becoming slippery due to precipitation and condensation and conforms to the Health and Safety Building Regulations 2000 law.
An aluminium-pigmented, low temperature curing mastic for steel, designed for cold weather applications down to 0 °F (-18 °C). This unique coating provides excellent corrosion resistance over existing finishes and rusted or SSPC-SP2 or SP3 cleaned steel. Top Features Single coat application characteristics Suitable as a topcoat VOC...
Cromadex 740 Two Pack Epoxy Fine Texture Topcoat is a two pack epoxy fine texture topcoat with excellent chemical resistance suitable for interior use only. The product offers a fine texture appearance for an aesthetic finish. The product can be air dried or stoved enabling flexibility in production. Available in a wide range of colours and gloss levels,...