Fast-curing 2-pack, high solids, low VOC, acrylic finish in 6,700+ shades for solid colours and single-layer metallic finishes.
Suitable for use on Painted/Primed Surfaces for the coating of machinery, agricultural and construction equipment, and many other industrial painting applications
Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours
*Note: RAL Pearl colours shown are approximations only - matches will not be exact
Product can be purchased as a Two Component Pack, or as Base or Hardener only
Selemix 7-120 2K Acrylic UHS Topcoat (Fast Curing) is a 2-pack, high solids, low VOC, acrylic finish for solid colours and single-layer metallic finishes.
It is compatible with Selemix Epoxy and Polyurethane primers, giving a durable and hard-wearing paint system.
Selemix 7-120 has a very high gloss finish, and excellent durability and UV stability.
It is suitable for the coating of machinery, agricultural and construction equipment, and many other industrial painting applications where a highly durable, high gloss finish is required.
Suitable for use on Painted/Primed Surfaces for the coating of machinery, agricultural and construction equipment, and many other industrial painting applications
Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours
*Note: RAL Pearl colours shown are approximations only - matches will not be exact
Excellent durability and UV stability
Product can be purchased as a Two Component Pack, or as Base or Hardener only
Application by conventional spray
For Professional Use Only
Surface Preparation
Apply only on a clean and dry surface with a temperature above the dew point to avoid condensation. In confined spaces, provide adequate ventilation during application and drying.
Painted Surfaces, Polyurethane or Polyester Fillers:
Machine sand with P320-400 discs and degrease
Selemix Epoxy Primers or PU Primers:
Refer to Primer TDS for recoat time
Mixing
Thoroughly mix paint before activating and check colour before use
Please Note: Refer to the Product Data Sheet for detailed information regarding mixing ratios for the relevant binder/base and hardener/activator used.
Application Notes
Features
Conventional Spray
Spraygun Setup:
Nozzle:
Gravity: 1.3-1.4mm
Suction: 1.6-1.8mm
Pressure feed: 0.85-1.2mm
Air Pressure:
HVLP: 2 Bar
Standard: 2-3 Bar
Fluid Pressure:
N/A
Number of coats:
2 (1 light and 1 full coat)
Flash-off between coats:
15-20 mins
Drying:
Air dry or bake at 60°C for 30-40 mins
Flash-off before bake:
10 mins
Wet Film Thickness:
90-100 microns
Dry Film Thickness:
50 microns
Please see the Product Data Sheet for detailed Application Instructions before use.
Theoretical Coverage
10-11 m²/L at 50 microns DFT
Note: Please see the Product Data Sheet for detailed information.
Drying Times
Drying Times 20°C
Dust Free
20 mins
Touch Free
1-2 hours
Tape Free
10-16 hours
Handleable
5-6 hours
Hard Dry
24 hours or after bake
Overcoating time
Minimum: when Hard Dry
Maximum: 24 hours by itself without sanding
Please Note: Lower temperature or film thickness higher than 50µm will extend drying times
Health & Safety
For comprehensive Health, Safety and Environmental advice, please refer to the relevant Material Safety Data Sheets and product can labels
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Selemix 7-120 2K Acrylic UHS Topcoat (Fast Curing) is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
For use with selected products in the Selemix range including Selemix 2K Polyurethane Direct Topcoat.Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use OnlyMore Information Delivery Info
For use with selected products in the Selemix range including Selemix 7-110 2K Acrylic Topcoat.Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use OnlyMore Information Delivery Info