High-performance 2K acrylic polyurethane clearcoat, in Matt or High Gloss, designed to provide high scratch resistance, weathering resistance and gloss retention.
Designed to be applied directly over Selemix 7-53x 2K Direct Topcoatswithout any sanding of the topcoat as long as the topcoat is oven baked or overnight air dried
Product can be purchased as a Two Component Pack, or as Base or Hardener only
Please note: Different gloss levels can be achieved by blending 4-0015 (Matt) and 4-0090 (Gloss) together - Please see 'Matting Chart' below or contact us on 0113 2455450(option 2) or send a message to [email protected]for details.
Selemix 4-0015/4-0090 2K Acrylic Clearcoat is a high-performance 2K acrylic polyurethane clearcoat, available in Matt or High Gloss, designed to provide high scratch resistance, weathering resistance and gloss retention.
Designed to be applied directly over Selemix 7-53x 2K Direct Topcoatswithout any sanding of the topcoat as long as the topcoat is oven baked or overnight air dried. Surfaces should be thoroughly degreased using the appropriate cleaner in case of dust or contamination.
Application can be by conventional spray.
Please note: Different gloss levels can be achieved by blending 4-0015 (Matt) and 4-0090 (Gloss) together - Please see 'Matting Chart' below or contact us on 0113 2455450(option 2) or send a message to [email protected]for details.
Designed to provide high scratch resistance, weathering resistance and gloss retention
Designed to be applied directly over Selemix 7-53x 2K Direct Topcoatswithout any sanding of the topcoat as long as the topcoat is oven baked or overnight air dried
Product can be purchased as a Two Component Pack, or as Base or Hardener only
Please note: Different gloss levels can be achieved by blending 4-0015 (Matt) and 4-0090 (Gloss) together - Please see 'Matting Chart' below or contact us on 0113 2455450(option 2) or send a message to [email protected]for details.
For Professional Use Only
Product Codes Explained
4-0015 - Selemix 2K Acrylic Clearcoat - Matt
4-0090 - Selemix 2K Acrylic Clearcoat - High Gloss
9-080 - Hardener forAcrylic
Please note: Different gloss levels can be achieved by blending 4-0015 (Matt) and 4-0090 (Gloss) together. Please see 'Matting Chart' below.
Surface Preparation
Apply only on a clean and dry surface with a temperature above the dew point to avoid condensation. In confined spaces, provide adequate ventilation during application and drying.
Please Note: Refer to the Product Data Sheet for detailed information regarding mixing ratios for the relevant binder/base and hardener/activator used.
Application Notes
Features
Conventional Spray
Spraygun Setup:
Nozzle:
Gravity: 1.3-1.6mm
Suction: 1.4-1.8mm
Pressure feed: 0.85-1.2mm
Air Pressure:
HVLP: 2 Bar
Standard: 2-3 Bar
Fluid Pressure:
N/A
Number of coats:
2
Flash-off between coats:
10 mins
Drying:
Air dry or bake at 60°C for 30 mins
Flash-off before bake:
10 mins
Wet Film Thickness:
100-125 microns
Dry Film Thickness:
40-50 microns
Please see the Product Data Sheet for detailed Application Instructions before use.
Theoretical Coverage
8.8-9.1m²/L at 40 microns DFT
Note: Please see the Product Data Sheet for detailed information.
Drying Times
Drying Times 20°C
Dust Free
20-30 mins
Touch Free
2-3 hours
Tape Free
6-12 hours
Handleable
2-3 hours
Hard Dry
24 hours or after bake
Overcoating time
Minimum: When Hard Dry
Maximum: 24 hours by itself without sanding
Please Note: Lower temperature or film thickness higher than 50µm will extend drying times
Health & Safety
For comprehensive Health, Safety and Environmental advice, please refer to the relevant Material Safety Data Sheets and product can labels
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Selemix 4-0015/4-0090 2K Acrylic Clearcoat is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Versatile, high solids 2-pack PU with 10% gloss finish for direct application to a variety of substrates without need for a primer.Suitable for use on Steel, Cast Iron, Aluminium, Light Alloys, GRP and Painted Surfaces Excellent anticorrosive properties Available in 10%, 30%, 50%, 70% and 80% Gloss Levels (click to view product)...
For use with selected products within the Selemix range including Selemix 2K Polyurethane Direct Topcoat, Selemix 7-110 2k Acrylic Topcoat and Selemix 2K Polyurethane Extra Topcoat.Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use OnlyMore Information...
For use with selected products in the Selemix range including Selemix 2K Polyurethane Direct Topcoat.Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use OnlyMore Information Delivery Info
For use with selected products in the Selemix range including Selemix 7-110 2K Acrylic Topcoat.Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use OnlyMore Information Delivery Info