A one-component gloss topcoat with 6,700+ colour options, based on high solids resins, which is water thinnable, providing a low VOC topcoat for internal and external use. Suitable for use with solventborne Selemix primers if completely dry, or suitably prepared Painted Surfaces.
Selemix 8-863 1K WB Synthetic Hydro-Thinnable Gloss Topcoat is a one-component product based on high solids resins, and is water thinnable, providing a low VOC topcoat for internal and external use. Suitable for use with solventborne Selemix primers if completely dry, or suitably prepared Painted Surfaces.
It is recommended as gloss finish for agricultural machinery, haulage equipment and other machinery and equipment. It combines the safety and easy-to-apply characteristics of waterborne technology with the mechanical and chemical resistant properties of the solvent based synthetic enamels. It also gives flexibility and durability.
A Matt version is also available - please see Selemix 8-864 1K WB Synthetic Hydro-Thinnable Matt Topcoat.
Please note: Other gloss levels are achievable when combined with 8-864 Matt Binder (prior to tinting) to give semi-gloss and semi-matt finishes - please contact our Technical Department before placing an order on 0113 2455450 (option 2) or send a message to [email protected] for details.
For Professional Use Only.
Apply only on a clean and dry surface with a temperature above the dew point to avoid condensation. In confined spaces, provide adequate ventilation during application and drying.
Selemix solventborne primers (if completely dry):
Painted Surfaces:
| Features | Conventional Spray | Air-Assisted Airless Spray |
|---|---|---|
By Weight: 8-864 Topcoat Water | By Weight: 1000 0-50 | By Weight: 1000 0 |
By Volume: 8-864 Topcoat Water | By Volume: 10 0-0.5 (0-5%) | By Volume: 10 No thinning required |
| Viscosity (at 20°C): | 55-65 secs DIN4 | As supplied |
| Pot Life (at 20°C): | Unlimited | Unlimited |
| Features | Conventional Spray | Air-Assisted Airless Spray |
|---|---|---|
| Spraygun Setup: | Nozzle: Gravity: 1.3-1.6mm Suction: 1.6-1.8mm Pressure feed: 0.8-1.2mm | Nozzle: 9-11 thou 0.23-0.28mm |
| Air Pressure: | HVLP: 2 Bar Standard: 2-3 Bar | 2.5-3 Bar |
| Fluid Pressure: | N/A | 70-100 Bar |
| Number of coats: | 2 medium coats | 1 Light Dry + 1 full coats |
| Flash-off between coats: | 10-25 mins minimum at 20°C | 2 mins minimum at 20°C |
| Drying: | Air dry | Air dry |
| Wet Film Thickness: | 100-125 microns | 100-125 microns |
| Dry Film Thickness: | 40-50 microns | 40-50 microns |
Please see the Product Data Sheet for detailed Application Instructions before use.
Note: Please see the Product Data Sheet for detailed information.
| Drying Times 20°C | |
|---|---|
| Dust Free | 10-15 min |
| Touch Free | 4-5 hours |
| Handleable | 24 hours |
| Hard Dry | 48 hours |
| Overcoating time | Minimum: 24 hours Maximum: 7 days without sanding on clean surface with itself |
Please Note: Lower temperature or film thickness higher than 50µm will extend drying times. The drying times quoted are approximate times and will vary depending on drying conditions and film thickness. Poor ventilation, temperature below 20°C, humidity above 85% RH and excessive film thickness will extend the drying times | |
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Selemix 8-863 1K WB Synthetic Hydro-Thinnable Gloss Topcoat is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
We no longer stock this product, but can recommend Selemix 8-110/8-111 systems as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113...
