HMG Thinner 2611
HMG Thinner 2611 is a medium thinner.For use with compatible HMG systems.More Information Delivery Info
HMG D66 Economy Line is an alkyd based synthetic enamel designed for general purpose brush and spray requirements. It is also oil and diesel resistant making it a good choice for agricultural, appliance & machinery finishes.
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
HMG D66 Economy Line is an alkyd based synthetic enamel designed for general purpose brush and spray requirements. It is also oil and diesel resistant making it a good choice for agricultural, appliance & machinery finishes.
Technical Data | |
---|---|
Volume Solids: | 56.8% |
VOC Content: | 0.445kgs/ltr |
SG: | - |
Viscosity: | 240 mPas |
Density: | 1.029 g/cm³ |
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. |
Shelf Life: | 12 months from delivery date in original sealed containers. |
Flash Point: | 31°C |
Product Data | |||
---|---|---|---|
Dry Film Thickness | Wet Film Thickness | ||
Brush: | 50 µm | 100 µm | |
Compliant Spray Gun: | 50 µm | 100 µm |
Coverage: 10 square metres per litre @ 50 microns dft.
Drying Times At 20°C | |
---|---|
Touch Dry: | 1 - 2 hours |
Dry To Handle: | 4 hours |
Dry To Recoat: | After 24 hours |
Fully Cured: | 24 hours |
Technical Data | |||||
---|---|---|---|---|---|
Brush | Compliant Spray Gun | ||||
Mixing Ratio: | Base: 10 | Base: 10 | |||
Thinner: up to 0.5 | Thinner: Up to 1 | ||||
Thinner Options: | Thinner 2611 | Thinner 2611 | |||
Thinner 2612 | Thinner 2612 | ||||
Viscosity: | - | - | |||
Number Of Coats (Guide Only): | 2 coats | 2 full coats | |||
Flash Off: | - | 30 minutes between coats |
For futher information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or
Information on basic physical and chemical properties | |
---|---|
Form: | Liquid |
Colour: | According to product specification. |
Odour: | Characteristic |
Odour Threshold: | Not determined |
pH-value: | Not determined |
Change in Condition | |
Melting point/freezing point: | Undetermined |
Initial boiling point and boiling range: | 135°C |
Flash Point: | 31°C |
Flammability (solid, gas): | Not applicable |
Ignition temperature: | 200°C |
Decomposition temperature: | Not determined. |
Auto-ignition temperature: | Product is not selfigniting |
Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." |
Explosion limits: Lower: | 0.6 Vol % |
Explosion limits: Upper: | 7.0 Vol % |
Vapour pressure at 20°C: | Not determind |
Density at 20°C: | 1.029 g/cm³ |
Relative density: | Not determind |
Vapour density: | Not determind |
Evaporation rate: | Not determind |
Solubility in / Miscibility with water: | NOT MISCIBLE |
Partition coefficient: n-octanol/water: | Not determined |
Viscosity: Dynamic at 20°C: | 240 mPas |
Viscosity: Kinematic: | Not determined |
Solvent content: Organic solvents: | 0.7% |
Solids content: | 56.8% |
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
HMG D66 Economy Line is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG Thinner 2611 is a medium thinner.For use with compatible HMG systems.More Information Delivery Info
HMG Thinner 2612 is a slow thinner.For use with compatible HMG systems.More Information Delivery Info
HMG D66 Economy Line Aerosol is a high quality Synthetic Alkyd Enamel aerosol. It offers good through drying and outstanding film hardness and toughness. This product has also been designed to be “Ready for Use”, for the non-aerosol version of this product please see HMG D66 Economy Line.400ml/16oz Aerosol Available in packs of 1 or packs...
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...