Hempadur MIO 47950 is a two-component polyamide adduct cured, high build epoxy paint which combines a relatively high volume solids content with a short drying time. Has a high load of MIO-pigment.
For professional use only
For use as an intermediate or finishing coat in epoxy systems in atmospheric exposure
Service temperature: up to 140°C (dry exposure)
Colour stability may be affected by exposure to harsh chemical and/or high temperatures
Please note: colours shown are merely an illustration and are not representitive of the final product
Hempadur Mio 47950 is a two-component polyamide adduct cured, high build epoxy paint which combines a relatively high volume solids content with a short drying time. Has a high load of MIO-pigment.
Two-component polyamide adduct cured, high build epoxy paint
Combines a relatively high volume solids content with a short drying time
High load of MIO-pigment
Intermediate or finishing coat for epoxy systems in atmospheric exposure
Service temperature: up to 140°C (dry exposure)
For new build, maintenance and repair
Apply with brush/roller or airless spray. Nozzle pressure: 225 bar [3300 psi] Nozzle orifice: 0.019-0.021"
If brush or roller application is used, more coats will be necessary to achieve the specified dry film thickness. Spray data are indicative and subject to adjustment. Pressure is for a material temperature of 20°C
Product may be specified in another film thickness than indicated depending on purpose and area of use. This will alter spreading rate, drying and curing time and overcoating interval. For best performance, avoid excessive film thickness.
Epoxy coats have an inherent tendency of chalking in outdoor exposure. This does not affect the performance of the coating.
Overcoating
Hempel’s specification supersedes any guidelines indicated in the overcoating table. Overcoating times are indicative for products of the same generic chemistry.
Previous coat: According to Hempel’s Specification. Recommended products are: Hempadur ZP 47940
Subsequent coat: None or according to Hempel’s specification. Recommended products are: Hempathane
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Hempel Hempadur MIO 47950 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Hempel's Thinner 08450 is a general purpose thinner for Hempadur qualities.For paint to be applied in a low film thickness (for instance as a "sealer coat") or if the paint has become too thick, e.g. in cold weather Tools can usually be cleaned with the thinner prescribed for the productMore Information Delivery Info
Hempel Hempathane HS 55610 is a glossy polyurethane topcoat, cured with aliphatic isocyanate. The product has good gloss and colour retention and contains zinc phosphate.For professional use only Recommended as VOC compliant, highbuild finishing coat for protection of structural steel in severely corrosive environment, and may be...
Hempadur ZP 47940 is a two-component polyamide adduct cured, high build epoxy paint which combines a relatively high volume solids content with a short drying time. Pigmented with zincphosphate.For professional use only For use as a primer in epoxy systems in atmospheric exposure Service temperature: up to 140°C (dry exposure)More...
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...
Hempel Tool Cleaner 99610 is a blend of strong solvents for cleaning of tools that have been used for mixing or application of two-component epoxy products.Better cleaning properties than epoxy thinners, and does not contain chlorinated solvent For cleaning of brushes, paint rollers, spray equipment, and other tools which have been used...