Zanders Walls, Doors & Trim
  • Zanders Walls, Doors & Trim

Zanders Walls, Doors & Trim

ZAN1001

Zanders Walls, Doors and Trim is a premium quality acrylic based product with an eggshell finish. Suitable for interior wood, metal and plaster and areas of high moisture, such as kitchens and bathrooms. It is formulated with an acrylic resin providing a high quality finish.

  • Also suitable for use on wallboards, concrete, cement rendering, brickwork and blockwork in internal situations
  • Excellent opacity - Non-yellowing - Good durability
  • Mould resistant - Water-based
  • 1,300+ colours available in RAL, NCS, and British Standard shades

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
Colour Group
Size
Finish
£30.19

£36.23 Incl. VAT
Quantity

Description

Zanders Walls, Doors and Trim is a premium quality acrylic based product with an eggshell finish. Suitable for interior wood, metal & plaster and areas of high moisture, such as kitchens & bathrooms. Also suitable for use on wallboards, concrete, cement rendering, brickwork & blockwork in internal situations. It is formulated with an acrylic resin providing a high quality finish with good durability, excellent opacity, coverage & application properties.

1,300+ colours available in RAL, NCS, and British Standard shades.



Quick Links - Click To Jump To Section:




Features & Benefits


  • Premium quality acrylic based product
  • Eggshell finish
  • Suitable for interior wood, metal & plaster and areas of high moisture, such as kitchens & bathrooms
  • Also suitable for use on wallboards, concrete, cement rendering, brickwork & blockwork in internal situations
  • Formulated with an acrylic resin providing a high quality finish
  • Excellent opacity
  • Good durability
  • Excellent adhesion
  • Interior use
  • Good coverage & application properties
  • Non-yellowing
  • Mould resistant
  • 1,300+ colours available in RAL, NCS and British Standard shades



Preparation


  • Ensure all surfaces to be painted are clean, dry and free from grease and loose or flaking material, or any other contaminants that may impair adhesion
  • Any existing crazed or flaking paint, dirt, grease or other surface contaminants should be removed
  • If your substrate has been previously painted, rub down with a fine waterproof abrasive paper and then rinse thoroughly
  • Please avoid inhaling any sanding dust and always wear a face mask if fine sanding
  • Special precautions should be taken during preparation of pre-1960's paint surfaces over wood and metal as they may contain harmful lead



Application


  • For the best results apply by brush or roller
  • Apply liberally and avoid overspreading
  • Not to be applied below 8°C
  • Seal absorbent surfaces with a coat of Zanders Walls, Doors & Trim thinned up to a maximum of 10% with clean water
  • Prime bare surfaces with a suitable water based primer



Storage


  • Stored unopened in a dry place at temperatures between 5ºC - 25ºC, shelf life is 12 months from the date of manufacture
  • Once you have completed painting ensure you remove as much product as possible from your brush and then clean immediately using warm soapy water
  • If you have any left over product, ensure that you close the tin by replacing the lid firmly and securely and store in a safe place away from heat and flames
  • Protect from frost
  • To avoid the risk of spillage, always store and transport in a secure upright position



Tool Cleaning


  • All equipment must be washed with clean water after use
  • Waste material should not be emptied in the drainage system
  • Some local authorities have special facilities for the disposal of leftover paint
  • Please do not add any product into drains or watercourses
Product Details
ZAN1001

Data sheet

Manufacturer
Wethertex
Interior / Exterior Use
Interior
Water / Solvent Based
Water
For Use On
Concrete, Cement Render, Brickwork,
Application Method
Brush, Roller, Spray
Sheen
Eggshell
Colour
Standard / Ready Mixed
VOC Levels
Ultra-Low (5-49 g/l)
Single, Two or Three Pack
Single
Pack Size
5L
Application
Brush, Roller
Touch Dry (at 20°C)
1 Hour
Dry to Recoat (at 20°C)
2-4 Hours
Fully Cured (at 20°C)
7-10 Days
Coverage
12m² per litre
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

General Painting Application Kit

General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...

Price £8.69
In stock

Wethertex Textured Rollers

Wethertex S.A. Quicklock Textured Roller sleeves and frames for applying products such as Wethertex HBS Flex-Coat Hi-Build Coating. Choose from individual 7" and 10" roller sleeves and frames, or sets from the menu below. More Information Wethertex 2021 Brochure **Available for delivery - see Delivery Options below**

Price £9.19
In stock