Keim Ecosil Grund
Keim Ecosil Grund is a silicate-based primer coat, used as an internal base coat to equalise different absorbencies on repaired or filled surfaces.
- Equalises surface
- Levels surfaces
- Good adhesion
This product is available as POA. Click here to email us for more information
Keim Ecosil Grund is a silicate-based primer coat for interior use. Used as a base coat to equalise different absorbencies on repaired or filled surfaces, as well as a base coat for use on plasterboard and sound previously painted surfaces.
Top Features & Benefits
- Equalises surface.
- Levels surfaces.
- Good adhesion.
- For internal use.
- Specific Weight 1.370g/cm3.
- Resistance to vapour diffusion sd = 0.03m.
- Degree of glossiness matt.
Preparation & Application
All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, decoration using Keim Mineral Paints may proceed. Highly absorbent or friable substrates should firstly be treated with Keim Granital Dilution.
Keim Ecosil Grund can be applied by brush or roller undiluted. Leave for at least 5 hours before over-coating with Keim interior paints.
Ambient and substrate temperature above 5°C and below 30°C.
Approx. 0.2 lt/m² Keim Ecosil Grund. Consumption rates are offered for guideline purposes only and are quoted for smooth surfaces. Actual rates are the responsibility of the applicator. Project specifications should be referred to for specific rates.
Cleaning of Tools
Clean tools with water immediately after use.
- Interior / Exterior Use
- For Use On
- Application Method
- Brush, Roller
- Standard / Ready Mixed
- Pack Size
- 5L, 15L
Be the first to ask a question about this product!