HMG Thinner 2681
HMG Thinner 2671 is a thinner designed for using compatible HMG Flexithane. .Specially formulated for use in Flexithane.More Information Delivery Info
£50.34 (incl. VAT)
£41.95 (ex. VAT)
HMG Flexithane is a highly flexible polyurethane semi-gloss coating with excellent adhesion properties on difficult substrates such as PVC, PU elastomer, rubber variants, fabrics, leather.
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
HMG Flexithane is a highly flexible polyurethane semi-gloss coating with excellent adhesion properties on difficult substrates such as PVC, PU elastomer, rubber variants, fabrics, leather.
Flexithane can be cross-linked with isocyanate HMG Hardener 9002, (using 10% by volume of hardener before thinning). The hardener is supplied separately and added immediately prior to using the paint. The pot life once the hardener is added is 8 hours.
Flexithane is supplied as a semi-gloss finish only.
Technical Data | |
---|---|
Volume Solids: | 56.0% |
VOC Content: | 0.8kgs/ltr |
SG: | - |
Viscosity: | - |
Density: | - |
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. |
Shelf Life: | 12 months from delivery date in original sealed containers. |
Flash Point: | 4°C |
Product Data | |||
---|---|---|---|
Dry Film Thickness | Wet Film Thickness | ||
HVLP: | 15 μm | 50 μm | |
Gravity Gun: | 15 μm | 50 μm | |
Roller: | 15 μm | 50 μm | |
Brush: | 15 μm | 50 μm |
Coverage: 20 square metres per litre @ 15 microns dft (Theoretical)
Drying Times At 20°C | |
---|---|
Touch Dry: | 5 minutes |
Dry To Handle: | 20 minutes |
Dry To Recoat: | At any stage of dry. |
Fully Cured: | 1 hour |
Technical Data | |||||
---|---|---|---|---|---|
HVLP | Gravity Gun | ||||
Mixing Ratio: | Base: 1 | Base: 1 | |||
Thinner: 15% approx | Thinner: 15% approx | ||||
Thinner Options: | Thinner 2681 | Thinner 2681 | |||
- | - | ||||
Viscosity: | - | - | |||
Spray Gun Setup: | - | - | |||
Number Of Coats (Guide Only): | 2 full coats | 2 full coats | |||
Flash Off: | 10 minutes | 10 minutes |
For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]
Information on basic physical and chemical properties | |
---|---|
Form: | Liquid |
Colour: | According to product specification |
Odour: | Characteristic |
Odour Threshold: | Not determined |
pH-value: | Not determined |
Change in Condition | |
Melting point/freezing point: | Undetermined |
Initial boiling point and boiling range: | 82°C |
Flash Point: | 4°C |
Flammability (solid, gas): | Not applicable |
Ignition temperature: | 425°C |
Decomposition temperature: | Not determined. |
Auto-ignition temperature: | Product is not selfigniting |
Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." |
Explosion limits: Lower: | 1.2 Vol % |
Explosion limits: Upper: | 12.0 Vol % |
Vapour pressure at 20°C: | 43 hPa |
Density at 20°C: | Not determined |
Relative density: | Not determined |
Vapour density: | Not determined |
Evaporation rate: | Not determined |
Solubility in / Miscibility with water: | NOT MISCIBLE |
Partition coefficient: n-octanol/water: | Not determined |
Viscosity: Dynamic at 20°C: | Not determined |
Viscosity: Kinematic: | Not determined |
Solvent content: Organic solvents: | 56.0% |
Solids content: | - |
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Gareth on 2021-06-19 20:45:41 | Question: Would this paint be suitable to use on the tubes of am inflatable Rib boat? The material is Hypalon |
Answer from Rawlins’ Technical Team: Assuming the rib tubes are clean, dry, sound and prepared as detailed in the Technical data sheet we can recommend Technispray Hypakolor for this specific application. | |
HMG Flexithane is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG Thinner 2671 is a thinner designed for using compatible HMG Flexithane. .Specially formulated for use in Flexithane.More Information Delivery Info
£50.34 (incl. VAT)
£41.95 (ex. VAT)
HMG Hardener 9002 is a 2k isocyanate hardener. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:2-Pack System DetailsBase (Part 1) HMG SuperthaneHMG SupersheenThinner (Part 2) HMG Hardener 9002Part two of a two-pack systemProfessional...
£12.10 (incl. VAT)
£10.08 (ex. VAT)