HMG Multi Surface Topcoat

Reference TOPMS

Search ID HMG4418

HMG Multi Surface Topcoat is a twin pack polyurethane finish coat offering superior adhesion, durability and hardness for a variety of substrates.
Easy to use over Brass, Copper, Stainless Steel, Zintec, Mild Steel, Aluminium, Anodized Aluminium, Glass Fibre, Glass, Perspex, Foamex, Plastic, Kevlar, and Galvanised Steel.

This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:

2-Pack System Details
Base (Part 1)	HMG 2K Multi Surface Topcoat
Hardener (Part 2)	HMG Hardener 9004 Standard

For Professional use
Quick drying, touch dry in 20 minutes, recoat after 30mins at 20⁰C
Hard dry in 2-3 hours at 20⁰C
Compliant or pressure pot spray application
Available in gloss, matt and satin finish
Can be used as an in-mould coating
Available in 3,500 colours from RAL, NCS, and British Standard

Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.

Coverage Calculator

Product customisation

Don't forget to save your customization to be able to add to cart

Colour Group

Size

Finish

£104.45(ex. VAT)

£125.34 (inc. VAT)

Quantity

Please choose your colour

Available for Delivery (See Delivery Options Below)

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

Description

Features & Benefits

Available in 3,500 colours from RAL, NCS, and British Standard
For professional use
This product MUST be purchased/used in conjuction with its manufacturer specified hardener: HMG Hardener 9004
Coverage: 8–10m²/L at 50 microns WFT
Available in gloss, satin and matt finishes
Drying time at 20°C:

Touch dry: 15-20 mins

Hard dry: 2-3 hours

Full dry: 7 days

Wet film (WFT): 50-100 microns
Dry film (DFT): 25-50 microns
Pot life: 8 hours at 20°C
Manufactured under the auspices of an ISO 9001 management system

Product Information

Suggested primer: HMG Hydroprime Epoxy
Hardener: HMG 9004 Please note - product must be used with this
Suggested thinner: HMG 2602
Thinning:

Compliant spray up to 5%
Pressure pot up to 5%

Number of coats:

Compliant 1-2 coats
Pressure pot 1-2 coats

Spray gun setup:

Compliant 1.6 - 1.8
Pressure Pot 1.2 - 1.4

Mixing ratio:

Gloss - 5:1
Satin - 8:1
Matt - 9:1

Flashpoint: 26°C
Maximum VOC (RFU): 470g/L
Flash off: 10 mins

Substrates

HMG Multi Surface Topcoat is suitable as a primer coat for suitably prepared metals, clean and free of grease, oils and other contaminants
Not suitable for coating over bitumen or chlorinated rubber coatings

Application Climate

Substrate temperature should be 5⁰C or above for application and during cure, and a minimum of 3⁰C above the dew point
Adequate dry air ventilation should be supplied during drying

Application Information

Thinning should only take place after material is thoroughly mixed
Application and use should always conform with the codes of practice described in BS 6150 and BS 5493

Surface Preparation

Ensure surfaces are clean, dry and free from grease, oils, dust and other contamination prior to application
Thoroughly clean and degrease using suitable HMG Prep Clean 2802, HMG 2803 or HMG 2804
Rust/corrosion to be removed to Sa or St standards, remove to clean metallic appearance with little or no rust/corrosion present
Areas where blast cleaning is not cost effective or practical, then the use of HMG Ferrozinc is an alternative
Though Ferrozinc is not an equivalent alternative to shot blasting, it does offer a far superior performance than conventional coatings applied to slightly rusted surfaces
FERROZINC is used after simple wire brushing to remove surface rust, prior to application of primer

Bare Steel Substrates

Aluminium: Abrade with P180 – P320, degrease with suitable HMG Prep Clean prior to application of primer
Mild Steel: Remove millscale and thoroughly degrease using suitable HMG Prep Clean

Abrade with P80 – P180 if necessary, prior to application of primer

Shot Blasted Steel: Remove all traces of blast grit/sand prior to application of primer
Galvanised Steel: Degrease with suitable HMG Prep Clean, apply HMG Mordant Wash, apply HMG Etch Primer and if required HMG Primer

Previously Painted Surfaces

High pressure wash to remove all loose debris and poorly adhered previous coatings to remove all salts and other contaminants
Degrease using suitable HMG Prep Clean 2800 to remove grease and oils not removed with pressure washing alone
Existing coatings to be well adhered with all edges tight and well feathered
Rust/corrosion to be removed back to clean metallic appearance
In areas where complete removal or spot rust remains apply HMG Ferrozinc
Abrade to provide good adhesion
Wipe over with degreaser to remove loose debris from abrasion
Substrate to be clean, free of grease, oils, dust and completely dry prior to application

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information.

Health and Safety

Refer to safety data sheet (see section above) and tin label prior to use
Suitable respiratory equipment should be worn when spraying
Contaminated rags, spray booth filters or other substrates should be segregated from other chemical waste, soaked with water or disposed of in a non-combustible container with tight fitting lid

Product Details

Reference 4418-827894

Data sheet

Manufacturer: HMG Paints Limited
For Use By: Professional Use
For Use On: Brass
Copper
Stainless Steel
Zintec
Mild Steel
Aluminium
Glass Fibre
Glass
Perspex
Foamex
Plastic
Kevlar
Galvanized Steel
Shot Blasted Steel
Previously Painted Metals
Application Method: Spray
Sheen: Satin
Matt
Gloss
Single, Two or Three Pack: Single Pack
Single, Two or Three Pack: Single
Pack Size: 5L
Mixing Ratio: Base: 5 - Hardener: 1 - Thinner: Up to 5%
Touch Dry (at 20°C): 15 - 20 Mins
Dry to Handle (at 20°C): 2 - 3 Hours
Fully Cured (at 20°C): 7 Days
Pot Life (at 20°C): 8 hours
Coverage: 8-10m²/L at 20 microns dft (Theoretical)
Recommended Thinner/Cleaner: HMG Thinner 2602
Compatible Primers: EpiPrime - Polykote 2K AMC Primer
Solids by Volume: Matt Colours 71.7 % - Matt Colours (contains lead) 66.8 % - Satin Colours 63.5 % - Satin Colours (contains lead) 69.3 % - 2K Multi Surface Gloss Colours 59.7 % - Gloss Colours (contains lead) 58.9 %
VOC: 0.470kgs/ltr
Shelf Life (from date of manufacture): 12 months from delivery date in original sealed containers
Size: 5L
Recommended Dry Film Thickness: 25 - 50 μm
Recommended Wet Film Thickness: 50 - 100 μm
UN Number: UN1263
Colour(s): Fully Tintable
Base Type: Polyurethane
Base Type: Solvent-Based
Suitable For Use On: Plastic
Suitable For Use On: Zintec
Suitable For Use On: Stainless Steel
Suitable For Use On: Perspex
Suitable For Use On: Glass
Suitable For Use On: Kevlar
Suitable For Use On: Mild Steel
Suitable For Use On: Brass
Suitable For Use On: Aluminium
Suitable For Use On: Glass Fibre
Suitable For Use On: Galvanised Steel
Suitable For Use On: Foamex
Suitable For Use On: Copper
Suitable For Use On: Previously Painted Metals
Suitable For Use On: Shot Blasted Steel
Finish: Satin
Finish: Matt
Finish: Gloss
Application Method: Spray
Manufacturer: HMG Paints LTD
Usages: Metal Protectors
Usages: Quick Drying
Product Type: Topcoat
Product Type: Metal Protection
Product Type: Metal Topcoat
Colour Family: Orange
Colour Family: Beige
Colour Family: Yellow
Colour Family: Green
Colour Family: White
Colour Family: Red
Colour Family: Pink
Colour Family: Purple
Colour Family: Grey
Colour Family: Black
Colour Family: Blue
Colour Family: Neutral
Colour Family: Brown

Attachments

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Send us your question

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

HMG Multi Surface Topcoat is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT

General Painting Application Kit

General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...

£8.02 (ex. VAT)

Shop now