Mathys Paracem Universal

    895.1.1

    We no longer stock this product, but can recommend Zinsser AllCoat Exterior Matt (Water Based) as a great alternative.

    Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.

    Mathys Paracem Universal is a covering universal paint for outside work. Extremely suitable for durable decoration of woodwork, metal, bricks, plastic, concrete and more. New or already painted. Paracem Universal is water-vapour permeable, water repellent, and requires minimum maintenance. Self-priming in most cases. Protects dry coating against contamination by mould. Paracem® Universal has a unique property, namely, the colour does not darken when the façade is wet.

    • Usable on all surfaces, such as bricks, gutters, wood, aluminium
    • Colour and weatherproof for long-term protection
    • Protection of the dried coat against contamination by mould
    • Primer and finishing coat in one

    Product customisation

    Don't forget to save your customization to be able to add to cart
    • 250 char. max
    Quantity
    Product not available
    This Product has been Discontinued

    Description

    Mathys Paracem Universal is a covering universal paint for outside work. Extremely suitable for durable decoration of woodwork, metal, bricks, plastic, concrete and more. New or already painted. Paracem® Universal is water-vapour permeable, water repellent, and requires minimum maintenance. Self-priming in most cases. Protects dry coating against contamination by mould. Paracem® Universal has a unique property, namely, the colour does not darken when the façade is wet.



    Recommended Use:

    • Developed for all outside work, Paracem Universal is ideal for applying to bricks, façade cladding, plaster, woodwork, plastic, galvanised metal, steel, concrete, and more. Paracem Universal is self-priming and will immediately adhere to existing glossy surfaces without the need for sanding. A separate primer is unnecessary for most applications. Paracem Universal provides excellent resistance against cracking, blistering, flaking, rain,and severe weather conditions.
    • Two-layer system: Apply the first layer, which primes and seals the surface. The second layer completes the sealing process and provides additional moisture resistance and protection.



    Click To Jump To Section:




    Features & Benefits


    • Matt universal paint for the outdoors
    • Usable on all surfaces, such as bricks, gutters, wood, aluminium
    • Colour and weatherproof for long-term protection
    • Protection of the dried coat against contamination by mould
    • Primer and finishing coat in one
    • Water-vapour permeable
    • Quick drying, recoatable in 1 hour



    Product Specification


    Technical Data
    Mathys Paracem Universal
    Volume Solids:40%
    Solids Content In Weight:40%%
    Water Vapour Permeability:Sd = 0,41 m
    VOC Content:35 g/l
    Gloss Level:Matt
    Gloss level at t 60º:± 2%
    Gloss level at 85º:± 3%
    Viscosity:Dynamic (room temperature): 1700 mPa·s
    Density:1,28
    Storage Conditions:Store indoors.
    Shelf Life:2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5 and 35°C.
    Flash Point:Product does not sustain combustion.



    Film Thickness Range And Coverage


    Product Data
     Dry Film ThicknessWet Film Thickness
    Brush:40 µm per coat100 µm per coat
    Roller:40 µm per coat100 µm per coat
    Airless Spray:40 µm per coat100 µm per coat



    Theoretical Coverage:

    • 8-12 m²/l/coat

    Practical Coverage:

    • Practical coverage depends on many factors such as porosity and roughness of the substrate. A normal application consists of two layers. Apply an extra layer to areas with high exposure such as window sills and eaves.



    Drying Times


    Drying Times at 20°C
    Touch Dry:1 hour
    Dry To Handle:1 hour
    Dry To Recoat:1 hour
    Fully Cured:7 days



    Surface Preparation




    Application Methods


    Technical Data
    Application Conditions:> 10°C, < 85% R.H.
    Application & Thinning: BrushApply with brush with synthetic bristles
    Application & Thinning: RollerApply with synthetic roller
    Application & Thinning: Airless SprayNozzle: 0.017 / Pressure: 140 - 170 bar
    Cleaning of Equipment/SpillsUse lukewarm soapy water to clean off stains and materials



    • Paracem Universal is not recommended for use on floors, terraces, or horizontal surfaces that may be drenched in water or exposed to water for a long period of time. Before applying Paracem Universal, we recommend that you thoroughly sand and degrease unweathered/new powder coatings and similar surfaces. Not suitable for application onto new plastisol or a new powder coating. These surfaces must be fully weathered. Paracem Universal has no anti corrosive properties, so don’t apply directly on ferrous metal surfaces, but always use an appropriate anticorrosive primer like Rust-Oleum Mathys Metal Cladding Primer.



    Product Notes


    Information On Basic Physical And Chemical Properties
    Mathys Paracem Universal
    Information on basic physical and chemical properties. Colour:Various
    Physical StateLiquid
    Odour:Not available
    Odour Threshold:Not available
    pH-value:7,5
    Melting point/freezing point:0°C
    Initial boiling point and boiling range:>100°C
    Flash Point:Product does not sustain combustion
    Evaporation rate:<1 (butyl acetate = 1)
    Flammability (solid, gas):Non-flammable in the presence of the following materials or conditions: open flames, sparks and static discharge, heat and shocks and mechanical impacts. Non-flammable but will burn on prolonged exposure to flame or high temperature.
    Explosion limits: Lower:Not available
    Explosion limits: Upper:Not available
    Vapour pressure at 20°C:Not available.
    Vapour density:>1 [Air = 1]
    Relative density:1,28
    Solubility(ies):Soluble in the following materials: cold water and hot water. Very slightly soluble in the following materials: methanol and acetone.
    Partition coefficient: n-octanol/water:Not available
    Auto-ignition temperature (°C):Not available
    Decomposition temperature (°C):Not available
    Viscosity:Dynamic (room temperature): 1700 mPa·s
    Explosive properties:Non-explosive in the presence of the following materials or conditions: open flames, sparks and static discharge and heat. No unusual hazard if involved in a fire.
    Oxidising properties:Not available



    Health & Safety


    • For further instructions please see the safety data sheet in the attachments section above.

    Click to go back to the top of the page

    Product Details
    895.1.1

    Data sheet

    Manufacturer
    Mathys
    Water / Solvent Based
    Water
    For Use On
    Brickwork, Cladding, Plaster, Woodwork, Plastic, Galvanized Metal, Steel, Concrete
    Application Method
    Brush, Roller, Airless Spray
    Sheen
    Matt
    Colour
    Standard / Ready Mixed, Fully Tintable
    VOC Levels
    Ultra-Low (5-49 g/l)
    Single, Two or Three Pack
    Single
    Pack Size
    1L, 4L, 10L
    Suitable Substrates
    Pre-painted, PVC, brickwork, mineral substrates, plaster, pre-painted, new wood trim/doors, plywood, wood panelling/laminates.
    Key Features
    1-component, Primer, Quick drying, Tintable, Topcoat, Water-based
    Touch Dry (at 20°C)
    1 hour
    Dry to Recoat (at 20°C)
    1 hour
    Fully Cured (at 20°C)
    7 days
    VOC
    35 g/l
    Size
    1 L, 4 L, 10 L
    Recommended Dry Film Thickness
    40 µm per coat
    Recommended Wet Film Thickness
    100 µm per coat
    UN Number
    UN3082
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Mathys Paracem Universal is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    Rust-Oleum Mathys ND14 Cleaner Degreaser

    Rust-Oleum Mathys Alkaline Cleaner/Degreaser ND14 should be used to remove grease, oil, proteins, dirt and many other surface contaminants from coated, mineral and steel substrates.Non-flammable, virtually odour-free cleaning/degreasing solution. Can be used as an additive for high pressure and steam cleaning Applied by synthetic sponge,...

    Price £74.82 (ex. VAT)
    In Stock and Available for Delivery

    Rust-Oleum Mathys AMW Fungicidal Wash

    We no longer stock this product, but can recommend Torkill W Fungicidal Solution as a great alternative.

    In stock

    Rust-Oleum Mathys Metal Cladding Primer

    Rust-Oleum Mathys Metal Cladding Primer is a water based primer specially designed for application on weathered metal cladding to provide a perfect base for Rust-Oleum Mathys Metal Cladding Topcoat, also suitable for bare or blasted steel, galvanized steel, zinc and aluminium.Single pack anti-corrosion primer Can be overcoated after just...

    Price £148.73 (ex. VAT)
    In Stock and Available for Delivery

    General Painting Application Kit

    General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...

    Price £10.03 (ex. VAT)
    In Stock and Available for Delivery