Mathys Paracem Deco Nature Satin NF

    836.1NF.10

    We no longer stock this product, but can recommend Zinsser Perma-White Interior as a great alternative.

    Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.

    Mathys Paracem Deco Nature Satin NF is a waterborne acrylic paint for high-quality indoor works. Decorative and satin finishing for indoor walls and ceilings. Applicable on most substrates (plaster, bricks, concrete, etc.) as well in private as in public buildings. With European Ecolabel. The best paint for you and for nature.

    • Excellent flow
    • Excellent mechanical resistance against rubbing
    • Smooth satin matt aspect
    • Closed coating structure
    • High covering power

    Product customisation

    Don't forget to save your customization to be able to add to cart
    • 250 char. max
    Quantity
    Product not available
    This Product has been Discontinued

    Description

    Mathys Paracem Deco Nature Satin NF is a waterborne acrylic paint for high-quality indoor works. Decorative and satin finishing for indoor walls and ceilings. Applicable on most substrates (plaster, bricks, concrete, etc.) as well in private as in public buildings. With European Ecolabel. The best paint for you and for nature.



    Recommended Use:

    • Decorative and satin matt finishing for indoor walls and ceilings. Applicable on most substrates (plaster, bricks, concrete, etc.) in residential and public buildings.



    Click To Jump To Section:




    Features & Benefits


    • Excellent flow
    • Excellent mechanical resistance against rubbing
    • Smooth satin matt aspect
    • Closed coating structure
    • High covering power



    Product Specification


    Technical Data
    Mathys Paracem Deco Nature Satin NF
    Volume Solids:42 - 46%
    Solids Content in weight:57 - 61%
    VOC Content:Max. 0.5 g/l
    Gloss Level:Satin
    Viscosity:Not available
    Density:1,36/td>
    Storage Conditions:Store indoors
    Shelf Life:2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5 and 35°C.
    Flash Point:Not flammable



    Film Thickness Range And Coverage


    Product Data
     Dry Film ThicknessWet Film Thickness
    Brush:n/an/a
    Roller:n/an/a
    Airless Spray:n/an/a



    Theoretical Coverage:

    • 10 - 12 m²/l per coat, 2 coats recommended.

    Practical Coverage:

    • Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application (see DIN 53220).



    Drying Times


    Drying Times at 20°C
    Touch Dry:1 hour
    Dry To Recoat:6 - 8 hours



    Surface Preparation


    • Old cleaned layers in good condition and light porous substrates may be coated directly with Paracem Deco Nature. Very porous substrates, smooth plaster and waterresistant plasterboard are to be impregnated first with Paracem Deco Nature Primer.



    Application Methods


    Technical Data
    Application Conditions:Dry and clean substrates, minimum 10°C.
    Application & Thinning: BrushApply undiluted
    Application & Thinning: RollerApply undiluted.
    Application & Thinning: Airless SprayNozzle: 9 - 11 / Pressure: 200 bars, dilute with maximum 3% volume water.
    Cleaning of Equipment/SpillsWater.



    • When the product is tinted the Ecolabel does not apply anymore. (Adding colorants increases the VOC level).



    Product Notes


    Information On Basic Physical And Chemical Properties
    Mathys Paracem Deco Nature Satin NFMathys Paracem Deco Nature Satin NF (Base)
    Information on basic physical and chemical properties. Colour:WhiteVarious
    Physical StateViscous liquidViscous liquid
    Odour:Not availableNot available
    Odour Threshold:Not availableNot available
    pH-value:8 to 98 to 9
    Melting point/freezing point:0°C0°C
    Initial boiling point and boiling range:>100°C>100°C
    Flash Point:Closed cup: Not applicable. [Product does not sustain combustion.]Closed cup: Not applicable. [Product does not sustain combustion.]
    Evaporation rate:<1 (butyl acetate = 1)<1 (butyl acetate = 1)
    Flammability (solid, gas):Non-flammable in the presence of the following materials or conditions: open flames, sparks and static discharge, heat and shocks and mechanical impacts. Nonflammable, but will burn on prolonged exposure to flame or high temperature.Non-flammable in the presence of the following materials or conditions: open flames, sparks and static discharge, heat and shocks and mechanical impacts. Nonflammable, but will burn on prolonged exposure to flame or high temperature.
    Explosion limits: Lower:Not availableNot available
    Explosion limits: Upper:Not availableNot available
    Vapour pressure at 20°C:2,3 kPa [room temperature]2,3 kPa [room temperature]
    Vapour density:>1 [Air = 1]>1 [Air = 1]
    Relative density:1.36 to 1.371,36
    Solubility(ies):Soluble in the following materials: cold water and hot water. Very slightly soluble in the following materials: methanol and acetone.Soluble in the following materials: cold water and hot water. Very slightly soluble in the following materials: methanol and acetone.
    Partition coefficient: n-octanol/water:Not availableNot available
    Auto-ignition temperature (°C):Not availableNot available
    Decomposition temperature (°C):Not availableNot available
    Viscosity:Not availableNot available
    Explosive properties:Not applicable.Not applicable.
    Oxidising properties:Not availableNot applicable.



    Health & Safety


    • For further instructions please see the safety data sheet in the attachments section above.

    Click to go back to the top of the page

    Product Details
    836.1NF.10

    Data sheet

    Manufacturer
    Rust-Oleum
    Interior / Exterior Use
    Interior
    Water / Solvent Based
    Water
    For Use On
    Plaster, Brickwork, Concrete
    Application Method
    Airless Spray, Brush, Roller
    Sheen
    Satin
    Colour
    Standard / Ready Mixed, Fully Tintable
    Pack Size
    5L,10L
    Key Features
    Tintable, Topcoat, Water-based
    Coverage
    10 - 12 m²/l per coat, 2 coats recommended
    Density
    1,36
    Solids by Volume
    42 - 46%
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Mathys Paracem Deco Nature Satin NF is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    General Painting Application Kit

    General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...

    Price £10.03 (ex. VAT)
    In Stock and Available for Delivery

    Mathys Paracem Deco Nature Primer NF

    We no longer stock this product, but can recommend Zinsser Bulls Eye 1-2-3 as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450...

    In stock