Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.
Mathys Cachemire Laque Mate is a high quality mat lacquer in a polyurethane-alkaline emulsion based water solution. Recommended for works requiring high quality definition.
Surprising matte appearance
Exceptionally smooth dry film
Easy to apply
Withstands rubbing
Little odour and low VOC content
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cart
Mathys Cachemire Laque Mate is a high quality mat lacquer in a polyurethane-alkaline emulsion based water solution. Recommended for works requiring high quality definition.
2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 10 and 35°C.
Flash Point:
Product does not sustain combustion
Product Notes
Information On Basic Physical And Chemical Properties
Mathys Cachemire Laque Mate
Colour:
Various
Physical State
Liquid
Odour:
Not available
Odour Threshold:
Not available
pH-value:
8 to 9
Melting point/freezing point:
0°C
Initial boiling point and boiling range:
>100°C
Flash Point:
Closed cup: Not applicable. [Product does not sustain combustion.]
Evaporation rate:
<1 (butyl acetate = 1)
Flammability (solid, gas):
Non-flammable in the presence of the following materials or conditions: open flames, sparks and static discharge, heat and shocks and mechanical impacts. Nonflammable, but will burn on prolonged exposure to flame or high temperature.
Explosion limits: Lower:
Not available
Explosion limits: Upper:
Not available
Vapour pressure at 20°C:
2,3 kPa [room temperature]
Vapour density:
>1 [Air = 1]
Relative density:
1,38 to 1,42
Solubility(ies):
Soluble in the following materials: cold water and hot water. Very slightly soluble in the following materials: methanol and acetone.
Partition coefficient:n-octanol/water:
Not available
Auto-ignition temperature (°C):
Not available
Decomposition temperature (°C):
Not available
Viscosity:
Dynamic (room temperature): 1400 mPa·s
Explosive properties:
Not applicable.
Oxidising properties:
Not available
Health & Safety
For further instructions please see the safety data sheet in the attachments section above.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Mathys Cachemire Laque Mate is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...