Zinsser AllCoat (Solvent-Based)
Condition: New product
A 4-in-1 primer, sealer, stain blocker and finish. It is ideally suited to commercial interior applications and offers exceptional sprayability, one coat coverage and virtually odour free application.
Zinsser AllCoat (Solvent-Based) is our ultimate interior refurbishment paint. It is a 4-in-1 primer, sealer, stain blocker and finish. It is ideally suited to commercial interior applications and offers exceptional sprayability, one coat coverage and virtually odour free application.
Zinsser AllCoat (Solvent-Based) is our ultimate airless spray product. Its 4-in-1 formula means exceptional results can be achieved in lightning quick time.
Features and Benefits
- Adheres to all surfaces without sanding
- Covers and seals most paintable surfaces
- Ideal for new plaster and other surfaces with up to 12.5pH
- Sands crisply to powder within 2 hours
- Very low odour
- Tintable to mid tone colours
- Non-yellowing finish
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Typical Coverage (per coat)||9m² per litre|
|Touch Dry||1 hour|
|Application||Brush, Roller, Spray|
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
|Denise on 02/02/2018|
Can I use this paint 2 paint my kitchen units
|Tim Nolan-Dacre on 02/02/2017|
Question: is this product suitable to be used on OSB?
Yes, but for exterior projects we would recommend Zinsser AllCoat Exterior Satin (Solvent Based).
|Bob Davies on 30/11/2016|
Question: What is the drying time and is it a brushable product.
What thinners should be used to clean brushes.
Dry Times (24°C):
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close