Rustins G Shield Electro Smog Shielding Paint is a new generation special carbon coating for reduction of electromagnetic interference (EMI). It is based on a high-quality water-borne, cross-linking acrylic resin containing Natural Exfoliated Graphite to provide reliable shielding from high-frequency electromagnetic fields and low-frequency electrical fields.
Efficient electromagnetic interference reduction properties across a wide frequency range
Environmentally friendly water-based coating
Contains Graphite
For indoor and outdoor use
Breathable, low-emissions, solvent-free
Lasting corrosion resistance, contains no metal
Touch dry in 30 minutes - depending upon the temperature and humidity
Can be applied over all commonly used emulsion paints
Suitable for use in residential and commercial properties, schools and nurseries, hotels, hospitals, laboratories, military facilities, airports and tunnels
Rustins G Shield Electro Smog Shielding Paint is a new generation special carbon coating for reduction of electromagnetic interference (EMI). It is based on a high-quality water-borne, cross-linking acrylic resin containing Natural Exfoliated Graphite to provide reliable shielding from high-frequency electromagnetic fields and low-frequency electrical fields.
Rustins G-Shield is solvent free with low-emissions and has lasting corrosion resistance as the paint contains no metal particles. The carbon in the paint prevents the formation of corrosion on metal surfaces.
G-Shield has incremental shielding attenuation (up to -57 dB for one layer of coating) for the frequency range up to 20 GHz and higher, including the 5G frequency spectrum. The effectiveness of Rustins G-Shield has been tested at NPL, the national measurement standards laboratory for the United Kingdom.
Contains Natural Exfoliated Graphite to provide reliable shielding from high-frequency electromagnetic fields and low-frequency electrical fields
Solvent free with low-emissions
lasting corrosion resistance
Has incremental shielding attenuation (up to -57 dB for one layer of coating) for the frequency range up to 20 GHz and higher, including the 5G frequency spectrum
For indoor and outdoor use
Can be applied over all commonly used emulsion paints
Product Specifications
Technical Data
Rustins G Shield
Shielding Attenuation
Single Layer up to -57 Db, Double Layer up to -70 Db
Thickness of single layer coating
100 um
Coats
Two coats will provide adequate shielding and coverage, but three coats are recommended for improved durability. For walls and ceilings up to three layers of coating are possible
Drying Time
Touch dry in approximately 30 minutes depending upon the temperature and humidity
Re-coating Time
Can be recoated after a minimum of three hours. Protect from rain at least for 24 hours
Application Temperature
Do not apply at temperatures below 10˚C or in conditions of high humidity
Coverage
1 litre will cover approximately 5-6 sq m per coat
Maintenance
Not applicable
Compatibility
Can be applied under all commonly used emulsion paints and underneath clean organic plasters
Settlement
Stir well before use
Shelf Life/Storage
Store in a cool place. Keep away from children. Close container tightly after use and store it in a cool place for no more than 12 months. Protect from frost
Application
The surface must be clean and free from grease and wax
If already painted, remove flaking paint by scraping, remove all rust with a scraper
Stir well before use until there is no sediment in the bottom of the can
Apply liberally with a synthetic fibre bristle brush
Floor coverings can be laid directly on the shielding coverings
When applying large area shielding coatings, grounding with self-adhesive copper strips up to 1 inch wide is recommended
Cleaning
Remove as much paint as possible and return to this container
Brushes should then be cleaned immediately with water
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Rustins G Shield Electro Smog Shielding Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage. Please note, three coats are recommended for this product for best results. Please refer to the Product Data Sheet.