Kolorbond Hypakolor

Tech5749
KOL5749

Kolorbond Hypakolor has been specially developed for surfaces containing rubber or similar flexible materials. The coating bonds with the surface, and appears to improve the integrity of the surface. Applied correctly, the product will not crack, chip, peel, or flake off.

  • Available in 5,000+ colours, inc. RAL Classic, BS, NCS & the new NCS 2050 colours
  • Extreme durability, lightfast finish and abrasion resistance
  • Used on rigid hull inflatable boats, small patrol craft and other inflatable boats used worldwide in military, civil, rescue and patrol applications
  • Made especially to work with flexible rubber based substrates such as Hyperlon and Hyperlast
  • Can be colour matched to nearly any colour (including metallic, pearlescent shades, and Steritouch range), finish and texture
  • Choose smooth or textured options, in matt through to gloss finishes
  • Performance and guarantees not valid without purchase and use of the relevant cleaning products
  • Note: 20L pack size is supplied in 4 x 5L up to orders of 60L, after which supplied in 20L size on pallets

Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
    Your customization:
Colour Group
Size
Finish
Option
£39.00(ex. VAT)
£46.80 (inc. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

Description

Kolorbond Hypakolor has been specially developed for surfaces containing rubber or similar flexible materials. The coating bonds with the surface, and appears to improve the integrity of the surface. Applied correctly, the product will not crack, chip, peel, or flake off. Performance and guarantees not valid without purchase and use of the relevant cleaning products



Quick Links - Click To Jump To Section:




Features & Benefits


  • 490+ RAL and British Standard colours available
  • Specially developed for surfaces containing rubber or similar flexible materials
  • The coating bonds with the surface
  • Improves the integrity of the surface
  • Extreme durability, lightfast finish and abrasion resistance
  • Will not crack, chip, peel, or flake off when applied correctly
  • Easy to apply using a single pack process
  • Bonds to the surface
  • Crafts can be deflated and stored or transported without deterioration
  • Developed with marine craft in mind
  • Used on rigid hull inflatable boats, small patrol craft and other inflatable boats used worldwide in military, civil, rescue and patrol applications
  • Also ideal for use on other rubberised substrates and surfaces such as non-slip flooring, mats etc, due to its colourfast, resilient nature
  • Made especially to work with flexible rubber based substrates such as Hyperlon and Hyperlast
    • Materials commonly used in the inflatable “ribs” and other inshore boats, dinghies etc.
  • Can be colour matched to nearly any colour (including metallic, pearlescent shades, and Steritouch range), finish and texture
  • Choose smooth or textured options, in matt through to gloss finishes
  • Note: 20L pack size is supplied in 4 x 5L up to orders of 60L, after which supplied in 20L size on pallets



Application Instructions


Use Vinylkleen to thoroughly clean the surface that is to be re-coloured.

Vinylkleen will remove dirt, polish, wax, silicones and other surface contamination. Vinylkleen should be applied with a lint free cloth. Rub with 800 wet ‘n dry. Wipe any residual Vinylkleen with a lint free cloth and allow to dry.

Clean with Windowprep and allow to flash off. When removing previous surface coatings, please contact the manufacturer for advice.

Hypakolor can be applied by aerosol and with air or airless spray gun. Suction fed air operated spray guns should be used, at a pressure of approximately 20-30 p.s.i. using a 30 air cap and ex set up.

Always apply to a small test area in the normal way, ensuring the bond has occurred.

Hypakolor can then be applied using approximately two light coats, followed by a heavier coat. Allow 10 - 15 minutes flash off between coats. Remember that the main aim of these light coats is to form a bond. Do not try to cover with each coat or the bond may not take place.

Apply Hypakolor to the substrate until the surface has been evenly re-coloured and the desired thickness has been attained. For heavy use, up to 5 coats can be applied. Some colour changes may need an intermediate coat before the required colour is applied (i.e. red, orange and yellow) depending on the colour of the surface to be coloured.

Use sticky tape to help check this procedure. High humidity and damp conditions will affect drying times, cause poor adhesion and/or a blooming effect. Avoid application in such adverse conditions.

Full curing time is 24 hours at room temperature (16°C) or 50 minutes at 50°C Hypakolor will remain tacky for a short time when it has been exposed to 50°C but will dry off.



Product Details
Tech5749

Data sheet

Manufacturer
Technispray
Interior / Exterior Use
Exterior
Water / Solvent Based
Solvent
For Use On
Rubber
Application Method
Spray, HVLP
Sheen
Satin
Colour
Fully Tintable
Single, Two or Three Pack
Single
Pack Size
400ml Aerosol, 1L, 5L, 20L
Recommended Thinner/Cleaner
Gun Cleaner
Solids by Volume
11.2 (Clear) to 20.0 (depending upon the colour)
VOC
869 +/- 106 grams per litre
Shelf Life (from date of manufacture)
1 Year
Touch Dry
3 - 5 minutes @ 10 microns (dry film thickness)
Recommended Dry Film Thickness
20 - 30 microns
Recommended Wet Film Thickness
175 - 263 microns (Clear) to 98 - 147 microns (Colour)
Specific Gravity
0.98 +/- 0.12 @ 20ºC
Viscosity
11.0 – 17.0 seconds @ 20° C Ford Cup No. 4
Solids by Weight
11.2 (Clear) to 20.0 (depending upon the colour)
Flashpoint
- 3ºC (Measured with Seta Closed Cup)
Oven Cure
50 minutes @ 50°C
Post Cure
24 hours @ ambient temperature (16°C)
Flash Time (Between Coats)
10 - 15 minutes @ ambient temperature (16° C)
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Ben williams on 2022-08-24 21:06:08
Question: 

Hi, i notice you only sell the kolorbond hypakolor in packs of 2 with the 400ml aerosol. Is it possible to have two different colours? (One aerosol in one colour and can two in another colour)

Answer from Rawlins’ Technical Team: 

Unfortunately no, the two cans would have to be the same colour.

questions Gareth  on 2022-01-14 08:44:56
Question: 

What is the approximate m² coverage if applied by brush? Thanks

Answer from Rawlins’ Technical Team: 

This product is for spray application only.


Question about the product

* Required fields
(read)
Send

IMPORTANT SHIPPING & DELIVERY INFORMATION

Kolorbond Hypakolor is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


You might also like

Kolorbond WindowPrep

Kolorbond WindowPrep is an alcohol based cleaner for use on PVCu prior to painting. It is very important that PVCu (uPVC) is cleaned with WindowPrep prior to painting; WindowPrep not only removes contaminants but also removes plasticizers from the surface of the PVCU and, additionally, opens the pores of the PVCu which greatly assists adhesion...

Price £15.00 (ex. VAT)
In Stock and Available for Delivery

Kolorbond VinylKleen

Kolorbond VinylKleen is a water based cleaner for use on PVC and PVCu which removes water soluble contaminants and some silicones and oils. VinylKleen should be the first cleaner used before further cleaning with Kolorbond WindowPrep or Kolorbond VinylPrep. VinylKleen comes in a concentrated form and should be mixed 1 part VinylKleen with 3...

Price £15.00 (ex. VAT)
In Stock and Available for Delivery

Kolorbond VinylPrep

Kolorbond VinylPrep is a solvent based cleaner for use on soft vinyl before spraying with Vinylkote. VinylPrep removes contaminants including polishes and lacquers. The vinyl may feel a little tacky after cleaning with VinylPrep. This will help with the adhesion of the paint. You must always wear gloves when using this product. Take care;...

Price £15.00 (ex. VAT)
In Stock and Available for Delivery