• Blackfriar Multi-Surface Primer

Blackfriar Multi-Surface Primer

BF0440001

Blackfriar Multi-Surface Primer has been specially formulated to prime multiple surfaces prior to further painting. It’s ideal for hard and soft woods, chipboard, plywood, GRP, MDF, exterior UPVC, ceramic tiles, iron, steel, galvanised and non-ferrous metals (aluminium, brass, chrome, copper) and old plaster.

Product Features

  • Interior and exterior use.
  • For multiple surfaces prior to painting.
  • Anti-corrosive protection
  • Contains an anticorrosive pigment to protect iron and steel.
Colour
Size
£25.37
VAT excluded

£30.44 Tax incl.
Quantity

Description

Blackfriar Multi-Surface Primer has been specially formulated to prime multiple surfaces prior to further painting. It’s ideal for hard and soft woods, chipboard, plywood, GRP, MDF, exterior UPVC, ceramic tiles, iron, steel, galvanised and non-ferrous metals (aluminium, brass, chrome, copper) and old plaster.

Preparation

Ensure the surface to be primed is clean, dry, sound and free from wax, grease and oil. If you are preparing wood or plaster, remove loose/ flaking paint, clean to a bare surface and sand smooth. Remove any fungal growth or mould with Blackfriar Concentrated Fungicidal Wash prior to application. Treat any knots or resinous wood with Blackfriar Patent Knotting and allow to dry before applying Blackfriar Multi-Surface Primer. If preparing iron and steel, remove any rust and mill scale with a wire brush, clean back to a bright surface, and prime immediately.

Application

Stir thoroughly before use. Apply one coat of product by brush or roller except on ferrous metals and porous surfaces where two coats are required. For porous surfaces, dilute the first coat with 10% water. If applying two coats lightly sand the first coat prior to applying the second to remove any imperfections. Please note when applying to copper, the primer coat may turn blue - this colour will not be visible once a top coat is applied.

Drying Time

Touch dry in 1 hour. Apply a second coat after 4 hours if required. Drying times will be extended in low temperatures. Not recommended for use in damp conditions or if the temperature is below 10°C.

Clean Up

Remove as much paint as possible fromequipment before cleaning. Clean with warm water, rinse and dry thoroughly.

Storage

Store in a dry, safe place. Do not store in environments where extreme temperatures may occur. Keep within 5-30°C. Do not store in direct sunlight.

Features

  • Interior and exterior use
  • For multiple surfaces prior to painting
  • Anti-corrosive protection

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
BF0440001

Data sheet

Manufacturer
Blackfriar Professional
Manufacturer
Blackfriar
Interior / Exterior Use
Interior and Exterior
Water / Solvent Based
Water
For Use On
Wood, Chipboard, GRP, MDF, uPVC, Ceramic Tiles, Iron, Steel, Aluminium, Brass, Chrome, Copper
Colour
Standard / Ready Mixed
VOC Levels
Ultra-Low (5-49 g/l)
Single, Two or Three Pack
Single
Pack Size
1L, 2.5L
Base Type
Water Based
Dry to Recoat (at 20°C)
4 hours
Coverage
12m² per litre
Recommended Thinner/Cleaner
Water
VOC
30g/litre
Touch Dry
1 Hour
Finish
Matt
UN Number
N/A
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

Blackfriar Concentrated Fungicidal Wash

Blackfriar Concentrated Fungicidal Wash when diluted, produces a solution for killing moulds, algae and other organic growths. Effectively sterilises surfaces prior to decoration. Product Features Kills organic growth on most surfaces. Minimises risk of re-infestation. Excellent coverage. Interior and exterior use. Professional Use...

Price £8.90
In stock

Blackfriar Patent Knotting

Blackfriar Patent Knotting solution seals and prevents seepage from knots and resinous areas on timber. For use on interior and exterior bare or stripped wood. Product Features Interior and exterior use. Seals knots. Prevents seepage. Translucent amber solution. Use only under opaque coatings.

Price £12.24
In stock