Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Coo-Var All Purpose Primer is a general purpose water based primer. Ideal on multisurface substrates or when a 'one solution' product is required. It can be used on plaster, metals and wood and is applied easily.
Product Features
Coo-Var All Purpose Primer is a general purpose water based primer. Ideal on multisurface substrates or when a 'one solution' product is required. It is ideal for use on plaster, metals (including steel, iron, aluminium, copper brass and more) and wood. Low odour and easy application make this a very versatile product.
Surface Preparation
Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates. Bare steel should be free from dust, rust and scale. Blast cleaning to SA 2½ is recommended. If blast cleaning is impractical, mechanical cleaning should be employed as hand cleaning does not clean the steel to the required degree.
Any oil or grease should be removed with CooVar Degreaser before de-rusting. Where blast cleaning is carried out after assembly, special attention must be paid to edges, corners, nuts, bolts, welds etc. Welds should, if necessary be ground and all weld spatter, slag etc. must be removed. New wood should be sanded prior to coating to ensure an adequate "key" is produced.
Application Conditions
Do not paint when temperature will be at or below 7 °C during the painting and drying process. As dictated by normal good painting practice. Care must be taken during application that the temperature is above the dew point to avoid any contamination. In confined spaces, provide adequate ventilation
during application and drying
Subsequent Coat
Any suitable topcoat.
Remarks
Do not paint when temperature will be at or below 7 °C during the painting and drying process.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Bedec Multi Surface Paint is a renowned non-yellowing, water-based paint that resists flaking or peeling because of its outstanding flexibility. ADVANTAGES Low VOC Environmentally friendly Quick drying Micro-porous Low odour No primer/undercoat required Matt, satin or gloss Colour choice
Tor Tormastic Colour Coating, a gloss finish in over 350 colours from RAL and BS for wood, metal and cementitious substrates. Ideal for farm and industrial building renovations Good colour stability Economical - most colours cover with one coat Apply over conventional primers Good coverage up to 12 square metres per litre Apply by...
MagPaint Blackboard Paint creates a writeable blackboard of any shape or size on interior surfaces that is ready for use after 24 hours. Create an area for taking notes and lists or for making drawing surfaces in children's play areas, or use in conjunction with Magnet Paint for a truly magnetic chalkboard. Creates a blackboard of any shape...
SikaTop 10 is a primer based on synthetic resin on styrene acrylic copolymers, with mineral fillers. Part of the Sika EmotionFloor range for cementitiuous substrates and tiles. Particularly for use as primer for SikaDecor 803 Nature, on mineral substrates, cementitious coatings and old ceramic tiles, not suitable for horizontal surfaces....
Remmers iQ-Paint ST was especially developed as a finishing coat for the Remmers iQ-Therm System. Because of its capillary conductivity, high water vapour diffusion capacity and outstanding hiding power, iQ-Paint ST is an ideal finish for the iQ-Therm System. Easy to apply to interior walls, it has excellent hiding and filling power with a...
Thermilate Thermalmix Paint Additive is a revolutionary paint additive that makes almost any paint or coating insulate. It cuts down energy use and reduces heat loss through walls and ceilings, therefore helping to reduce energy bills. Thermilate Thermalmix Paint Additive has been independently tested and scientifically proven to work by world...
Blackfriar Multi-Surface Primer has been specially formulated to prime multiple surfaces prior to further painting. It’s ideal for hard and soft woods, chipboard, plywood, GRP, MDF, exterior UPVC, ceramic tiles, iron, steel, galvanised and non-ferrous metals (aluminium, brass, chrome, copper) and old plaster. Product Features Interior and...
HMG PVC17 Colours is a 1K Vinyl Acrylic with exceptional flexibility and adhesion. HMG PVC 17 is suitable for coating most PVCu, hard plastics (not GRP) and powder-coated surfaces (architectural cladding). If in doubt, a small trial should be carried out in a localised area to ensure adhesion and compatibility with the surface. Highly...
Resuseal Wall Gloss is an aesthetic two-pack, hard-wearing, water-based epoxy wall coating with exemplary adhesion for concrete, wood and other surfaces. ADVANTAGES Hygienic Dust-free Resistant to light chemical attack Low odour Decorative
Paint For Pros Quartz White Primer, a ready-to-use primer to improve adhesion of plaster, specifically MagnetPlaster. Easy to apply One layer provides sufficient strength Contains little to no solvent Meets health and safety requirements for indoor use Tack-free after an hour Ready to plaster over after 12 hours
Zinsser AllCoat Exterior Gloss (Water Based) is the ultimate performance all-surface paint designed for long term decoration and protection. Cracking, blistering and flaking resistant Weather resistant Long lasting finish Easy to apply Excellent colour retention Multi-surface application Anti-fungal degradation Bonds to glossy paint...
Remmers iQ-Fill is a mineral surface filler and fine render used to produce fine, closed render surfaces that are ready for painting in indoor areas and for smoothing iQ Top. When worked properly, very even and smooth surfaces can be produced. The hardened mortar is diffusion-open and water resistant combined with very good capillary...
Tor Matt Black is a general purpose matt finish for blackboards, interior wrought iron work, dark rooms, welding booths etc. See further below for preparation for use on bare wood and previously-painted surfaces. Available in 3 sizes Good coverage - up to 12.5 square metres per litre Apply by brush, roller (short pile) or air spray An...
Keim Ecosil ME is a high performance, environmentally friendly mineral paint for interior use. KEIM Ecosil ME optimises air quality, making use of the MiNox™ effect, using photocatalytic pigments to reduce noxious gases and odours by transforming them into natural substances. Top Features Cleanable in accordance with DIN 53788,...
Keim Optil Grob is a ready to use, filled silica-sol interior paint manufactured in accordance with DIN EN 13 300, which may be used to provide a textured coat on any conventional interior wall and ceiling surface. Top Features With MacroFill technology for maximum light scattering. Abrasion resistant. Outstanding hiding power. This...
Coo-Var Prime-All is a multi-surface primer/sealer made with low odour solvents. Gives excellent coverage to a multitude of stains, helping to prevent it bleeding through the finishing coat. It is effective across many different surface types. Product Features Offers excellent stain blocking Alkali resisting properties across substrates...
