Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.
A natural paint with a matt finish suitable for exterior walls. Ideal for construction, restoration and repainting, it absorbs CO2, is free of all toxic substances and also highly breathable. The product contains lime which acts as a natural preservative thus eliminating the use of harmful chemicals and/or carcinogenic materials. Manufactured with Graphenstone technology, providing resistance, durability and prevention of condensation.
Suitable for plaster, gypsum, mortars, old paint, prefabricated panels and unlaminated wallpaper, brick or perlite
Contributes to energy savings due to its great reflective power and thermal emittance
Absorbs C02*
*The majority in the first 30 days of curing
Cradle to Cradle Certified Silver, GreenRate Certified Level A, Environmental Product Declaration
Absorbs CO2 (5.5kg per 15L). Three 15 litre buckets of paint absorbs more than 10Kg of CO2 in one year
Contributes to energy savings due to its great reflective power and thermal emittance
Mineral character reduces sound reverberation
Natural matte finish
High quality lime and Graphenstone Technology resists daily cleaning. Formula based on artisanal lime of maximum purity
Breathable with graphene fibres to regulate and distribute the temperature of a space, avoiding condensation and reducing cold spots
Outstanding adherence, resistance and durability
Excellent flexibility. No Cracking
Suitable for exteriors
Free of VOC emissions and formaldehydes
Cradle to Cradle Certified Silver
GreenRate Certified Level A
Environmental Product Declaration
Certifications
Environmental Product Declaration
The Environmental Product Declaration (EPD) is a verified and registered document that communicates transparent and comparable information about the life-cycle environmental impact of products
The International EPD System is a global programme for environmental declarations based on ISO 14025 and EN 15804
Global Green Tag
Graphenstone has developed a product range with a whole green life cycle. It complies with the Reuse, Reduce and Recycle philosophy, guaranteeing the most efficient use of materials
We independently assure that every product is fitness tested and certified under the most robust leading certification programmes, trusted and widely recognised in the world
Cradle To Cradle - Silver
Graphenstone has developed a product range with a whole green life cycle. It complies with the Reuse, Reduce and Recycle philosophy, guaranteeing the most efficient use of materials. We independently assure that every product is fitness tested and certified under the most robust leading certification programmes, trusted and widely recognised in the world
C2C Health Gold
Part of Cradle to Cradle, the certificate assesses the materials’ healthy nature and offers a reliable tool to evaluate and verify the use of safe chemicals
GreenTag Health Platinum
This is a label of great international prestige that guarantees the use of healthy products
The Platinum classification of this product places the Graphenstone as a world leader in the implementation of healthy materials in the paint and construction sector
Sensitive Choice
Global programme that identifies through research and testing those products that, due to their composition, benefit people with asthma or allergies
Application
The substrate must be dry, firm, well adhered, even and free of any impurities that could hinder the perfect bonding of the product
Any organic growth and/or other impurities should be removed by thorough cleaning using specific products for this purpose
Depending on the nature of the surface, the actions prior to application of the paint vary as follows:
Old glossy or satin paints and putties: clean the surface and sand softly
Absorbent substrates (e.g. concrete block or brick): apply AmbientPrimer
Very absorbent substrates (clay, adobe or rammed earth): apply Minerseal
Wood, metal (without corrosion or oxidation) or non-porous (e.g. glazed tiles, phenolic panel, epoxy or polyurethane paints): apply Four2Four
Shake and dilute with water using 5-10% per litre of product (Approx. 100-150ml water p/L). Ensure good mixing. Avoid excessive shaking to minimise bubble occlusion
Applicable by roller, brush, airless spray or other type of projection
Apply 2 or 3 coats evenly. Paint in sections, starting with borders. Without overloading the roller, dip it lightly into the paint to spread evenly. Do not paint over areas that are drying and avoid splices. Please note that an excess of product per coat can generate micro- fissures
Dries in 2-4 hours between coats and 24-hour drying time per coat at 25°C and 60% relative humidity. As it is a lime-based paint it is very important to respect the drying time between coats to realise optimal paint coverage
Clean tools after use with warm water
Total curing occurs after 30 days, presenting good hardness and resistance. It is advisable not to clean and/or scrub during this period
Limitations
Do not apply under direct sunlight or on surfaces heated by the sun
Mineral substrates must be at least 28 days old
The surfaces to be painted must be resistant to high alkalinity
Do not apply to surfaces in permanent contact with water
In case of rain, let the surface dry completely before application. It is recommended to protect the treated surface from the rain for 4 days
For decorative glazing and/or the application of self-adhesive templates or other types of masking, please allow 36 hours to elapse
Parts that are not going to be treated should be protected (glassware or carpentry)
Should there be any strict aesthetic requirements, it is recommended to carry out preliminary tests
Do not mix with other brands to maintain product efficacy
Product Details
G1PE03012UK1010
Data sheet
Manufacturer
Graphenstone
For Use By
Consumer Use
Interior / Exterior Use
Exterior Use
For Use On
Plaster, gypsum, mortars, old paint, prefabricated panels and unlaminated wallpaper, brick or perlite.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Graphenstone Biosphere is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
A primer that regulates and reduces the absorption of the substrate. It is recommended for absorbent substrates and for use prior to the application of AmbientPro+ as it guarantees the stability and durability of the photocatalytic system over time.Suitable for interior and exterior use on all surface types common to construction: plaster,...
An adherence bridge for paint. It ensures adhesion on all surface types and is suitable for interior and exterior application. In addition, it acts as an antioxidant on metal substrates (free of corrosion or oxidation) and as a wood / MDF sealant on interior walls.Suitable for all surface types Outstanding resistance and durability 100ml...
A natural paint with a matt finish suitable for interior walls. Ideal for construction, restoration and repainting, it absorbs CO2, is free of all toxic substances and also highly breathable. The product contains lime which acts as a natural preservative, thus eliminating the use of harmful chemicals and/or carcinogenic materials. Manufactured...
Mineral based consolidating treatment that does not alter the permeability of the substrate to gases or water vapor. Consolidates substrates with poor adhesion (sandy, dusty, etc.) and reduces absorption of highly absorbent substrates.Suitable for exposed mineral substrates such as rendering, plastering, concrete, calcareous sandstone,...
Buy samples of Graphenstone products to trial their colours and finishes. Absorbs C02, the majority in the first 30 days of curing.Available in popular Graphenstone products:GrafClean Matt GrafClean Eggshell Biosphere Ecosphere Ambient Pro GCS Interior GCS Exterior Ambient Primer L42 Four2FourSelect an item from the...