

Use Magpaint Europe Beamer Paint For Pros to transform smooth interior surfaces, providing a sharp picture and rich contrast for beamer projection. Ideal for presentations and business environments.
The two-part paint consists of a primer and finish that can be applied to large and unusual surfaces to optimise for projection and is ideal for individual formats and curved walls. It is architectonically sophisticated, as the projection surface is integrated
Beamer Paint can also be applied outdoors provided that the fresh layers of paint are not exposed to weather influences, wind and sunlight. BeamerPaint does not degrade or yellow under the influence of UV radiation.
Before the projector paint can be applied, the surface must be stable (weight bearing), dry and clean. The subsurface must comply with the requirements set for gypsum substrates (level 4), or at least with a comparable classification.
Apply BeamerPaint Base and Finish as a spray or with a Velour paint roller - it is essential to use clean tools.
Base:
The substrate must be clean, dry, grease-free and stable. See ÖNORM B 3430-1. Substrates must at least meet the requirements for quality level Q4 for plaster substrates. All other surfaces must be prepared in accordance with this quality level.
Do not process at a temperature below +8°C and /or when the relative humidity exceeds 80%.
Apply two layers of BeamerPaint Base with 5-6 hours in between.
Allow the BeamerPaint Base to dry for 5-6 hours before starting to apply BeamerPaint Finish.
Finish:
Apply two layers of BeamerPaint Finish undiluted with 5-6 hours in between.
After applying the entire paint system, the surface should not be sanded to avoid ruining the look.
BeamerPaint is ready for use as soon as the last layer of BeamerPaint Finish is dry.
BeamerPaint Base:
Approx. 5 m²/l. per layer, depending on a number of factors, such as porosity and roughness of the substrate and material loss while applying.
BeamerPaint Finish:
Approx. 10 m²/l. per layer, depending on a number of factors, such as porosity and roughness of the substrate and material loss while applying. With one packaging of 2 litres of Base and 1 litre of Finish, a 5 m² surface can be treated.
Base:
Drying Time | |
---|---|
Tack-Free | Approx. 30 minutes |
Repaint | 5-6 hours |
Ready To Use | N.A. |
Finish:
Drying Time | |
---|---|
Tack-Free | Approx. 1 hour |
Repaint | Approx. 5-6 hours |
Ready To Use | Approx. 2 hours; leave approx. 1 week for the ultimate quality |
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
![]() | Question:
Hi, I am looking to buy the following: "Magpaint Europe Beamer Paint For Pros" Is the paint flamable or is it waterbased? Thanks |
Answer from Rawlins’ Technical Team:
This is waterbased and contains minimum volatile organic compounds (VOC) | |
Magpaint Europe Beamer Paint For Pros is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT