Zinsser Write-On Paint
  • Zinsser Write-On Paint

Zinsser Write-On Paint

ZN735-KIT

Zinsser Write-On Paint allows you to turn any wall in your home, office or classroom into a creative centre. It is a white coating that transforms ordinary walls into a dry-wipe surface in just one coat.

After simple installation you will be able to use standard dry-wipe markers* on your walls. Ideal for use on painted interior surfaces such as plasterboard, hardboard, wood, cement and metal.

  • Quick and easy application
  • Dries in 4 hours
  • Writable in 5 days
  • One coat system
  • Tough and durable
  • Compatible with standard dry wipe markers* and cleaners
  • Use on walls, doors and more
  • Indoor use

**Available for delivery - see Delivery Options below**

Colour
Size
Finish
£159.04
VAT excluded

£190.85 Tax incl.
Quantity

Description

Zinsser Write-On Paint allows you to turn any wall in your home, office or classroom into a creative centre. Zinsser Write-On Paint is a white coating that transforms ordinary walls into a dry-wipe surface in just one coat. After simple installation you will be able to use standard dry-wipe markers* on your walls.

Zinsser Write-On Paint is ideal for use on painted interior surfaces such as plasterboard, hardboard, wood, cement and metal (For optimum performance we recommend following the application instructions exactly and with care).

Features & Benefits

  • Quick and easy application
  • Dries in 4 hours
  • Writable in 5 days
  • One coat system
  • Tough and durable
  • Compatible with standard dry wipe markers* and cleaners
  • Use on walls, doors and more
  • Indoor use

Pack Contents:

  • Zinsser Write-On Paint Base Part A (2L).
  • Zinsser Write-On Paint Activator Part B (500ml).
  • Large microfibre roller.

You Will Need:

Preparation
For best results, apply over a pre-painted, white or light coloured surface. If applying to a new surface use a suitable white, water-based primer first, eg. Zinsser Bulls Eye 1-2-3 (follow manufacturer’s directions). Do not apply directly onto Vinyl Matt or other ‘weakly bound’ paint films. The product may be applied over Vinyl Silk or water based Acrylic Eggshell.

Application
Pour approximately half of Part B into Part A and stir until mixed in then add the remainder of Part B and stir thoroughly for about 2 minutes (until a uniform colour is achieved). We recommend using the enclosed micro-fibre roller which is designed to give a smooth, uniform finish, alternatively use a short-pile mohair roller. Use a paint brush if necessary for edging. When applying this over darker coloured surfaces prepare first with a suitable white primer (see Preparation above). Dries to the touch in 4 hours. Note that once activated the workable pot life of this product is 4 hours. There is enough product in this pack to cover 30m². Only one coat of Zinsser Write-On Paint should be applied.

Use
Allow the painted surface to cure for 5 days at 20°C before applying any markings (allow more time in cooler temperatures). If in doubt leave the coating longer to cure prior to writing on the surface. Once fully cured dry wipe markers may be applied to surface and then wiped off with an eraser or lint free cloth.

Tips

  • Tape desired area with low tack masking tape.
  • Do not use abrasive cleaners or cloths on the cured product.
  • If ghosting of the dry wipe marker occurs, clean the surface with a white board cleaning solution and leave the surface for 24 hours prior to use.
  • All drying times are for when applied at 20°C and max 85% humidity, lower temperatures and a higher humidity will prolong the drying times.
  • Do not continue to use the mixed product for longer than 4 hours after mixing.
  • After application the roller should be discarded.
  • Application brushes can be cleaned with white spirit.

*Whilst most dry wipe markers are suitable it is recommended to check ease of removal of your chosen dry wipe marker pens on a small test area first.

Product Details
ZN735-KIT

Data sheet

Manufacturer
Zinsser
Interior / Exterior Use
Interior
For Use On
Plasterboard, Hardboard, Wood, Cement, Metal
Sheen
Gloss
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Two-Pack
Pack Size
30m² Pack
Coverage
30m² Per Pack
Touch Dry
4 Hours
UN Number (Activator)
UN3267
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Paula on 2018-05-24 16:41:54
Question: 

Can Zinsser write on paint be applied to breeze blocks?

Answer: 

Assuming the breeze blocks are paint grade and  have a smooth finish with no blow holes in then the Zinsser Write-On Paint should be OK. Prime with 2 of coats of Zinsser Bulls Eye 1-2-3.

If the surface is not smooth, another option may be to apply a plaster skim to the blocks then seal with Zinsser Gardz followed by a coat of Zinsser Bulls Eye 1-2-3 and then Zinsser Write-On Paint.


Question about the product

* Required fields
(read)
Send