HMG SQ26 Crackle Top Coat is an air dried special effect finish, originally developed for ultra high quality interior decorative domestic and industrial applications.
This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:
| 3-Pack System Details | |||||
|---|---|---|---|---|---|
| Base (Part 1) | HMG SQ26 Crackle Base Coat | ||||
| Top Coat (Part 2) | HMG SQ26 Crackle Top Coat | ||||
| Thinner (Part 3) | HMG SQ26 Crackle Coat Thinner 2738 | ||||
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
HMG SQ26 Crackle Top Coat is an air dried special effect finish, originally developed for ultra high quality interior decorative domestic and industrial applications.
Please note this product is one part of a three-pack system which MUST be purchased/used together with HMG SQ26 Crackle Base Coat and HMG SQ26 Crackle Coat Thinner 2738
For application on the tough, flexible and adherent SQ26 Base Coat, which can be applied over all suitably primed substrates.
| Technical Data | |
|---|---|
| Volume Solids: | 45.8% |
| VOC Content: | 0.700kgs/ltr |
| SG: | - |
| Viscosity: | 200 mPas |
| Density: | 1.025 g/cm³ |
| Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. |
| Shelf Life: | 12 months from delivery date in original sealed containers. |
| Flash Point: | - 4°C |
| Product Data | |||
|---|---|---|---|
| Dry Film Thickness | Wet Film Thickness | ||
| Compliant Spray: | 20 μm | 50 μm | |
Coverage: 10 square metres per litre @ 20 microns dft (Theoretical).
| Drying Times At 20°C | |
|---|---|
| Touch Dry: | 10 minutes |
| Fully Cured: | 45 minutes |
| Technical Data | |||||
|---|---|---|---|---|---|
| Compliant Spray Gun | |||||
| Mixing Ratio: | Base: 1 | ||||
| Thinner: 1 | |||||
| Thinner Options: | Thinner 2738 | ||||
| - | |||||
| Viscosity: | 30 - 35 seconds B4 cup | ||||
| Spray Gun Setup: | 1.4 - 1.8 | ||||
| Number Of Coats (Guide Only): | 1 Full Coat | ||||
| Flash Off: | - | ||||
For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]
| Information on basic physical and chemical properties | |
|---|---|
| Form: | Liquid |
| Colour: | According to product specification |
| Odour: | Characteristic |
| Odour Threshold: | Not determined |
| pH-value: | Not determined |
| Melting point/freezing point: | Undetermined |
| Initial boiling point and boiling range: | 80°C |
| Flash Point: | - 4°C |
| Flammability (solid, gas): | Not applicable |
| Ignition temperature: | 370°C |
| Decomposition temperature: | Not determined. |
| Auto-ignition temperature: | Product is not selfigniting |
| Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." |
| Explosion limits: Lower: | 1.1 Vol % |
| Explosion limits: Upper: | 10.04 Vol % |
| Vapour pressure at 20°C: | 29 hPa |
| Density at 20°C: | 1.025 g/cm³ |
| Relative density: | Not determined |
| Vapour density: | Not determined |
| Evaporation rate: | Not determined |
| Solubility in / Miscibility with water: | NOT MISCIBLE |
| Partition coefficient: n-octanol/water: | Not determined |
| Viscosity: Dynamic at 20°C: | 250 mPas |
| Viscosity: Kinematic: | Not determined |
| Solvent content: Organic solvents: | 56.8% |
| Solids content: | 45.8% |
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
HMG SQ26 Crackle Top Coat is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG SQ26 Crackle Base Coat is an air dried special effect finish, originally developed for ultra high quality interior decorative domestic and industrial applications. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:3-Pack System DetailsBase (Part 1) HMG SQ26...
HMG SQ26 Crackle Coat Thinner 2738G is thinner designed specifically for use with the HMG SQ26 Crackle Coat system. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:3-Pack System DetailsBase (Part 1) HMG SQ26 Crackle Base CoatTop Coat (Part 2) HMG SQ26 Crackle...
