• Mathys Plastopan Latex

Mathys Plastopan Latex

86.1.5

Mathys Plastopan Latex is a water based, extra white, flexible putty filler for equalising inside walls before applying a latex coating. Easy to apply, easy to sand and can be used on alkaline substrates.

  • Easy to apply
  • Easy to sand
  • Can be applied on alkaline substrates
Colour
Size
£17.78
VAT excluded

£21.33 Tax incl.
Quantity

Description

Mathys Plastopan Latex

Mathys Plastopan Latex is a water based, extra white, flexible putty filler for equalising inside walls before applying a latex coating.

Features & Benefits

  • Easy to apply
  • Easy to sand
  • Can be applied on alkaline substrates

Technical Data

  • Density: ± 1,9
  • Gloss Level: Matt
  • Solids content in volume: ± 63 %
  • Solids Content in weight: ± 80 %

Drying Times At 20°C/RH 50%

Dry to recoat: 24 hours

Theoretical Consumption

± 3 kg/m²

Practical Consumption

Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.

Surface Preparation

Clean the substrate thoroughly. Remove old and loose coating layers. Do not apply on powdering and chalking layers. Can be applied without applying a primer.

Directions For Use

Apply in a dry and well-ventilated area. Apply without thinning using a putty knife.

Application Conditions

Apply in a dry and well-ventilated area. Water.

Remarks

Apply Plastopan Latex in thin layers.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
86.1.5

Data sheet

Density
± 1,9
Solids by Volume
± 63 %
VOC
15.2 g/l
Shelf Life (from date of manufacture)
2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Touch Dry
24 Hours
Recommended Dry Film Thickness
± 1,0 mm
Recommended Wet Film Thickness
± 1,6 mm
UN Number
Not regulated
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send