Mathys Pegaprim Exterior
  • Mathys Pegaprim Exterior

Mathys Pegaprim Exterior

85.PN.5P

Mathys Pegaprim Exterior is an acrylic primer for exterior applications which can be applied to most mineral substrates that neutralises differences in the absorption characteristics of the substrate.

  • Reinforces the substrate and reduces absorption
  • Neutralises differences in absorption characteristics
  • Prevents differences in the glossiness of the topcoat
  • Very good hiding characteristics
  • Improves topcoat adhesion
  • Water vapour permeable
Colour
Size
Finish
£38.18
VAT excluded

£45.81 Tax incl.
Quantity

Description

Mathys Pegaprim Exterior

Mathys Pegaprim Exterior is an acrylic primer for exterior applications which can be applied to most mineral substrates.It neutralises differences in the absorption characteristics of the substrate which provides substrates with uniform absorption and colour.

Features & Benefits

  • Reinforces the substrate and reduces absorption
  • Neutralises differences in absorption characteristics
  • Prevents differences in the glossiness of the topcoat
  • Very good hiding characteristics
  • Improves topcoat adhesion
  • Water vapour permeable

Technical Data

  • Density: ± 1,35 (weiss)
  • Gloss Level: Matt
  • Gloss level at 60º: Matt: ± 5%
  • Solids content in volume: 45 % (weiss)
  • Solids Content in weight: 58 % (weiss)

Drying Times At 20°C/RH 50%

  • Touch dry: 1,5 hours
  • Dry to recoat: 2-3 hours
  • Fully cured: 1 week

Theoretical Consumption

± 8 - 10 m²/l

Practical Consumption

Depends on several factors such as porosity and roughness of the substrate and material losses during application (see DIN 53220).

Surface Preparation

The substrate should be dry, clean and free of grease. Pegaprim Exterior may be directly applied over normally porous substrates and old, cleaned paint layers if they are in good condition. Not suitable for highly porous substrates; use Pegafix as a fixator in such cases.

Directions For Use

The product should be thoroughly stirred before use, to ensure homogeneity.

Application Conditions

> 5°C, < 80% R.H.

Application Methods

  • Brush: Use undiluted.
  • Roller: Use undiluted.
  • Airless Spray: Nozzle: 011 - 015 / Pressure: 180 - 200 bar. Apply undiluted
  • Air-Atomised Spray: Use undiluted.


It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
85.PN.5P

Data sheet

Manufacturer
Rust-Oleum
Application
Brush, Roller, Spray
Touch Dry (at 20°C)
1,5 hours
Dry to Recoat (at 20°C)
2-3 hours
Fully Cured (at 20°C)
1 week
Min. Application Temperature
5°C
VOC
30 g/l
Recommended Dry Film Thickness
45 µm
Recommended Wet Film Thickness
100 µm
UN Number
Not regulated
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

Mathys Pegafix

Mathys Pegafix is a colourless impregnating primer for porous, mineral substrates such as concrete, breeze block, bricks, etc. before painting them with waterborne paints. High fixing capacity Superior penetration characteristics Water based

Price £24.71
In stock