Thermilate PRO Stabilising Primer
Thermilate PRO Stabilising Primer is a water-based primer specially formulated to seal unstable areas which remain powdery and chalky after the surface has been thoroughly prepared for painting with Thermilate PRO Insulating S-Flex Coating or Thermilate PRO Insulating T-Flex Coating.
Thermilate PRO Stabilising Primer is a water-based primer specially formulated to seal unstable areas which remain powdery and chalky after the surface has been thoroughly prepared for painting with Thermilate PRO Insulating S-Flex Coating or Thermilate PRO Insulating T-Flex Coating. Thermilate PRO Stabilising Primer is great for preparing old walls prior to re-skimming and can be applied to brick, stone, render, concrete, plaster, pebbledash, stucco, existing painted surfaces, friable surfaces, etc.
Thermilate PRO Stabilising Primer when cured, is a colourless, low odour single component, low viscosity primer that cures quickly enabling rapid overcoat times. Its unique formulation make it easy to apply and achieve an even and seamless finish and can even be applied to damp surfaces.
Features & Benefits
- Highly Penetrating
- Suitable for use under water-based masonry paints.
- Stabilises powdery masonry surfaces.
- Penetrates deeply into dusty chalky and badly weathered surfaces.
- Suitable for both internal external use.
- Single component - spreads easily, cures quickly for rapid over-coating.
- Superior moisture resistance aids year round use.
- Higher strength & better chemical resistance than traditional sealer’s.
- Stops oil & other stains & incorporates a UV filter.
- Improved impact & abrasion resistance - prolongs performance life.
- Reduces and eases routine maintenance.
- Ease of future refurbishing without the need to strip
IMPORTANT: If you are a professional contractor please call 0113 2455450 or email [email protected] for special rates on this product and to find out more about becoming an approved applicator.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close