Rust-Oleum Mathys Murfill Reinforcement Fleece
  • Rust-Oleum Mathys Murfill Reinforcement Fleece

Rust-Oleum Mathys Murfill Reinforcement Fleece

SM100G

A reinforcement fleece for the first coat of Murfill Waterproofing Coating on structural surfaces where required. When fleece is introduced it offers maximum durability, flexibility and strength to the system.

  • Made out of polyamide fibres
  • Available in woven in block meshes or non-woven 
  • Typically rolled/brushed into the first coat while wet. A polyester woven mesh, flexible and elastic.
Size
£143.19
VAT excluded

£171.83 Tax incl.
Quantity

Description

A reinforcement fleece for the first coat of Murfill Waterproofing Coating on structural surfaces where required. When fleece is introduced it offers maximum durability, flexibility and strength to the system.

  • Made out of polyamide fibres
  • Available in woven in block meshes or non-woven 
  • Typically rolled/brushed into the first coat while wet. A polyester woven mesh, flexible and elastic.

Please refer to the product data sheet/system specification before use.

Please contact us for further details/help.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
SM100G
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

407 Multi Surface Primer

This low odour, high opacity white primer/sealer is suitable for most surfaces including tiles, wood, metal (including galvanised), plaster, existing paint, masonry and most plasics (test a small area first).

Price £23.39
In stock

Eagle Quick Drying Bitumen Primer

Eagle Quick-Drying Bitumen Primer provides a key on substrates for all bituminous roof paints and surface coatings, applying by brush or sprayer, and requires no thinning. Use on substrates and surfaces that include: Fast-drying - 3-4 hours Ready for use 6 -10m² per litre coverage Suitable for use with all bituminous surface coatings...

Price £18.25
In stock

Mathys Pegafix

Mathys Pegafix is a colourless impregnating primer for porous, mineral substrates such as concrete, breeze block, bricks, etc. before painting them with waterborne paints. High fixing capacity Superior penetration characteristics Water based

Price £26.09
In stock

HMG Uniblok Sealer

HMG Uniblok Sealer is a 1K air drying sealer / isolator for sealing synthetic enamels against attack when overcoating with stronger solvent systems such as cellulose, 2K finishes etc. Outstanding sealing properties. Suitable for a wide variety of automotive, industrial & decorative applications. Click to jump down to Technical Data...

Price £28.69
In stock

Mathys Pegaflex

Mathys Pegaflex is an acrylic levelling filler for indoor and outdoor use on vertical and overhead surfaces requiring small/fine repairs.  High flexibility and elasticity Excellent adhesion on all sound substrates and paints Perfect alkali resistant Not affected by ageing thus keeping its original flexibility Sufficiently hard, but can...

Price £7.24
In stock

Blackfriar Anti-Mould Solution

Blackfriar Anti-Mould Solution kills mould and inhibits regrowth. Use it inside and out to eliminate unsightly mould prior to decorating on many surfaces including tiles, plaster, wallpaper, paving slabs and slate. Product Details Powerful mould killing solution. Use on tiles, plaster, wallpaper, paving slabs, marble and more. Odourless....

Price £19.99
In stock

Thermilate PRO Stabilising Primer

Thermilate PRO Stabilising Primer is a water-based primer specially formulated to seal unstable areas which remain powdery and chalky after the surface has been thoroughly prepared for painting with Thermilate PRO Insulating S-Flex Coating or Thermilate PRO Insulating T-Flex Coating.

Price £51.64
In stock

Mathys Mur-Filler

Mathys Mur-Filler is an elastic joint filler that contains quartz for the preparation of active and non-active cracks, can be used interior and exterior. Elastic High filling power Not sandable (contains quartz)

Price £3.49
In stock

Zinsser Gardz

A unique water-based sealer for porous and potential problem surfaces. Gardz® is formulated to deeply penetrate and dry to a hard, moisture resistant film that seals and binds down porous, chalky and crumbling surfaces, paints and textured finishes.

Price £9.75
In stock

Blackfriar Stabilising Solution

Blackfriar Stabilising Solution binds and seals powdery and porous surfaces prior to decoration. Provides a firm foundation on unstable surfaces such as old lime wash and distemper. Product Features Binds and seals powdery surfaces. Ideal for old limewash and distemper. Water-based. Interior and exterior use

Price £17.23
In stock

Sikagard 552 W Aquaprimer

Sikagard 552 W Aquaprimer is one component water dispersed adhesion promoting primer for water dispersed polymer paint coatings. It is part of a system that complies with the requirements of EN 1504-2 as protective coating: Priming coat for concrete and dense mineral substrates like fibre cement, aerated concrete, gypsum and smoothing...

Price £88.81
In stock

Mathys Paracem Deco Primer

Mathys Paracem Deco Primer is a water based interior primer for use on various porous surfaces prior to painting with water based paints. Reinforces the substrate and reduces absorption Neutralises differences in absorption characteristics Prevents differences in the glossiness of the topcoat Very good hiding characteristics Improves...

Price £29.93
In stock

Mathys Plastopan Latex

Mathys Plastopan Latex is a water based, extra white, flexible putty filler for equalising inside walls before applying a latex coating. Easy to apply, easy to sand and can be used on alkaline substrates. Easy to apply Easy to sand Can be applied on alkaline substrates

Price £16.93
In stock

HMG Uplas Primer

HMG Uplas Primer is a medium solids Cellulose based Basecoat / Sealer for use on wood and veneer. A 1K coating specifically designed to promote adhesion to various plastic substrates. Quick drying Can by overcoated with a wide variety of HMG systems. Click to jump down to Technical Data

Price £17.37
In stock

Zinsser Peel Stop

Zinsser Peel Stop Primer is a clear coating to help prevent peeling, flaking, cracking, dusting or chalking. Internal/external use Glues down edges of old coatings Recoatable in 2 hours Seals and bridges cracking and crazing Binds chalky surfaces Flexible/Breathable Easy to use Easy to clean

Price £8.35
In stock

Rust-Oleum Mathys Primer 44 HS

Rust-Oleum Mathys Primer 44 HS has a large fixation capacity for stabilising loose particles and improving the adherence of subsequent topcoats. Features and Benefits Unsaponifiable Good UV resistance Excellent fixation on roofs Very flexible   Chlorinated rubber technology, solvent-based  Quickly water-resistant (1 hour after...

Price £47.77
In stock